Aberdeenshire · Scotland
Fordoun Fire Rated Sealant
Problem with your fire-stopping gaps in Fordoun? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
- Cracked or shrunken fire-rated sealant
Fire rated sealant in Fordoun
Filling a fire-stopping gap with standard silicone or caulk doesn’t make it fire-rated. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. We work on door frames, linear gaps and flats & HMOs, and the jobs we see most are damaged fire sealant left by other trades and open joints along the top of partitions.
For holiday lets, guest houses and community buildings in or near Fordoun, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Fordoun (AB30)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Leave it or put it right?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that does not depend on other work. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.
Why us?
- 4.9 on Google from 180+ five-star reviews
- Neat joints and a tidy finish
- ARBOMaster approved applicator
- Old sealant always removed completely
Take a look at how sealant jobs are priced and what customers say.
Common problems we fix in Fordoun
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole round the new service is not always sealed again.
If you can see any of these, it’s time to have the joints looked at:
- Joints picked up in a fire-stopping survey
- Gaps around pipes and cables through fire-resisting walls
- Holes left by a change of layout
- Old fire sealant that has split or come away
In and around Fordoun, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Before you book anyone
- When the joint can take water or movement
- How much experience the applicator has
- How the joint is cleaned and prepared
- What happens if they find a problem under the old sealant
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We seal the gaps your assessor has identified.
What affects the quote in Fordoun
There’s no set price list, because jobs vary so much. The quote depends on:
- The size of the job
- Access and height
- The old material and how stubborn it is
- Any working-time requirements on site
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
To make quoting easier, please include:
- Where the job is, and your postcode
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, drop us a line at info@mrmastic.co.uk.
Fordoun: your questions answered
Is Fordoun within the area you cover?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How do Scotland’s building regulations apply to fire-rated sealant in Fordoun?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Many fire-rated sealants work this way, but not all.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Can you fill the gap behind a fire door frame?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself and we’ll tell you if we spot problems with the door.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What we do, step by step
There’s no need to move everything out, only the area right around the joints. We protect the rest, and the work takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. Around Fordoun, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
How to prepare
- Mention if the joints have been sealed before
- Clear items away from the joints we’re working on
- Mention any leaks or damp you’ve noticed
How to get a quote
If you are in Fordoun and need fire rated sealant, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.
Read more
Workplaces and buildings in Fordoun
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
Letting a property close to Laurencekirk station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Fordoun is about 11 miles north of Montrose, in Aberdeenshire. Homes, rented property, offices and hotels in Fordoun can book us for fire rated sealant. The work is guaranteed for a year. We cover 161 towns and villages across Aberdeenshire, from the larger towns to small villages. There’s also a page for Aberdeen, roughly 22 miles from Fordoun.
We cover every part of the AB30 postcode area for fire rated sealant. If you need fire rated sealant at a property on Station Road, Redhall Avenue and Redhall Place or anywhere close by, we can help. Neighbouring places we cover for fire rated sealant include Auchenblae (2 miles north-west), Arbuthnott (3 miles east), Glenbervie (3 miles north), Laurencekirk (4 miles south-west) and Drumlithie (4 miles north-east). We also work in nearby towns such as Montrose (11 miles south), Stonehaven (10 miles north-east), Banchory (13 miles north), Newtonhill (15 miles north-east), St Cyrus (7 miles south) and Hillside (9 miles south).
Around Fordoun
The closest station to Fordoun is Laurencekirk station, roughly 3.2 miles south-west of the centre. A little further out are Drumtochty Castle (4 miles north-west). Open spaces near Fordoun include Herscha Hill.
Towns and villages near Fordoun
What else we do in Fordoun
How to look after the new joints
A little care helps the new joints last. Our advice:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Tell trades working in the building that fire seals must be put back
- Allow for resealing whenever new services are run
- Take photos of fire stopping before ceilings or boxing go back
Any fire seal that is cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Fordoun and across Aberdeenshire. Several sites can go on one quote, and we are fully insured for the work.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.