Highland · Scotland
Fire Rated Sealant in Portmahomack
Fire-stopping gaps in Portmahomack need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Gaps left after a refit or conversion
- Standard silicone or caulk in a fire-stopping gap
- Old fire sealant that has split or come away
Fire rated sealant in Portmahomack, done properly
We often work from an action list drawn up by a fire risk assessor on buildings across Portmahomack. Send us the list or the survey and we will quote for the fire-rated sealant work on it. If you have joints picked up in a fire-stopping survey and open holes round services passing through fire walls, we can help.
For a place like Portmahomack, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Where
- Portmahomack (IV20)
- Wider area
- Highland
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Questions from Portmahomack
Do you cover smaller places like Portmahomack?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Can you tell me which gaps need fire stopping?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. Then email us at info@mrmastic.co.uk.
Do you certify the fire stopping?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer; we install to those details and record what we did.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
How much does fire rated sealant cost in Portmahomack?
It depends on the job, so we quote each one individually. To get one, drop us a line at info@mrmastic.co.uk with a short description of the job.
What happens on the day
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the job takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Somewhere like Portmahomack may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Clear the area around the work
- Keep pets and children clear of the area while we work
Get a quote
Getting a quote is simple: tell us what needs doing and where. Photos by email help us understand the job, and we’ll come back to you with a quote.
Advice
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What we’re called out for in Portmahomack
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
The most common problems we see are:
- Unsealed gaps where pipes and cables go through a wall
- Sealant items on a fire risk assessment action list
- Seals cut through by electricians, plumbers or data installers
- Fire seals that have cracked with movement
Whether the job is in Portmahomack itself or nearby, the right material for each joint matters as much as a neat finish.
Questions to ask before booking
- The length of the guarantee
- Whether VAT is included
- Which colour the sealant will be
- Who turns up on the day
Fire rated sealant around Portmahomack
If you run a hotel, guest house or holiday let in a coastal place like Portmahomack, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
In and around Portmahomack, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Portmahomack is about 18 miles north of Nairn, in Highland. Every kind of property in Portmahomack is covered for fire rated sealant. Every job comes with our one-year guarantee. Our area takes in 253 places across Highland, from the larger towns to small villages. Aberdeen is on our list too, around 79 miles away.
Every address in IV20 is covered for fire rated sealant. We cover properties on Main Street, Bank Street and Well Street. Other places close to Portmahomack include Inver (4 miles west), Hilton of Cadboll (6 miles south-west), Loans of Tullich (6 miles south-west), Balintore (6 miles south-west) and Fearn (7 miles south-west). We also work in nearby towns such as Tain (9 miles west), Dornoch (8 miles west), Golspie (11 miles north-west), Brora (12 miles north) and Cromarty (13 miles south-west). If you are somewhere remote, a little more planning is needed.
Near you in Portmahomack
In Portmahomack, that means homes and buildings near Terrace in Portmahomack and the streets around them. A little further out are Ballone Castle (0.9 miles south-east).
What we can’t put right
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Assessing a building’s fire safety
- Walls or floors that weren’t built to resist fire
- Doors that are not fire doors in the first place
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before booking.
Where we work in Portmahomack
- Service penetrations
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
Places near Portmahomack
More services for Portmahomack
What affects the cost of fire rated sealant
Call for a quick quote. What matters most is:
- Access and height
- The product the joint needs
- The old material and how stubborn it is
- The number and length of the joints
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
What to tell us when you ask for a quote:
- Where the job is, and your postcode
- The problem you’ve noticed
- Pictures of the joints, sent by email
- How many joints, rooms or windows are involved
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, email us at info@mrmastic.co.uk.
Why deal with it now?
For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We’ll say so if a gap needs something other than sealant. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Why Portmahomack customers choose us
- Anti-fungal sanitary silicone in wet areas
- Experience in homes, commercial sites and hotels
- Neat joints and a tidy finish
- 4.9 on Google from 180+ five-star reviews
Surface by surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.