Perth and Kinross · Scotland
Gutter, fascia & soffit sealing in Old Blair, Perth and Kinross
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims in Old Blair, with a one-year guarantee on every job. Call for a quick quote.
- Drips from gutter joints and end caps
- Failed sealant on a garage door frame
- Old gutter sealant that has let go
Gutter sealing in Old Blair: local notes
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Harled (roughcast) walls are common in Scotland, and joints where harling meets other materials need a sealant that can grip and flex.
Rented homes near Blair Atholl station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH18 area, we cover gutter sealing for homes and businesses. Across Perth and Kinross, we cover 107 places, Old Blair among them. You can also see our page for Dundee, roughly 39 miles from Old Blair.
Postcode districts we cover here for gutter sealing: PH18. Other places close to Old Blair include Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.
Landmarks near Old Blair
The nearest railway station is Blair Atholl station, roughly 0.5 miles south-east. Other landmarks nearby include Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (less than half a mile north). Not far away are Loch Moraig and Creag Odhar.
About our gutter sealing in Old Blair
Water dripping from a gutter joint can stain walls and soak the ground below. Often a reseal is enough, as long as the gutter is sound. Common call-outs are for gaps along fascia and soffit joints and dripping gutter ends, on roofline trims, gutter joints and soffit joints.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard.
All our work is covered by our one-year guarantee.
- Location
- Old Blair (PH18)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Landlords, agents and businesses in Old Blair
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
For anyone letting property in or around Old Blair, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
How the visit works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself generally takes anything from an hour or two to a few hours, depending on the amount of work. Somewhere like Old Blair may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
How to prepare
- Clear items away from the joints we’re working on
- On commercial sites, let us know about site rules
- Mention if the joints have been sealed before
Get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Advice
Signs you need gutter sealing in Old Blair
When a gutter sags, its joints open. Resealing a sagging joint won’t last so the brackets need attention first.
Any of these means the joints need attention:
- Cracked sealant along roofline trims
- Garage door frames letting rain in
- Dripping gutter ends
- Open joints in fascias and soffits
Around Old Blair, as everywhere, gutter sealing is only as good as the preparation behind it.
Before you book anyone
- Which sealant they’ll use, and why
- What guarantee comes with the work
- What the cure time is
- How the surfaces are prepared before sealing
What the job involves on each surface
Gutter joints
When a joint drips, the gutter is often still sound. Resealing is usually enough.
uPVC fascias
Fascia board joints can open up. We seal them neatly with a matching sealant where possible.
How we quote for gutter sealing
Every job gets its own quote. These are the things that affect it:
- Working hours on commercial sites
- The old material and how stubborn it is
- The type of sealant required
- The size of the job
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.
Asking for a quote
What to tell us when you ask for a quote:
- Whether it’s a home or a business
- How we’d reach the joints
- A few photos by email, if you can
- Whether it has been sealed before
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Places near Old Blair
Also in Old Blair
Leave it or put it right?
Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it has failed, we’ll tell you. In an older home around Old Blair, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts, so you know where you stand.
What you get with us
- Quality sealants from Arbo and Everbuild
- Any old sealant cut out fully, not covered over
- Tidy, careful work
- Fully insured
Old Blair: your questions answered
Can you do gutter sealing in Old Blair?
Yes, Old Blair is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
I let a flat near Blair Atholl station. Can you help?
Yes. We work for landlords and agents as well as householders. You can drop us a line at info@mrmastic.co.uk with the details for a clear quote.
Is sealant enough for a gutter that has dropped?
Sealing a sagging joint will not last. A gutter installer needs to refix it, and we will tell you if that’s what we find.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. Then send an email to info@mrmastic.co.uk.
What does gutter sealing cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area.
How long does gutter sealing take?
Most jobs take anything from an hour or two to a few hours. We’ll confirm how long when we quote.
Will the old sealant be removed?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.