Isle of Wight · England
Yaverland Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Yaverland. Fully insured, ARBOMaster approved and guaranteed for a year.
- Fire stopping disturbed by later work
- Standard silicone or caulk in a fire-stopping gap
- Cracked or shrunken fire-rated sealant
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Include hidden areas like risers in routine checks
- Keep the record of products and locations with your fire safety documents
- Photograph sealed gaps before they’re covered up
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record so you can show it was dealt with.
Fire rated sealant in Yaverland
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. We work on service penetrations, plasterboard & masonry and flats & HMOs, and people most often call us about fire stopping disturbed by later work and open holes round services passing through fire walls.
Somewhere as small as Yaverland, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Our work is backed for twelve months.
- Where
- Yaverland (PO36)
- Region
- Isle of Wight
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Yaverland
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured for the work.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
What sealant work can’t fix
We won’t take on work that will not last, so these are the limits:
- Construction that does not provide fire resistance on its own
- Problems with the door itself rather than the gap around the frame
- Issuing a fire rating or certificate for a building
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly.
What we seal
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Door frames
- Linear gaps
- Plasterboard & masonry
More services for Yaverland
Quotes for fire rated sealant in Yaverland
Call for a quick quote. The main things that affect it are:
- The size of the job
- Access and height
- Whether there’s mould to deal with
- The old material and how stubborn it is
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, call 0345 464 0079 or drop us an email for an honest opinion and a quote.
Helping us quote
To help us quote quickly, please include:
- Whether it’s a home or a business
- Roughly how big the job is
- The address or postcode of the job
- Access, such as stairs, a lift or height
We do not publish a price list. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or send us an email.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Questions from Yaverland
Will you come out to Yaverland?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work in hotels near Yaverland?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
How much does fire rated sealant cost in Yaverland?
Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.
Can I choose the sealant colour?
In most cases you can choose. We will explain which colours are available.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
Will you assess my building’s fire safety?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Surface by surface
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service to make sure it suits the product.
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist.
Fire rated sealant in Yaverland: local notes
For seaside hotels, guest houses and holiday lets around Yaverland, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Yaverland has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
Letting a property close to Brading station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Managing a site like The Bay Church of England School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. Community buildings like St John the Baptist Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Yaverland is about 4 miles south of Ryde, in the Isle of Wight. Anywhere in PO36, we can carry out fire rated sealant at your property. We cover 125 towns and villages across the Isle of Wight, from the larger towns to small villages. We also work in Portsmouth, about 10 miles from Yaverland.
All of PO36 is within our area for fire rated sealant, from the main roads to the quietest streets. You will find streets such as Meadow Way, Yaverland Close and Yaverland Road, all of which we cover. If you are just outside Yaverland, we cover Yarbridge (1 mile north-west), Morton (1 mile north-west), Brading (1 mile north), Sandown (1 mile south-west) and Adgestone (1 mile north-west). Larger places within reach include Newport (8 miles west), Ryde (4 miles north), Cowes (10 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (9 miles north-west). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.
Around Yaverland
Typical jobs here are in homes near The Caulkheads pub and Sandown Bay Academy and the streets around them. For rail, the closest station is Brading station, roughly 1 mile north of the centre. Well-known places in the area include Sandown Castle (0.7 miles south-west) and Arthur Webster Memorial Hospital for Children (2.8 miles south-west). The countryside around Yaverland includes Bembridge Down and Brading Marshes RSPB reserve.
How it works
At the end, we look at the finished work together. The visit itself normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. For a village or hamlet like Yaverland, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Getting ready for the visit
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
- Mention any parking rules near the property
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.