Isle of Wight · England
Bathroom & kitchen resealing in Brading, Isle of Wight
Bathroom resealing in Brading from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- A joint torn by a bath that flexes
- A messy, uneven bead from a previous reseal
- Sealant that has split, shrunk or peeled away
About our bathroom resealing in Brading
Kitchens need the same care as bathrooms. Worktop upstands, sink edges and splashback joints get wet every single day, and water behind a laminate worktop can make it swell. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. We work on shower trays & enclosures, kitchen worktops & upstands and wet rooms, and common reasons people get in touch are black mould in the silicone that won’t clean off and a bead that has pulled away from the tiles.
Around Brading, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Brading (PO36)
- Region
- Isle of Wight
- Cover
- A year, on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why act early in Brading
Tired sealant isn’t a reason to replace a bath or shower. A new bead often brings the whole room back. If something else is wrong, we will tell you. Around Brading, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Why book with us
- Tidy, careful work
- White, clear, grey or another colour, product permitting
- Every job guaranteed for a year
- Trusted Arbo and Everbuild sealants
Brading homes and their sealant
Brading is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Brading station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Schools such as Brading Church of England Controlled Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. In the older streets around St. Mary's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Brading is about 3 miles south of Ryde, in the Isle of Wight. Homes, rented property, offices and hotels in Brading is covered for bathroom resealing. The work is guaranteed for a year. Across the Isle of Wight, we cover 125 places, Brading among them. For nearby work, see our Portsmouth page, about 9 miles away.
Postcode districts we cover here for bathroom resealing: PO36. Local streets include Station Road, High Street and Wrax Road, all of which we cover. With the A3055 close by, Brading is easy for our applicators to reach for bathroom resealing. We also cover Yarbridge (1 mile south), Morton (1 mile south-west), Adgestone (1 mile south-west), Yaverland (1 mile south) and Gaskins (1 mile north-east). We also work in nearby towns such as Newport (7 miles west), Ryde (3 miles north), Cowes (9 miles north-west), Shanklin (4 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). If you are somewhere remote, the job takes a little more planning.
What’s near Brading
Locally, jobs take us to homes and businesses close to The Bugle Inn and Sandown Bay Academy. There’s a railway station in Brading itself: Brading station. Nearby you will also find Sandown Castle (1.5 miles south) and Brading Waxworks (within half a mile north). Open spaces near Brading include Brading Marshes RSPB reserve and Brading Down.
Looking after it afterwards
To keep the joints looking good and working properly:
- Move toiletries away from the joint
- Stick to a soft cloth and a mild cleaner
- Check the joints every few months for splits or lifting
- Give the silicone its full cure time
Keep water off the new bead until it has cured, which is usually around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
Different surfaces, different methods
Shower trays & enclosures
If a tray moves underfoot, new silicone will not last. We check for movement before we reseal, and tell you if it needs re-bedding first.
Wet rooms
In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, and our work is on the visible joints only.
When something else is needed
A few problems are outside what sealant work can do:
- A bath or tray that moves because it isn’t properly supported
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Baths
- Sinks & splashbacks
What affects the quote in Brading
Every job gets its own quote. These are the things that affect it:
- Which sealant suits the joint
- Mould in or behind the old joints
- How easy the joints are to reach
- When we can work, for business premises
Leaving a failed joint generally makes the job bigger, not smaller. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email for an honest opinion and a quote.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- Any previous sealing or DIY work
- Where the job is, and your postcode
- Photos by email, if that’s easy
- Roughly how big the job is
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it generally takes half a day or less for one room, longer when the kitchen is included. Somewhere like Brading needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
Preparing for the visit
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
- Tell us about any water getting in
Getting a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Related advice
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Your questions about bathroom resealing in Brading
Is Brading within the area you cover?
Yes, Brading is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do bathroom resealing in Brading?
Yes, Brading is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it usually cannot be cleaned out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
Can I choose the colour of the sealant?
We can use white, clear or a colour to suit. Where the joint is on show, we match it to the surface.
Do you guarantee your resealing?
Yes. Our one-year guarantee covers every job, and we’re ARBOMaster approved applicators.
Can you just seal over the old silicone?
No. Fresh silicone can’t stick to the old bead, so it lifts and traps water and mould underneath. All the old sealant comes out first.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.