Aberdeenshire · Scotland
Laurencekirk Fire Rated Sealant
Problem with your fire-stopping gaps in Laurencekirk? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Ordinary sealant used where a fire-rated product was needed
- Cracked or shrunken fire-rated sealant
- New service routes left unsealed after building work
Fire rated sealant for homes and businesses in Laurencekirk
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment for buildings in Laurencekirk. If you share the list, we can quote for the gaps that need fire-rated sealant. If you’re dealing with ordinary sealant used where a fire-rated product was needed and gaps around pipes and cables through fire-resisting walls, we can help, on flats & HMOs, door frames and pipe & cable gaps alike.
If you look after holiday lets, a guest house or a community building in or near Laurencekirk, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
We stand behind the work with a one-year guarantee.
- Where
- Laurencekirk (AB30)
- Wider area
- Aberdeenshire
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Get damaged fire seals looked at promptly
- Check risers, ceiling voids and cupboards during building checks
- Store the list of sealed gaps with your building paperwork
- Photograph sealed gaps before they’re covered up
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.
What affects the cost of fire rated sealant
We quote each job individually. This is what makes a difference:
- Whether the work is at height
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
- The amount of work
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- What the problem is, such as mould, gaps, leaks or cracking
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
- How many joints, rooms or windows are involved
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Your questions about fire rated sealant in Laurencekirk
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Do you cover smaller places like Laurencekirk?
Yes. Laurencekirk is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What’s the difference between intumescent and fire-rated sealant?
An intumescent sealant expands when it gets hot, helping close the gap. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in.
How much does fire rated sealant cost in Laurencekirk?
Every job is different, so each one gets its own quote. For a quick quote, send an email to info@mrmastic.co.uk with a short description of the job.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is usually more efficient.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
What we do, step by step
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours for a handful of gaps, and longer for a whole building. Around Laurencekirk, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
Getting a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
Read more
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Flats and HMOs
Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance to keep disruption down.
Common problems we fix in Laurencekirk
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
People usually contact us when they notice one of these:
- Seals cut through by electricians, plumbers or data installers
- New service routes left unsealed after building work
- Unsealed gaps where pipes and cables go through a wall
- Ordinary sealant used where a fire-rated product was needed
If you look after a church, hall or community building such as Laurencekirk, gaps around pipes and cables are worth checking after any building work there.
Before you book anyone
- Whether you can choose the colour
- How the surfaces are prepared before sealing
- What product goes in the joint
- What insurance they hold
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.
Towns and villages near Laurencekirk
What else we do in Laurencekirk
What sealant work cannot fix
We will not take on work that won’t last, so these are the limits:
- Construction that does not provide fire resistance on its own
- Fire risk assessments, which need a qualified assessor
- Big openings where sealant alone isn’t the tested solution
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before booking.
Where we work in Laurencekirk
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
- Service penetrations
- Flats & HMOs
- Linear gaps
Commercial buildings in Laurencekirk
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
For site and facilities teams at buildings such as Mearns Academy, gaps opened by contractors for new cabling are a common finding in schools and offices. For landlords with property near Laurencekirk station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Laurencekirk is about 8 miles north of Montrose, in Aberdeenshire. Laurencekirk gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 161 places across Aberdeenshire, large and small. There’s also a page for Aberdeen, roughly 26 miles from Laurencekirk.
All of AB30 is within our area for fire rated sealant, from the main roads to the quietest streets. Fire rated sealant is available to properties on High Street, Market Road and Kinnear Square and the roads around them. Laurencekirk is on the A937 and B9120, which makes it straightforward to reach. Neighbouring places we cover for fire rated sealant include Sauchieburn (3 miles west), Fordoun (4 miles north-east), Luthermuir (4 miles south-west), Marykirk (4 miles south-west) and Fettercairn (4 miles west). Within a short drive, we also cover Montrose (8 miles south), Stonehaven (13 miles north-east), Inverbervie (7 miles east), St Cyrus (5 miles south-east), Hillside (6 miles south) and Ferryden (9 miles south).
Local landmarks in Laurencekirk
There’s a railway station in Laurencekirk itself: Laurencekirk station. Well-known places in the area include Thornton Castle (1.7 miles west). Open spaces near Laurencekirk include Strathfinella Hill.