Aberdeenshire · Scotland
Fire Rated Sealant in Arbuthnott
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Arbuthnott and across Aberdeenshire. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Unsealed gaps around fire door frames
- Open joints along the top of partitions
- Open holes round services passing through fire walls
Why deal with it now?
A quick fill with any sealant to hand isn’t fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Leaving a failed joint usually makes the job bigger, not smaller. If you’re unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
What you get with us
- An ARBOMaster approved applicator
- Neat joints and a tidy finish
- Full insurance on every job
- Any old sealant cut out fully, not covered over
Fire rated sealant in Arbuthnott
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. If you’re dealing with gaps flagged on a fire risk assessment and open holes round services passing through fire walls, we can put it right, whatever the surface.
Work in a place like Arbuthnott is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
Each job carries a 12-month guarantee.
- Where
- Arbuthnott (AB30)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What happens on the day
At the end, we look at the finished work together. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on how much there is to do. Outside jobs in Arbuthnott need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Clear the area around the work
- Mention any tricky access
- Let us know if you’ve seen damp or leaks
Get a quote
If you’re in Arbuthnott and need fire rated sealant, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before we start.
Read more
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Do not paint over fire sealant until it has cured
- Check risers, ceiling voids and cupboards during building checks
- Plan fire stopping into any work that goes through walls or floors
- Keep general-purpose foam and caulk away from fire-stopping gaps
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
Open gaps don’t only matter in a fire: noise, draughts and even pests can come through too. Sealing them early helps on every front.
Signs you need fire rated sealant in Arbuthnott
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. Rushed fire stopping is common.
These are the problems we are asked about most:
- Fire seals that have cracked with movement
- Seals cut through by electricians, plumbers or data installers
- Joints picked up in a fire-stopping survey
- Door frames with gaps between frame and wall
Community buildings like Arbuthnott Parish Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What your quote should include
- Which colour the sealant will be
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- What the quote includes, VAT included or not
Surface by surface
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run so there are no open sections left.
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Also near Arbuthnott
More services for Arbuthnott
Questions from Arbuthnott
How do Scotland’s building regulations apply to fire-rated sealant in Arbuthnott?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Will you come out to Arbuthnott?
Yes, Arbuthnott is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you offer different sealant colours?
Most of the time, yes. We’ll tell you which colours the right product comes in and agree one before work begins.
Can you do several jobs on one visit?
Yes. More than one area can go on one quote.
Can you work in occupied buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use, with access planned around residents or staff. Early starts or out-of-hours work can be arranged where it’s needed.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Fire rated sealant around Arbuthnott
If you run a hotel, guest house or holiday let in a coastal place like Arbuthnott, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
Around Arbuthnott, as everywhere, fire rated sealant is only as good as the preparation behind it.
Arbuthnott is about 12 miles north-east of Montrose, in Aberdeenshire. If you need fire rated sealant in Arbuthnott, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover Aberdeenshire from our Crawley base. Arbuthnott is one of 161 places in Aberdeenshire where we work for fire rated sealant. You can also see our page for Aberdeen, about 21 miles away.
All of AB30 is within our area for fire rated sealant, from the main roads to the quietest streets. Arbuthnott is on the B967, which makes it straightforward to reach. Nearby, we also carry out fire rated sealant in Inverbervie (3 miles south-east), Roadside of Kinneff (3 miles east), Fordoun (3 miles west), Gourdon (3 miles south-east) and Drumlithie (3 miles north). We also work in nearby towns such as Montrose (12 miles south-west), Stonehaven (8 miles north-east), Banchory (14 miles north-west), Laurencekirk (6 miles south-west), Newtonhill (13 miles north-east) and St Cyrus (7 miles south-west).
Near you in Arbuthnott
Other landmarks nearby include Benholm Castle (3.1 miles south). The countryside around Arbuthnott includes Herscha Hill.
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.