Perth and Kinross · Scotland

Window & door mastic in Old Blair, Perth and Kinross

Window mastic for Old Blair, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Whistling draughts around closed windows
  • Mastic that’s falling out in pieces
  • Cracked or shrunken mastic around the frame

Trusted window mastic in Old Blair

Window mastic in Old Blair, done properly

Around Old Blair we seal all kinds of frames: from uPVC casements to timber and aluminium, along with patio doors, French doors and sills. The sealant is chosen to suit the frame material and the wall. Common call-outs are for cracked sealant at the sill ends and rushed sealant from a window installation, on window sills, patio & French doors and timber windows & doors.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Exposed frames and sills take the full force of wind-driven rain, so the mastic there works hard.

Our work is backed for twelve months, in Old Blair and everywhere else we cover.

Where
Old Blair (PH18)
Region
Perth and Kinross
Guarantee
A year, on every job
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

Your questions about window mastic in Old Blair

Is Old Blair within the area you cover?

Yes. Old Blair is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Is Old Blair in your area for window mastic?

Yes. We work across all of Scotland, and Old Blair is part of that. You can email us at info@mrmastic.co.uk and let us know what needs doing.

Are you an approved applicator?

Yes. We are an ARBOMaster approved applicator.

Do you work on first-floor windows?

Yes, as long as they can be reached safely. Let us know about access when you ask for a quote so we can plan the job.

Is it messy?

No. We protect the surfaces around the joints, and we tidy up before we go.

Is the new sealant paintable?

Not usually, if it’s silicone. Tell us your decorating plans and we will pick a sealant to suit.

Is it worth trying it myself?

Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

How many windows can you do in a day?

That depends on the number of frames, how they’re reached and the state of the old mastic. We’ll tell you how long your job needs when we quote.

Why it’s worth doing now in Old Blair

Once mastic fails, rain can get between the frame and the wall. Left long enough, it can stain inside walls, spoil plaster and rot wooden frames. Resealing now is a small job by comparison. In an older home around Old Blair, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Why Old Blair customers choose us

  • Anti-fungal silicone where joints get wet
  • Tidy, careful work
  • Experience in homes, commercial sites and hotels
  • Rated 4.9 stars on Google

Take a look at what affects the cost or customer reviews.

The process

At the end, we look at the finished work together and explain the cure time. The visit itself generally takes a few hours for a few frames, or a day or more for a whole house, depending on the size of the job. For a place like Old Blair, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.

  1. We start by checking each window and door with you.
  2. Next the failed sealant is cut away and the joint cleaned.
  3. Where gaps are deep, backing rod goes in first.
  4. A flexible, weatherproof sealant is applied in a colour to suit the frame.
  5. Every joint is checked before we leave.

Preparing for the visit

  • Tell us about any water getting in
  • Mention any parking rules near the property
  • Mention any sign-in or site rules at work premises

Ask for a quote

There’s no standard price list. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.

Get a price

Read more

Do you need window mastic in Old Blair?

Plenty of failed mastic was poorly applied in the first place. Mastic laid onto dusty, damp or crumbling surfaces didn’t grip properly, so it comes away long before its time.

If you can see any of these, it’s time to have the joints looked at:

  • Untidy mastic left by window fitters
  • Mastic that is falling out in pieces
  • Cracked internal joints between frame and plaster
  • Damp patches on the reveal after heavy rain

If you let a flat or house near Blair Atholl station, renewing tired window mastic between tenants heads off draught and damp complaints.

Before you book anyone

  • Whether they’re fully insured
  • Whether VAT is included
  • How much experience the applicator has
  • Which sealant they’ll use, and why

How to choose a mastic man

How to look after the new joints

Simple care keeps the joints in good condition. We recommend:

  • Avoid harsh chemicals near the mastic
  • Keep jet washers away from the mastic
  • Keep paint off silicone joints
  • Wipe condensation off the frames

Timber frames need their paint kept up, because bare, wet timber moves more and pulls at the joint. Keep paint off the silicone itself.

Wet, windy weather is when failed mastic shows itself, but resealing works best in dry conditions. Dealing with it when you first notice a crack avoids chasing leaks through the wet months.

Should I try it myself first?

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

A DIY attempt doesn’t rule out a professional job. We cut it out and start again.

Window mastic in Old Blair: local notes

Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Sash and case windows are common in older Scottish homes, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.

Around Old Blair, as everywhere, window mastic is only as good as the preparation behind it.

Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. We carry out window mastic for householders, landlords and businesses in Old Blair and the surrounding area, as part of our work across Perth and Kinross. Old Blair is one of 107 towns and villages in Perth and Kinross we cover for window mastic. You can also see our page for Dundee, roughly 39 miles from Old Blair.

Work in PH18 is quoted and booked the same way as anywhere else. If you are just outside Old Blair, we cover Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). If you’re somewhere remote, the job takes a little more planning.

Near you in Old Blair

For rail, the closest station is Blair Atholl station, roughly 0.5 miles south-east. Well-known places in the area include Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (within half a mile north). Open spaces near Old Blair include Loch Moraig and Creag Odhar.

Map of Old Blair © OpenStreetMap contributors

Landlord and commercial work in Old Blair

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Surface by surface

uPVC windows

Plastic frames move a lot between a hot afternoon and a cold night, so the joint needs a low-modulus sealant that stays flexible. White is the usual colour, with brown, anthracite grey and black for coloured frames.

Composite doors

If the door itself is draughty, the issue may be the door seals or hinges rather than the frame mastic. We seal the frame and let you know about anything else.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job