Highland · Scotland
Fire-rated sealant in Merkinch, Highland
Fire rated sealant for Merkinch, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Door frames with gaps between frame and wall
- Unsealed gaps where pipes and cables go through a wall
- Old fire sealant that has split or come away
For landlords and businesses
Letting agents and landlords in Merkinch can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
If you manage several properties in or around Merkinch, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
Fire rated sealant in Merkinch
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it, so we follow the tested detail for each one. We work on pipe & cable gaps, linear gaps and door frames, and the jobs we see most are gaps around pipes and cables through fire-resisting walls and gaps filled with a product that isn’t fire-rated.
For holiday lets, guest houses and community buildings in or near Merkinch, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is covered for a year after we finish. If anything is not right with it, drop us a line at info@mrmastic.co.uk.
- Where
- Merkinch (IV3, IV1, IV2)
- Region
- Highland
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Surface by surface
Masonry and concrete
Masonry is dusty and porous, so preparation matters. We brush and vacuum the gap and use backing where the detail needs it before the sealant goes in.
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. The sealant has to be one tested in plasterboard.
Workplaces and buildings in Merkinch
If you run a hotel, guest house or holiday let in a coastal place like Merkinch, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Merkinch has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.
If you look after a church, hall or community building such as St Michael & All Angels, older buildings that have had new heating or wiring often have service gaps worth checking. For landlords with property near Inverness station, any gap left by new services in shared walls should be closed with a fire-rated product.
Merkinch is about 1 mile north-west of Inverness, in Highland. Across the IV3 area, we can carry out fire rated sealant at your property. Across Highland, we cover 253 places, Merkinch among them.
Every address in IV3, IV1 and IV2 is covered for fire rated sealant. If you need fire rated sealant at a property on Swan Lane, Shoe Lane and Canal Road or anywhere close by, our applicators can take on the job. Merkinch sits on or near the A862, which makes travel easy. Close by, we work in Longman (1 mile east), Inverness (1 mile south-east), Ballifeary (1 mile south), Millburn (1 mile east) and Crown (1 mile south-east). Larger places within reach include Nairn (15 miles north-east), Cradlehall (4 miles east), Dingwall (11 miles north-west), Alness (15 miles north), Invergordon (15 miles north) and Muir of Ord (8 miles west). Merkinch is one of the larger places we cover in Highland. For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
Around Merkinch
Around Merkinch, our work takes us to homes and buildings near 1 Grant Street pub and Cavell Gardens, among other places. The nearest railway station is Inverness station, roughly 0.8 miles east. A little further out are Inverness Castle (0.9 miles south-east) and Royal Northern Infirmary (1 mile south-east). Not far away are Tomnahurich.
How it works
The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. Expect the work to take anything from a few hours to several days, depending on how many gaps there are, and we explain the cure time before we leave. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Mention any leaks or damp you’ve noticed
- Keep children and pets away from the work area
Ask for a quote
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Related advice
Also in Merkinch
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Include hidden areas like risers in routine checks
- Take photos of fire stopping before ceilings or boxing go back
- Plan fire stopping into any work that goes through walls or floors
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record so the item can be closed.
When to call us in Merkinch
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
Look out for any of the following:
- Ordinary sealant used where a fire-rated product was needed
- Open joints along the top of partitions
- Gaps left after a refit or conversion
- Fire stopping disturbed by later work
For site and facilities teams at buildings such as Inverness High School, gaps opened by contractors for new cabling are a common finding in schools and offices.
What to look for in a quote
- How the colour is chosen
- The length of the guarantee
- How hidden problems are handled
- Is VAT in the price?
Questions from Merkinch
Do Scottish building rules affect fire-rated sealant work in Merkinch?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work for landlords with property near Inverness station?
Yes, we work for letting agents and landlords. Just email us at info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants aren’t made or tested to stop fire. We cut it out and reseal with a fire-rated product.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Do you work in Merkinch?
We do. Our applicators work in Merkinch, and the service is the same as everywhere else.
Can you work in occupied buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use. Out-of-hours work can be arranged where it’s needed.
What information do you need?
Only a few details: where it is, what you’ve noticed and how we reach it. Then email us at info@mrmastic.co.uk.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
Quotes for fire rated sealant in Merkinch
We don’t publish a price list. The quote depends on:
- How easy the joints are to reach
- The old material and how stubborn it is
- Any mould that needs treating
- Which sealant suits the joint
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference.
What we need to know
To make quoting easier, let us know:
- Pictures of the joints, sent by email
- How we’d reach the joints
- Where the job is, and your postcode
- Roughly how big the job is
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.