Edinburgh · Scotland

Fire Rated Sealant in Burghmuirhead

We cover Burghmuirhead for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.

  • Damaged fire sealant left by other trades
  • Unsealed gaps around fire door frames
  • Gaps filled with a product that is not fire-rated

Book fire rated sealant in Burghmuirhead

Honest limits

We won’t take on work that won’t last, so here’s what sealant can’t put right:

  • A wall that isn’t a fire-resisting element to begin with
  • Certifying a building or signing off its fire safety
  • Problems with the door itself rather than the gap around the frame

If in doubt, email us at info@mrmastic.co.uk and we will say what we think.

Joints and surfaces we work on

  • Door frames
  • Flats & HMOs
  • Pipe & cable gaps
  • Service penetrations
  • Plasterboard & masonry
  • Linear gaps

About our fire rated sealant in Burghmuirhead

We don’t assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. If you’re dealing with ordinary sealant used where a fire-rated product was needed and new service routes left unsealed after building work, we can help, whatever the surface.

Scotland has its own building regulations, with their own technical handbooks. In Burghmuirhead, as anywhere, fire-rated sealant goes in to the product’s tested details and washroom sealant is chosen to cope with heavy use.

A 12-month guarantee comes as standard.

Where
Burghmuirhead (EH10, EH11, EH9)
Wider area
Edinburgh
Guarantee
A year, on every job
Price
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

Aftercare tips

Looking after new joints is easy:

  • Keep general-purpose foam and caulk away from fire-stopping gaps
  • Keep the record of products and locations with your fire safety documents
  • Photograph sealed gaps before they’re covered up
  • Ask every contractor to reseal any fire stopping they disturb

Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.

Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.

Workplaces and buildings in Burghmuirhead

For seaside hotels, guest houses and holiday lets around Burghmuirhead, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. There are hotels and other places to stay in and around Burghmuirhead. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.

Letting a property close to Haymarket station? Then any gap left by new services in shared walls should be closed with a fire-rated product. For site and facilities teams at buildings such as Iain Tomlin School of Music, service openings in fire-resisting walls need checking after any refurbishment.

Burghmuirhead is about 1 mile south of Edinburgh, in Edinburgh. Every kind of property in Burghmuirhead can book us for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Across Edinburgh, we cover 175 places, and Burghmuirhead is one of them.

Our applicators cover all of EH10, EH11 and EH9 for fire rated sealant and the streets around it. That includes homes and businesses on Eden Lane, Spylaw Road and Canaan Lane and the roads around them. If you’re just outside Burghmuirhead, we cover Holy Corner (1 mile north), Church Hill (1 mile south), Greenhill (1 mile north-east), Merchiston (1 mile north) and Bruntsfield (1 mile north-east). Further out, we also cover Leith (4 miles north-east), Bonnington (3 miles north-east), North Leith (3 miles north), Queensferry (8 miles north-west), Timber Bush (3 miles north-east) and Lochend (3 miles north-east).

What’s near Burghmuirhead

Typical jobs here are in homes near St Cuthbert's Church, Craiglockhart Primary School and Bruntsfield Links, among other places. Also close by are Boroughmuir High School (within half a mile north), National Museums Scotland Library (1.2 miles north-east) and Golf Tavern (0.5 miles north-east). Burghmuirhead’s nearest station is Haymarket station, roughly 0.9 miles north-west. Nearby you will also find Waverley Mall (1.5 miles north-east) and Bruntsfield Hospital (within half a mile north-east). Open spaces near Burghmuirhead include Dunsapie Loch and Blackford Hill.

Map of Burghmuirhead © OpenStreetMap contributors

DIY versus a professional finish

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

Common problems we fix in Burghmuirhead

A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.

The most common problems we see are:

  • Open gaps behind door architraves
  • Sealant items on a fire risk assessment action list
  • Open joints along the top of partitions
  • New service routes left unsealed after building work

For buildings such as North Morningside Church, service openings in its walls need the right fire-rated sealant, as in any building.

What your quote should include

  • Whether the sealant suits the joint
  • How long the guarantee is
  • Whether they seal over old material or remove it
  • What the cure time is

10 questions to ask before booking

Burghmuirhead questions

Do you work in hotels near Burghmuirhead?

Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.

Can you help a landlord with a rental near Haymarket station?

Yes, we work for letting agents and landlords. Just email us at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear quote.

Is standard sealant good enough for a fire gap?

No. Standard sealants aren’t made or tested to stop fire. We cut it out and reseal with a fire-rated product.

Do I need to be at home?

We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.

Do you hold any approvals?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.

Can new sealant go over the old?

No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. It all has to come out first.

How long does fire rated sealant take?

Most jobs take anything from a few hours to several days, depending on how many gaps there are, including the preparation. We’ll confirm how long when we quote.

Do you cover Burghmuirhead?

Yes. We work in Burghmuirhead, as part of our work across South East England, London and Scotland. To book, send an email to info@mrmastic.co.uk.

How it works

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take anything from a few hours to several days, depending on how many gaps there are. Inside a flat in Burghmuirhead, the job is planned with you; outside, shared parts may need the factor or other owners involved. Tell us which applies when you book.

  1. We go through the gaps on your list or survey and check each one’s size and substrate.
  2. Old or unsuitable sealant is cut out and the gap cleaned.
  3. We put in whatever backing or fill the product detail specifies.
  4. We apply the fire-rated or intumescent sealant to the specified depth and tool it.
  5. We record the locations and products used for your records.

Getting ready for the visit

  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention any leaks or damp you’ve noticed
  • Clear the area around the work

How to get a quote

To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.

Ask for a quote

Read more

What affects the cost of fire rated sealant

Call for a quick quote. The main things that affect it are:

  • The number of rooms or windows
  • How much there is to do
  • How much old sealant there is and how hard it is to remove
  • Access and height

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.

Helping us quote

Photos by email are helpful but not essential. Please mention:

  • Roughly how big the job is
  • A few photos by email, if you can
  • Whether it has been sealed before
  • What the problem is, such as mould, gaps, leaks or cracking

Getting a quote is simple: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand.

How the job changes by surface

Flats and HMOs

Conversions usually leave a mix of old and new service holes. We seal the ones on your specification with a tested product.

Plasterboard walls

We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job