Perth and Kinross · Scotland
Regrouting in Old Blair
Specialist regrouting for Old Blair: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Splashback grout that has darkened
- Good tiles let down by tired grout
- Cracked or crumbling grout lines
How we quote for regrouting
Jobs vary more than people expect. The main factors:
- The number and length of the joints
- Whether there’s mould to deal with
- The product the joint needs
- How much old sealant there is and how hard it is to remove
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Asking for a quote
When you call or email, these details help:
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
- If someone has resealed it before
- The address or postcode of the job
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before we start.
Regrouting in Old Blair, done properly
Regrouting is generally paired with resealing. Grout belongs between tiles, but corners and edges move, so they need flexible silicone instead. Renewing both together means nothing is left half-done. We work on bathroom wall tiles, wet rooms and kitchen splashbacks, and the jobs we see most are cracked or crumbling grout lines and cracked grout along the bath or tray.
Bathrooms in smaller places like Old Blair work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Old Blair (PH18)
- Wider area
- Perth and Kinross
- Guarantee
- One year on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What happens if it’s left?
If tiles are loose, regrouting alone is not the answer. We will tell you before we start, so you can decide what to do. On sound tiles, regrouting avoids the upheaval of a retile. In a place like Old Blair, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.
Why choose Mr Mastic in Old Blair
- Anti-fungal sanitary silicone in wet areas
- Any old sealant cut out fully, not covered over
- Quality sealants from Arbo and Everbuild
- Domestic, commercial and hotel work
Read what affects the cost and customer reviews.
Do you need regrouting in Old Blair?
A bathroom that stays damp keeps the grout wet, giving mould a place to grow. Black marks that come back after cleaning are often in the grout itself.
People generally contact us when they notice something like this:
- Grout that is cracking and breaking up
- Dirty, worn grout on a tiled floor
- Grout washed out of a shower
- Grout in a colour the owner wants to change
For landlords with property near Blair Atholl station, a regrout while the flat is empty is quicker than working around a tenant.
What your quote should include
- What happens if the job turns out different
- Who does the work, and how experienced they are
- How long the guarantee is
- Whether they seal over old material or remove it
Old Blair: your questions answered
I let a flat near Blair Atholl station. Can you help?
Yes. We work for landlords and agents as well as homeowners. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.
Do you cover Old Blair for regrouting?
Yes, Old Blair is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.
What guarantee comes with the work?
Our one-year guarantee covers every job, including regrouting.
What information do you need?
A short description and the location, plus photos if you have them. We will ask anything else we need to know.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
How do I get a quote for regrouting in Old Blair?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Old Blair homes and their sealant
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Around Old Blair, as everywhere, regrouting is only as good as the preparation behind it.
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Homes, rented property, offices and hotels in Old Blair is covered for regrouting, old or new, large or small. Every job comes with our one-year guarantee. Old Blair is one of 107 towns and villages in Perth and Kinross where we work for regrouting. Our Dundee page covers work nearby (39 miles or so).
We work across PH18 for regrouting. We also cover the places around Old Blair: Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Around Old Blair
The closest station to Old Blair is Blair Atholl station, roughly 0.5 miles south-east. Other landmarks nearby include Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (under half a mile north). Not far away are Loch Moraig and Creag Odhar.
What happens on the day
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours, or longer for a fully tiled room. For a place like Old Blair, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Clear the area around the work
- Try not to wet indoor joints just before the visit
How to get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
Related advice
Places near Old Blair
Other services in Old Blair
Honest limits
Sealant is not the answer to every problem, and we will tell you before we start. It won’t solve:
- Tiles that are chipped or split
- Waterproofing that has failed below the tiling
- A floor or wall that keeps moving
If you are not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Bathroom floors
- Wet rooms
- Bathroom wall tiles
- Kitchen splashbacks
- Shower walls
- Tiled floors
DIY versus a professional finish
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Work for landlords, hotels and businesses
For anyone letting property in or around Old Blair, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.