Isle of Wight · England
Bathroom Resealing in Morton
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Morton and across the Isle of Wight. Fully insured, ARBOMaster approved and guaranteed for a year.
- Two layers of silicone, both failing
- A bead that has pulled away from the tiles
- Mouldy sealant that has gone black
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
We also work for property managers and facilities teams. Several sites can be quoted together.
About our bathroom resealing in Morton
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We work on sinks & splashbacks, wet rooms and baths, and the jobs we see most are gaps where the bath or tray has moved and water getting behind the kitchen upstand.
Homes around Morton are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or send us an email.
- Where
- Morton (PO36)
- Region
- Isle of Wight
- Guarantee
- One year on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
What we are called out for in Morton
Black mould is behind a lot of resealing. Bathrooms without good ventilation give mould all the damp it needs, and mould that has grown into the silicone generally will not clean off.
Look out for any of the following:
- Gaps between the worktop and the wall
- Leaks into the floor or ceiling below
- Gaps where the bath or tray has moved
- A messy, uneven bead from a previous reseal
Schools such as Brading Church of England Controlled Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- What product goes in the joint
- Whether VAT is included
- Is the old sealant removed completely?
- What happens if the job turns out different
Your questions about bathroom resealing in Morton
Do you work for landlords with property near Brading station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do you take on hotel work around Morton?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
What should I tell you?
The location, the problem and the rough size of the job. If you can, email a few pictures.
Can you just seal over the old silicone?
No. A bead laid over old silicone soon starts to come away, because silicone does not bond to silicone. We remove the old bead completely before resealing.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Does the resealing come with a guarantee?
Yes, a 12-month guarantee. Looking after the joint as we suggest helps it last.
What colours of sealant can you use?
We can use white, clear or a colour to suit. On a worktop we colour-match where the joint shows.
What does bathroom resealing cost?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
What else we do in Morton
Bathroom resealing around Morton
Morton is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. There are hotels and other places to stay in and around Morton. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For an older house near a landmark such as St. Mary's Church, older homes can move a little, which is hard on rigid grout and tired sealant. For landlords with property near Brading station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Morton is about 1 mile north-east of Sandown, in the Isle of Wight. Jobs in Morton get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 125 places in the Isle of Wight are on our list. There’s also a page for Portsmouth, roughly 10 miles from Morton.
We cover every part of the PO36 postcode area for bathroom resealing. That includes homes and businesses on New Road, Wrax Road and Morton Road. Being close to the A3055, Morton is easy for our applicators to reach. Neighbouring places we cover for bathroom resealing include Yarbridge (1 mile north-east), Brading (1 mile north-east), Adgestone (1 mile west), Yaverland (1 mile south-east) and Sandown (1 mile south-west). We also work in nearby towns such as Newport (7 miles west), Ryde (4 miles north), Cowes (9 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Landmarks near Morton
Around Morton, our work takes us to homes and buildings near Sandown Bay Academy, The Bay Church of England School and The Bugle Inn, among other places. The closest station to Morton is Brading station, roughly 0.6 miles north-east. A little further out are Sandown Castle (1.1 miles south) and Brading Waxworks (0.5 miles north). The countryside around Morton includes Brading Marshes RSPB reserve and Brading Down.
Quotes for bathroom resealing in Morton
We quote each job individually. This is what makes a difference:
- How easy the joints are to reach
- The type of sealant required
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
Asking for a quote
Before you ask for a quote, have a think about:
- How we’d reach the joints
- The address or postcode of the job
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
The process
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take half a day or less for one room, longer when the kitchen is included. In a small place like Morton, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by protecting the area and stripping out the old bead.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, normally around 24 hours.
Before we arrive
- Mention any parking rules near the property
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job.
Read more
Different surfaces, different methods
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. We seal them in a colour that suits the worktop, so the line doesn’t stand out.
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The bead is finished smooth so it wipes clean.
When something else is needed
A few problems are outside what sealant work can do:
- A tray or bath that’s cracked through
- Water coming from the plumbing rather than the joint
- Damage behind the tiles that needs a tiler
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think.
Surfaces we seal
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks