North Lanarkshire · Scotland
Fire Rated Sealant in Shotts
Specialist fire rated sealant for Shotts: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Gaps left after a refit or conversion
- Door frames with gaps between frame and wall
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant in Shotts, done properly
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We’re often asked to deal with old fire sealant that has split or come away and linear gaps at the head of walls, across flats & HMOs, plasterboard & masonry and service penetrations.
Work in a place like Shotts is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
There’s a 12-month guarantee on every job.
- Where
- Shotts (ML7)
- Region
- North Lanarkshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Leave it or put it right?
Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job that does not depend on other work. Around Shotts, water from a failed joint in an older stone home can soak into timber and plaster.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts.
Why choose Mr Mastic in Shotts
- Full insurance on every job
- 4.9 on Google from 180+ five-star reviews
- Over 20 years’ experience
- Domestic, commercial and hotel work
Take a look at how sealant jobs are priced and customer reviews.
When it isn’t the sealant
It helps to know what we can’t do too:
- Assessing a building’s fire safety
- Openings too large for sealant, which need batts, boards or another system
- Problems with the door itself rather than the gap around the frame
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before booking.
Joints and surfaces we work on
- Linear gaps
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
- Door frames
- Plasterboard & masonry
Common questions in Shotts
Can you help a landlord with a rental near Shotts station?
Yes, landlords and agents are among the people we work for. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
Will you come out to Shotts?
Yes, we do. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How long does fire rated sealant take?
It depends on the size of the job, but as a guide it takes anything from a few hours to several days, depending on how many gaps there are. We will give you a better idea when we quote.
Do you guarantee your work?
Yes. Every job comes with a one-year guarantee.
Do you do fire sealant around door frames?
Yes. We often seal open gaps hidden behind the architrave. The door and its fittings are a separate job for a door specialist.
What’s the difference between intumescent and fire-rated sealant?
Intumescent describes a material that swells in heat. Many fire-rated sealants work this way, but not all, and the choice depends on the gap.
Can I add another job to the visit?
Of course. Doing several areas at once is generally more efficient.
Do you remove the old sealant?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Also in Shotts
What fire rated sealant looks like in Shotts
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
Rented homes near Shotts station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Around Shotts, as everywhere, fire rated sealant is only as good as the preparation behind it.
Shotts is about 6 miles north-east of Wishaw, in North Lanarkshire. We provide fire rated sealant to householders, landlords and businesses in Shotts, as part of our work across North Lanarkshire. Our area takes in 89 places across North Lanarkshire, from the larger towns to small villages. There’s also a page for Glasgow, roughly 19 miles from Shotts.
Our applicators cover all of the ML7 postcode area for fire rated sealant. We cover properties on Station Road, Main Street and Regal Grove and the roads around them. Neighbouring places we cover for fire rated sealant include Burnbrae (1 mile south), Torbothie (1 mile east), Springhill (1 mile south-east), Eastfield (3 miles north-east) and Harthill (3 miles north-east). We also work in nearby towns such as Motherwell (7 miles west), Cumbernauld (12 miles north-west), Coatbridge (9 miles west), Airdrie (8 miles north-west), Wishaw (6 miles south-west) and Bellshill (9 miles west). Being one of North Lanarkshire’s larger places, Shotts has every kind of property, from flats to offices.
Around Shotts
Shotts has its own railway station: Shotts station. Nearby you’ll also find Murdostoun Castle (3.5 miles south-west) and Shotts Heritage Centre (within half a mile east). Green spaces nearby include Allanton House lake.
How the job changes by surface
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. Each one is sealed to the product’s tested detail and we flag any that need another system.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Never patch a fire seal with standard sealant
- Ask which product was used before you paint
- Include hidden areas like risers in routine checks
- Allow for resealing whenever new services are run
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record.
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We take into account:
- Any working-time requirements on site
- How easy the joints are to reach
- The product the joint needs
- How many rooms, windows or areas are involved
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. We will give you a clear price for the lot.
What we need to know
To help us quote quickly, let us know:
- Any previous sealing or DIY work
- Where the property is
- How many joints, rooms or windows are involved
- If it’s domestic, commercial or a hotel
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work.
Landlords, agents and businesses in Shotts
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
How the visit works
The work is kept neat and contained to the area we are working on, so you can carry on as normal. The job generally takes from a few hours to a few days, depending on the number of gaps and the access, and we tell you how long to leave it before we go. Somewhere like Shotts may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your records.
Getting ready for the visit
- Move anything stored near the joints
- Mention any parking rules near the property
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
Getting a quote is simple: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we’ll take it from there.