Isle of Wight · England
External & façade joints in Brading, Isle of Wight
Sealing brickwork movement joints, render, cladding and façade joints for homes and businesses in Brading and across the Isle of Wight. Fully insured, ARBOMaster approved and guaranteed for a year.
- Sealant pulling away from one side of the joint
- Hard, crazed mastic that has stopped moving
- Movement joints with cracked, split or missing sealant
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Cutting new joints into brickwork, which is building work rather than sealant work
- Subsidence or other structural problems
- Loose or hollow render, which needs re-rendering
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Where we work in Brading
- Concrete & block
- Façade panels
- Joints between brick and frames
- Brickwork movement joints
- Copings & trims
- Render & cladding joints
External mastic in Brading
Getting the depth right is half the job. Backing rod controls how deep the sealant goes and keeps it off the back of the joint, leaving it bonded to two faces so it can move with the wall. If you are dealing with weeds or debris growing in open joints and joints with sealant missing in places, we can put it right, on joints between brick and frames, render & cladding joints and façade panels alike.
Somewhere as small as Brading, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Brading (PO36)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Other services in Brading
Why act early in Brading
Low-modulus sealants stretch easily, so they put less strain on the joint edges. That matters on brick, render and concrete, which can be weaker at the face. Too stiff a sealant can pull at the edges and break them. Where a wall is exposed, as many are in small places like Brading, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Tidy, careful work
- 180+ five-star Google reviews
- A sealant colour to suit the surroundings
- Colour agreed with you before any work starts
How the visit works
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours to a few days, depending on the length of joint and the access. Somewhere like Brading needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Each joint is checked and the colour of the new sealant agreed.
- Failed sealant is removed back to clean, sound faces.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Keep pets and children clear of the area while we work
- Try not to wet indoor joints just before the visit
Getting a quote
If you are in Brading and need external mastic, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
Quotes for external mastic in Brading
Some jobs are bigger than they look, and some smaller. The main factors:
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- How many areas need sealing
- Any working-time requirements on site
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.
What we need to know
What to tell us when you ask for a quote:
- Any access issues, like height or stairs
- Whether it’s a home or a business
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or send us an email.
Surface by surface
Render joints
Render is weaker at the surface than brick, so a low-modulus sealant is kinder to the joint edges. Priming is done where the sealant calls for it.
Cladding and façade panels
Cladding and façade panels are usually separated by sealed joints. We reseal them with a sealant suited to the panel material.
For landlords and businesses
We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
We also work for property managers and facilities teams in Brading and across the Isle of Wight. Several sites can be quoted together, and we’re fully insured for the work.
What external mastic looks like in Brading
Brading is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. With historic houses such as Morton Manor (about 0.4 miles south) nearby, there’s older building stock in the area around Brading as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
In the older streets around St. Mary's Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep. Managing a site like Brading Church of England Controlled Primary School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Rented homes near Brading station change hands often, and outside joints that have cracked can let damp into a rental, so check them between lets.
Brading is about 3 miles south of Ryde, in the Isle of Wight. Wherever you are in the PO36 postcode area, our applicators can take on external mastic. Our area takes in 125 places across the Isle of Wight, large and small. There’s also a page for Portsmouth, roughly 9 miles from Brading.
All of PO36 is covered for external mastic, from the main roads to the quietest streets. Whether your property is on Station Road, High Street and Wrax Road or anywhere close by, we can help. Brading sits on or near the A3055, so getting to you is simple. Other places close to Brading include Yarbridge (1 mile south), Morton (1 mile south-west), Adgestone (1 mile south-west), Yaverland (1 mile south) and Gaskins (1 mile north-east). Further out, we also cover Newport (7 miles west), Ryde (3 miles north), Cowes (9 miles north-west), Shanklin (4 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Brading
Typical jobs here are in homes near The Bugle Inn and Sandown Bay Academy. There’s a railway station in Brading itself: Brading station. A little further out are Sandown Castle (1.5 miles south) and Brading Waxworks (within half a mile north). Not far away are Brading Marshes RSPB reserve and Brading Down.
Brading questions
Is Brading within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Does living near the coast affect external mastic in Brading?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We’ll give you the cure time for the product we used.
How much does external mastic cost in Brading?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
What do you need from me for a quote?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
Can new sealant go over the old?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you’ve already had a go yourself, that is fine. We cut it out and start again.