Surrey · England
Redhill Fire Rated Sealant
Our applicators work in Redhill on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Gaps around pipes and cables through fire-resisting walls
- Damaged fire sealant left by other trades
- Open joints along the top of partitions
What fire rated sealant looks like in Redhill
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as St Joseph's Catholic Primary School, service openings in fire-resisting walls need checking after any refurbishment. Rented homes near Redhill station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as Saint Matthew's Church, service openings in its walls need the right fire-rated sealant, as in any building.
Redhill is about 9 miles north of Crawley, in Surrey. Whether you are in the middle of Redhill or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Redhill is one of 395 places in Surrey where we work for fire rated sealant. For nearby work, see our Crawley page (9 miles or so).
Jobs for fire rated sealant in RH1 and RH2 is quoted and booked the same way as anywhere else. Streets in the area include High Street, Station Road and Church Road, all of which we cover. Being close to the A23 and A25, Redhill is easy for our applicators to reach for fire rated sealant. We also cover Earlswood (1 mile south), Holmethorpe (1 mile north-east), Meadvale (1 mile south-west), South Earlswood (2 miles south) and South Nutfield (2 miles south-east). Larger places within reach include Epsom (8 miles north-west), Horley (4 miles south), Ewell (9 miles north-west), Walton-on-Thames (14 miles north-west), Caterham (5 miles north-east) and Dorking (7 miles west). Redhill is one of the larger places we cover in Surrey.
Near you in Redhill
Typical jobs here are in homes near The Carrington School, Nutfield Marshes and Dunottar School. There’s a railway station in Redhill itself: Redhill station. Other landmarks nearby include The Belfry (within half a mile north) and Surrey Fire Museum (1.2 miles west). The countryside around Redhill includes Colley Hill and Reigate Heath.
Fire rated sealant in Redhill
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over, one gap at a time. If you’re dealing with ordinary sealant used where a fire-rated product was needed and gaps around pipes and cables through fire-resisting walls, we can help, whatever the surface.
Shared washrooms take far more use than a home bathroom, and their sealant shows it, and fire-rated joints need restoring whenever new services are run through a wall. For a building in Redhill, we plan timings around how it’s used.
All of our work is guaranteed for twelve months, in Redhill and everywhere else we cover.
- Location
- Redhill (RH1, RH2)
- Region
- Surrey
- Cover
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Aftercare tips
Good habits help new joints last longer. Our tips:
- Include hidden areas like risers in routine checks
- Photograph sealed gaps before they’re covered up
- Flag any open gap you spot round a pipe or cable
- Keep the record of products and locations with your fire safety documents
File the record of locations and products with your fire safety paperwork. It helps whoever checks the building next.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record so you can show it was dealt with.
Other services in Redhill
Why act early in Redhill
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing once someone inspects it. In Redhill, as anywhere, most leaks start as a small gap in a joint, and early is when they’re cheapest and quickest to sort.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Why us?
- Over 20 years’ experience
- 180+ five-star Google reviews
- Neat joints and a tidy finish
- Anti-fungal silicone where joints get wet
Take a look at our cost guide and what customers say.
What the job involves on each surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service against the product’s tested range.
Redhill: your questions answered
Do you work for landlords with property near Redhill station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Can you do fire rated sealant in Redhill?
Yes. We work across London and the South East, and Redhill is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Will we have a record of what was sealed?
Yes. We record the locations we have sealed and the products used for your files.
How long does fire rated sealant take?
Typically it takes a few hours for a handful of gaps, and longer for a whole building. Bigger jobs take longer, and we will tell you how long to expect.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
What fire rating will the seal have?
That isn’t something we state or certify. The requirement comes from your assessor, designer or building control, and we fit a product whose tested details meet it, recording the locations and products.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
Do you carry out fire risk assessments?
No, we do not assess buildings. When your assessor or designer has set out what’s needed, we can quote for the fire-rated sealant items.
Quotes for fire rated sealant in Redhill
Every job gets its own quote. This is what makes a difference:
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- When we can work, for business premises
- Whether there’s mould to deal with
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Any previous sealing or DIY work
- Roughly how big the job is
- Any access issues, like height or stairs
- Whether it’s a home or a business
Getting a quote is simple: let us know the job and the location. A few pictures by email make the job easier to understand.
How it works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on the amount of work. A visit in Redhill needs access to the work and a place to park close by. If the job is outside, mention gates, side access and anything above ground floor.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your files.
How to prepare
- Let us know about earlier repairs to the joints
- Mention any parking rules near the property
- Keep children and pets away from the work area
Getting a quote
For a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. We will send you a clear quote before any work starts.
Related advice
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Large holes that need a different fire-stopping system
- Fire doors that need new seals, closers or hardware
- Deciding what fire stopping a building needs
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
What we seal
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Plasterboard & masonry
- Door frames