North Lanarkshire · Scotland
Fire-rated sealant in Airdrie, North Lanarkshire
Fire-stopping gaps in Airdrie need attention? We remove the old material, prepare the joints and seal them properly.
- Joints picked up in a fire-stopping survey
- Linear gaps at the head of walls
- Standard silicone or caulk in a fire-stopping gap
Fire rated sealant in Airdrie
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. We seal them with a product tested for that kind of gap. Typical jobs include ordinary sealant used where a fire-rated product was needed and new service routes left unsealed after building work, across service penetrations, linear gaps and plasterboard & masonry.
For a hotel, guest house or care home in Airdrie, room-by-room resealing can be planned around guests or residents, and out-of-hours working is possible to arrange.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Place
- Airdrie (ML6)
- Wider area
- North Lanarkshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Why act early in Airdrie
Squirting in whichever sealant is nearest does not make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. In flats with a shared stair in Airdrie, a leak from a failed seal can affect the flat below too, and that’s much harder to put right.
Leaving a failed joint normally makes the job bigger, not smaller. If you are unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Why book with us
- Neat joints and a tidy finish
- Over 20 years’ experience
- Rated 4.9 stars on Google
- Approved under the ARBOMaster scheme
Fire rated sealant around Airdrie
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
For site and facilities teams at buildings such as Airdrie Academy, fire-stopping around service openings should be restored whenever new services go in. If you look after a church, hall or community building such as Baptist Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Airdrie is about 11 miles north-east of East Kilbride, in North Lanarkshire. Airdrie gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Our area takes in 89 places across North Lanarkshire, large and small. We also work in Glasgow, around 12 miles away.
All of ML6 is within our area for fire rated sealant. Local streets include East High Street, High Street and Garden Square Walk, and we cover them all. You’ll find Airdrie on the A73 and A89, so it’s easy for us to get to with everything needed for fire rated sealant. Neighbouring places we cover for fire rated sealant include Burnfoot (1 mile north-west), Gartness (1 mile south-east), Airdriehill (1 mile north-east), Glenmavis (2 miles north-west) and Moffat Mills (2 miles east). We also work in nearby towns such as Motherwell (5 miles south), Cumbernauld (6 miles north), Wishaw (7 miles south), Bellshill (4 miles south-west), Kilsyth (8 miles north-west) and Shotts (8 miles south-east). As one of the bigger places in North Lanarkshire, Airdrie has homes, rented property and businesses of every kind.
Near you in Airdrie
Typical jobs here are in homes near The Robert Hamilton pub. Airdrie has its own railway station: Airdrie station. A little further out are Airdrie Museum (under half a mile west) and Monklands Hospital (0.9 miles west).
Surface by surface
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and record where they are.
Masonry and concrete
Holes through concrete and block are rarely neat. We check the gap size around the service against the product’s tested range.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Common questions in Airdrie
Is Airdrie in your area for fire rated sealant?
Yes. Our work covers the whole of Scotland, and Airdrie is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.
I let a flat near Airdrie station. Can you help?
Yes, rental work is part of what we do. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Do you guarantee your work?
Yes. Every job comes with a one-year guarantee.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Airdrie.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We’ll tell you what we’re using and why.
Do you take on fire stopping in schools and offices?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Let us know the building’s hours and we will plan the work to suit.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
The process
We keep the work tidy and contained to the joints we are treating, so you can get on with your day. The job generally takes a few hours for a handful of gaps, and longer for a whole building, and we tell you how long to leave it before we go. Parking around Airdrie is rarely difficult, though older streets in the centre can be tight. For flats, mention the shared stair or door entry system.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Preparing for the visit
- Tell us if parking is tricky
- For business premises, tell us about site rules or sign-in
- Tell us about any previous sealing or DIY attempts
How to get a quote
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Related advice
Places near Airdrie
What else we do in Airdrie
Landlords, agents and businesses in Airdrie
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
For anyone letting property in or around Airdrie, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
What we’re called out for in Airdrie
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
It’s worth asking for a quote if you see:
- Gaps flagged on a fire risk assessment
- Open gaps behind door architraves
- Gaps filled with a product that isn’t fire-rated
- Cracked or shrunken fire-rated sealant
Rented homes near Airdrie station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What your quote should include
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- How long the guarantee is
- Is the old sealant removed completely?
How to look after the new joints
So the new joints stay in good condition:
- Keep the record of products and locations with your fire safety documents
- Tell trades working in the building that fire seals must be put back
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Plan fire stopping into any work that goes through walls or floors
Avoid covering a sealed gap with anything that is not part of the tested detail. If it needs repair, use the same type of product. We can tell you which product we used.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Have it sealed, then keep the record so you can show it was dealt with.