Perth and Kinross · Scotland
Commercial & hotel sealant in Old Blair, Perth and Kinross
We cover Old Blair for sealant work for offices, hotels, washrooms and commercial buildings. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Sealant failing again soon after quick repairs
- Whole floors of tired en suites
- Joints that need doing before an inspection or audit
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
About our commercial sealant in Old Blair
For a rental portfolio, resealing between tenants keeps bathrooms and kitchens presentable. Several addresses can go on one quote to keep things simple. If you have large numbers of bathrooms needing the same work and tired sealant ahead of a health and safety audit, we can help.
For a place like Old Blair, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Old Blair (PH18)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What sealant work cannot fix
New sealant can’t fix everything, and we’d rather say so up front. Sealant won’t put right:
- A broken extractor fan behind the mould problem
- Faulty shower valves and leaking traps
- Water damage behind the tiles that needs a tiler or builder
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Where we work in Old Blair
- Rental portfolios
- Office washrooms & kitchens
- Hotel bathrooms
- Retail & leisure sites
- Student & care accommodation
- Welfare facilities
Common questions in Old Blair
Is Old Blair in your area for commercial sealant?
Yes. Our work covers the whole of Scotland, and Old Blair is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.
Can you help a landlord with a rental near Blair Atholl station?
Yes. We work for landlords and letting agents as well as homeowners. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.
Do the sealants smell?
There can be a smell while the sealant cures. Opening a window helps.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you’ll get one quote.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Where do you work from?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How soon can a room be used after resealing?
Normally after around 24 hours. We give a cure time for each area.
Commercial sealant in Old Blair: local notes
In Scotland, private landlords have to meet the Repairing Standard, and keeping sealant sound across a portfolio is part of that.
If you let a flat or house near Blair Atholl station, we can quote for one property or a whole portfolio of rentals.
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Every kind of property in Old Blair can book us for commercial sealant, old or new, large or small. Every job comes with our one-year guarantee. Our area takes in 107 places across Perth and Kinross, large and small. We also work in Dundee, around 39 miles away.
We work across the PH18 postcode area for commercial sealant. Other places close to Old Blair include Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). For island and remote addresses, a little more planning is needed.
Around Old Blair
The closest station to Old Blair is Blair Atholl station, about 0.5 miles south-east of the centre. Nearby you’ll also find Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (within half a mile north). Open spaces near Old Blair include Loch Moraig and Creag Odhar.
The process
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours per room, so whole buildings are phased, including the tidy-up. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- We start by looking at the rooms and agreeing what’s needed.
- Working hours are agreed, including early starts or out-of-hours work where it can be arranged.
- Areas are protected and the failed sealant removed.
- Joints are dried, then resealed and tooled neatly.
- Housekeeping or site staff are told when each area can be used.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
- Mention any sign-in or site rules at work premises
Ask for a quote
Need a quote? Please email us at info@mrmastic.co.uk and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Surface by surface
Hotel bathrooms
Guest bathrooms are resealed room by room or in batches, keeping most of the hotel open. Each room is handed back with its cure time for housekeeping.
Retail & leisure sites
Gym and leisure changing rooms take heavy use and plenty of water, so anti-fungal sanitary silicone is the product we use.
Quotes for commercial sealant in Old Blair
Call for a quick quote. The main things that affect it are:
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- How easy the joints are to reach
- The size of the job
What it costs depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before we start.
Helping us quote
You don’t need to know the technical terms. Just tell us:
- What’s wrong with the joints now
- Where the property is
- The rough size of the job
- Whether it has been sealed before
Every job is quoted individually, so the first step is telling us about yours. Simply email us at info@mrmastic.co.uk and describe the job, and pictures are welcome.
Keeping the joints in good condition
How long the joints last depends on use and care. Here’s what we suggest:
- Give housekeeping the cure time for every room
- Schedule work around occupancy
- Check extract fans are actually running
- Get split or lifting joints looked at early
We give a cure time for every area we finish, which is generally around 24 hours. Pass it on to housekeeping or cleaners so the new sealant is not wetted or scrubbed too soon.
In a commercial building, a leak can quickly spread beyond one room: into ceilings below, walls next door and service voids. Early resealing keeps it from getting that far.
When to call us in Old Blair
Shower trays and baths in busy buildings move more: different weights, constant use and daily cleaning all work at the joint. If a tray flexes, the sealant around it splits.
Look out for any of the following:
- Repeated reseals that do not last
- Shower leaks reaching the floor below
- Whole floors of tired en suites
- Failed joints in office kitchens and tea points
In and around Old Blair, as anywhere, good commercial sealant starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- When the joint can take water or movement
- What guarantee comes with the work
- Whether all the old sealant comes out first
- What insurance they hold