Argyll and Bute · Scotland
Fire Rated Sealant in Lochgilphead
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Lochgilphead, backed by a 12-month guarantee. Call for a quick quote.
- Cracked or shrunken fire-rated sealant
- Door frames with gaps between frame and wall
- Open joints along the top of partitions
Fire rated sealant in Lochgilphead
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. Anything unsuitable comes out first and reseal with a fire-rated product tested for that kind of gap. We work on pipe & cable gaps, plasterboard & masonry and flats & HMOs, and people most often call us about joints picked up in a fire-stopping survey and standard silicone or caulk in a fire-stopping gap.
In a smaller place like Lochgilphead, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Place
- Lochgilphead (PA31)
- Region
- Argyll and Bute
- Cover
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
The process
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. Somewhere like Lochgilphead may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any sign-in or site rules at work premises
- Plan for the work area to be out of bounds to pets and children
How to get a quote
Getting a quote is simple: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
Advice
When it is not the sealant
To be straight with you, some problems need a different trade:
- Fire risk assessments, which need a qualified assessor
- Doors that aren’t fire doors in the first place
- Big openings where sealant alone is not the tested solution
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
Joints and surfaces we work on
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Door frames
- Pipe & cable gaps
Landlord and commercial work in Lochgilphead
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Quotes for fire rated sealant in Lochgilphead
You will get a clear quote before any work starts. It’s based on:
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- Any mould that needs treating
Combining jobs into one visit usually makes better use of the time than several visits. We will send you a clear quote for the lot.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- A few photos by email, if you can
- Where the job is, and your postcode
- Roughly how big the job is
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.
How the job changes by surface
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the sealant bonds.
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. We use a product tested in that kind of wall for the gap we’re sealing.
Why deal with it now?
A quick fill with any sealant to hand is not fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.
Why choose Mr Mastic in Lochgilphead
- We never seal over old sealant
- Neat joints and a tidy finish
- We’re fully insured
- Trusted Arbo and Everbuild sealants
Read what affects the cost and what customers say.
Fire rated sealant in Lochgilphead: local notes
For seaside hotels, guest houses and holiday lets around Lochgilphead, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
If you look after a church, hall or community building such as Christ Church, service openings in its walls need the right fire-rated sealant, as in any building. If you look after a building such as Lochgilphead High School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Lochgilphead is about 27 miles west of Greenock, in Argyll and Bute. Anywhere in PA31, we can carry out fire rated sealant at your property. Across Argyll and Bute, we cover 118 places, and Lochgilphead is one of them. You can also see our page for Glasgow, roughly 47 miles from Lochgilphead.
Work in PA31 works the same way as everywhere else we cover. Local streets include Oban Road, Wilson Road and Smithy Lane. Being close to the A83 and A816, Lochgilphead is simple for us to get to. Close by, we work in Ceann Loch Gilb (1 mile south-east), Ardrishaig (2 miles south), Cairnbaan (2 miles north-west), Bridgend (3 miles north) and Kilmichael Glassary (3 miles north). Being one of Argyll and Bute’s larger places, Lochgilphead has every kind of property, from flats to offices. If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
What’s near Lochgilphead
We work in homes and buildings around The Comm Public House, among other places. Other landmarks nearby include Mid Argyll Community Hospital (0.7 miles east). Not far away are Cam Loch.
FAQs for Lochgilphead
Do Scottish building rules affect fire-rated sealant work in Lochgilphead?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Is Lochgilphead within the area you cover?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Are you fully insured?
Yes. Mr Mastic is fully insured.
Is intumescent sealant the same as fire-rated sealant?
Intumescent means it swells when heated, helping close the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Should I try it myself first?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.