Surrey · England
Fire Rated Sealant in Molesey
Fire rated sealant for Molesey and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Old fire sealant that has split or come away
- Open gaps behind door architraves
- Ordinary sealant used where a fire-rated product was needed
About our fire rated sealant in Molesey
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. If you’re dealing with open joints along the top of partitions and unsealed gaps around fire door frames, we can put it right.
Commercial work around a smaller place like Molesey normally means a pub, a shop, a school or small business units rather than office blocks. Each needs the same care with its sealant as any larger building.
Big or small, you get the same 12-month guarantee in Molesey and across Surrey.
- Place
- Molesey (KT8, KT7, KT10)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Photograph sealed gaps before they’re covered up
- Ask which product was used before you paint
- Never patch a fire seal with standard sealant
- Plan fire stopping into any work that goes through walls or floors
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
A flagged gap shouldn’t wait for the next assessment. Get it sealed and recorded so you can show it was dealt with.
Quotes for fire rated sealant in Molesey
For a quick quote, just ask. What matters most is:
- How many areas need sealing
- Whether the work is at height
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or send us an email and we will talk you through it.
What we need to know
When you contact us, these details help:
- Whether it’s a home or a business
- What’s wrong with the joints now
- Any previous sealing or DIY work
- Access, such as stairs, a lift or height
Every job is quoted individually. Simply ring 0345 464 0079 or send us an email and describe the job.
Why act early in Molesey
For some gaps, sealant isn’t the right answer and another system is needed. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we will tell you. Homes in smaller places like Molesey can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email for an honest opinion and a quote.
What you get with us
- Over 20 years’ experience
- Anti-fungal silicone where joints get wet
- Neat joints and a tidy finish
- Arbo and Everbuild products
See our cost guide and what customers say.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
What the job involves on each surface
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run leaving no stretch unsealed.
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself usually takes anything from a few hours to several days, depending on how many gaps there are, depending on the size of the job. In a smaller place like Molesey, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
How to prepare
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
Get a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved and give you a clear quote.
Advice
What we’re called out for in Molesey
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
Keep an eye out for any of the following:
- Gaps left after a refit or conversion
- Sealant items on a fire risk assessment action list
- Linear gaps at the head of walls
- Fire stopping disturbed by later work
If you look after a building such as The Orchard Infant School, fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- Whether all the old sealant comes out first
- Whether they’re fully insured
- How much experience the applicator has
- What happens if the job turns out different
Also near Molesey
Also in Molesey
Molesey: your questions answered
Do you take on hotel work around Molesey?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is Molesey within the area you cover?
Yes. Molesey is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Can you tell me how many minutes the seal will last?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
What’s the difference between intumescent and fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent ones swell in heat, and they’re one option among several. We use whichever the specification and tested details call for.
How long will you be here?
Typically it takes anything from a few hours to several days, depending on how many gaps there are. Larger jobs naturally take longer, and we will say how long yours will take.
Is standard sealant good enough for a fire gap?
No. It looks sealed but will not perform as fire stopping. Use a product tested for that gap and service.
What do you need from me for a quote?
The location, the problem and the rough size of the job. If you can, email a few pictures.
Fire rated sealant in Molesey: local notes
Molesey has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of St Mary, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Hampton Court station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Molesey is about 6 miles west of Wimbledon, in Surrey. Jobs in Molesey get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. 395 places in Surrey are on our list, large and small. There’s also a page for London, roughly 13 miles from Molesey.
We cover every part of the KT8, KT7 and KT10 postcode area for fire rated sealant and the streets around it. Local streets include Bell Road, Park Road and Kent Road, and we cover them all. With the A309 close by, Molesey is easy for our applicators to reach for fire rated sealant. Nearby, we also carry out fire rated sealant in Weston Green (1 mile south-east), Thames Ditton (1 mile south-east), Lower Green (1 mile south-west), Hinchley Wood (1 mile south-east) and Long Ditton (2 miles east). Within a short drive, we also cover Guildford (14 miles south-west), Woking (11 miles south-west), Epsom (5 miles south-east), Redhill (13 miles south-east), Ewell (5 miles south-east) and Egham (9 miles west).
What’s near Molesey
Typical jobs here are in homes near The Albion pub, Cigarette Island Park and Esher College and the streets around them. The nearest railway station is Hampton Court station, roughly 0.7 miles north-east. Well-known places in the area include Teddington Memorial Hospital (2.2 miles north) and Bentall Centre (2.4 miles north-east). Not far away are The Lake and The Wood.