Argyll and Bute · Scotland
Fire-rated sealant in Kames, Argyll and Bute
Fire rated sealant across Kames and nearby, with every bit of old sealant taken out first.
- Open joints along the top of partitions
- Fire stopping disturbed by later work
- Gaps filled with a product that is not fire-rated
Fire rated sealant in Kames
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, with a record of the products and locations if you need one. If you’re dealing with fire stopping disturbed by later work and gaps where walls meet ceilings or slabs, we can help, whatever the surface.
In a smaller place like Kames, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.
A 12-month guarantee comes as standard, so you are covered after we have gone.
- Where
- Kames (PA21)
- Wider area
- Argyll and Bute
- Cover
- One year on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Quotes for fire rated sealant in Kames
Every job gets its own quote. These are the things that affect it:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- Whether the work is at height
- The type of sealant required
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Whether it’s a home or a business
- What the problem is, such as mould, gaps, leaks or cracking
- Any access issues, like height or stairs
- A few photos by email, if you can
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, email us at info@mrmastic.co.uk.
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Workplaces and buildings in Kames
For seaside hotels, guest houses and holiday lets around Kames, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
For jobs in and around Kames, choosing the right material for each joint is as important as a tidy finish.
Kames is about 19 miles west of Greenock, in Argyll and Bute. If you need fire rated sealant in Kames, please drop us a line at info@mrmastic.co.uk for a quick quote. We’re based in Crawley and cover Argyll and Bute. Our Argyll and Bute coverage runs to 118 places, Kames among them. For nearby work, see our Glasgow page, about 38 miles away.
Every address in PA21 is covered for fire rated sealant. Other places close to Kames include Tighnabruaich (1 mile north), An Tairbeart (7 miles west), Port Bannatyne (7 miles east), Ardbeg (8 miles east) and Rothesay (8 miles south-east). Larger places within reach include Dunoon (13 miles east), Ceann Loch Gilb (12 miles north-west), Lochgilphead (13 miles north-west), Ardrishaig (11 miles north-west), Sandbank (13 miles north-east) and Innellan (11 miles east). If you’re somewhere remote, the job takes a little more planning, so let us know when you get in touch.
Around Kames
Open spaces near Kames include Cnoc Dubh and Asgog Loch.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Looking after it afterwards
To keep the joints looking good and working properly:
- Do not paint over fire sealant until it has cured
- Allow for resealing whenever new services are run
- Look in service cupboards and ceiling voids from time to time
- Report cracked or damaged seals as soon as you notice them
Do not add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.
Open gaps don’t only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
How it works
We bring everything the job needs with us, so you don’t need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. It normally takes a few hours for a handful of gaps, and longer for a whole building. For a place like Kames, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Let us know about parking restrictions
- Mention any sign-in or site rules at work premises
How to get a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand.
Related advice
More services for Kames
Common problems we fix in Kames
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.
These are the problems we’re asked about most:
- Open gaps behind door architraves
- Gaps around pipes and cables through fire-resisting walls
- Gaps left after a refit or conversion
- Fire stopping disturbed by later work
Around Kames, as everywhere, fire rated sealant is only as good as the preparation behind it.
What to look for in a quote
- What guarantee comes with the work
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
- What the cure time is
What the job involves on each surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both, following the tested detail.
Flats and HMOs
Converted houses often have gaps around old and new services. We seal the ones on your specification with a tested product and record where they are.
Questions from Kames
Do you cover Kames for fire rated sealant?
Yes. Our work covers the whole of Scotland, and Kames is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
Do Scottish building rules affect fire-rated sealant work in Kames?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Where are you based?
We work from Crawley. We cover Kames and the rest of Argyll and Bute.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Will the old sealant be removed?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Do you certify the fire stopping?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
Do you guarantee your work?
Yes. All our work carries a 12-month guarantee.
Are you insured?
Yes. We are fully insured.