North Lanarkshire · Scotland

Gutter Sealing in Airdrie

Problem with your gutter and fascia joints in Airdrie? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.

  • Water running down the wall below the gutter
  • Damp on an inside wall under a dripping gutter
  • Open joints in fascias and soffits

Gutter sealing for Airdrie homes and businesses

What we cannot put right

It helps to know what we cannot do:

  • Cracked, split or warped gutter sections
  • Sagging gutters or broken brackets
  • Rotten or damaged fascia boards

If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before you book.

Surfaces we seal

  • Soffit joints
  • Garage door frames
  • Gutter joints
  • uPVC fascias
  • Roofline trims
  • Gutter end caps

Gutter sealing in Airdrie

Failed sealant round a garage door frame lets rain blow in. We cut out the old sealant and reseal the frame with an exterior sealant. We are often asked to deal with dripping gutter ends and wet patches on the wall under a gutter joint, on garage door frames, roofline trims and gutter end caps.

In a town like Airdrie, plenty of homes have harled (roughcast) walls, and the joints where harling meets windows, doors and pipes need a sealant that grips and flexes. Gutters and fascias here take plenty of Scottish weather too.

We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.

Applicator reaching up to seal an external door frame on a sunny day
Location
Airdrie (ML6)
Region
North Lanarkshire
Cover
One year on every job
Quote
A clear price before we start
Email
info@mrmastic.co.uk
Page updated
26 October 2026

Airdrie: your questions answered

Is Airdrie in your area for gutter sealing?

Yes. Our work covers the whole of Scotland, and Airdrie is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.

Is there a guarantee on gutter sealing in Airdrie?

Every job comes with our 12-month guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.

Are you ARBOMaster approved?

Yes. We are approved under the ARBOMaster scheme.

Can new sealant go over the old?

No, it will not last. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.

Do you take out the old sealant first?

Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.

Do I have to be there?

If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.

Do the sealants smell?

That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.

How much does gutter sealing cost in Airdrie?

We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.

Keeping the joints in good condition

A little care helps the new joints last. We recommend:

  • Check that water runs out of the downpipes
  • Keep an eye out for wet patches below a joint
  • Glance at the soffit joints now and then
  • Keep ladders off the guttering

Give the sealant the cure time we tell you before poking or cleaning near it.

Rain getting in round a garage door frame can damage what’s stored inside. Resealing the frame is a quick job while the frame is sound.

Gutter sealing in Airdrie: local notes

Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.

Rented homes near Airdrie station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls. Schools such as Airdrie Academy are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. For an older house near a landmark such as Baptist Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.

Airdrie is about 11 miles north-east of East Kilbride, in North Lanarkshire. Whether you’re in the middle of Airdrie or further out, gutter sealing is available for homes and businesses alike. Airdrie is one of 89 places in North Lanarkshire where we work for gutter sealing. There’s also a page for Glasgow, roughly 12 miles from Airdrie.

Our applicators cover all of the ML6 postcode area for gutter sealing. Local streets include East High Street, High Street and Garden Square Walk, all of which we cover. Main roads around Airdrie include the A73 and A89, so getting to you is simple. We also cover the places around Airdrie: Burnfoot (1 mile north-west), Gartness (1 mile south-east), Airdriehill (1 mile north-east), Glenmavis (2 miles north-west) and Moffat Mills (2 miles east). Within a short drive, we also cover Motherwell (5 miles south), Cumbernauld (6 miles north), Wishaw (7 miles south), Bellshill (4 miles south-west), Kilsyth (8 miles north-west) and Shotts (8 miles south-east). Airdrie is one of the larger places we cover in North Lanarkshire.

Around Airdrie

Typical jobs here are in homes near The Robert Hamilton pub and the streets around them. Airdrie has its own railway station: Airdrie station. A little further out are Airdrie Museum (within half a mile west) and Monklands Hospital (0.9 miles west).

Map of Airdrie © OpenStreetMap contributors

What the job involves on each surface

Gutter joints

Joints between gutter lengths are the most common leak point. We clean, dry and reseal them.

uPVC fascias

Joints between fascia boards can open over time. They’re sealed tidily with a matching sealant where possible.

Landlords, agents and businesses in Airdrie

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.

Should I try it myself first?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

How we quote for gutter sealing

Your quote is based on your job. We take into account:

  • The size of the job
  • How easy the joints are to reach
  • The product the joint needs
  • Whether there’s mould to deal with

Leaving a failed joint usually makes the job bigger, not smaller. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.

Asking for a quote

To help us quote quickly, let us know:

  • Pictures of the joints, sent by email
  • The type of property
  • Whether it has been sealed before
  • Access, such as stairs, a lift or height

We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details, and pictures are welcome.

What we do, step by step

Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes anything from an hour or two to a few hours. In a Scottish town like Airdrie, parking is usually straightforward, though older centres can be tighter. If you are in a flat with a shared stair or a door entry system, let us know when you book.

  1. First we agree which joints need sealing.
  2. Each joint is cleaned and any old sealant removed.
  3. We make sure everything is dry.
  4. We apply exterior or gutter sealant and finish it neatly.
  5. We check our work before we leave.

How to prepare

  • Move anything stored near the joints
  • Mention if the joints have been sealed before
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, email us at info@mrmastic.co.uk.

Get a price

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job