Glasgow · Scotland
External Mastic in Pollokshaws
Professional external mastic in and around Pollokshaws, with every bit of old sealant taken out first and a 12-month guarantee.
- Panel joints letting water in
- Brick movement joints where the sealant has split
- Joints pointed up with cement by mistake
Common problems we fix in Pollokshaws
Joints sealed without backing rod, or far too deep, rarely last. Sealant bonded to three sides has nowhere to go and tears as soon as the joint widens.
Most people get in touch after spotting one of these:
- Leaking joints around cladding and façade panels
- Moss and dirt in joints with no sealant left
- Damp patches traced to an open external joint
- Sealant that has lost its bond to the brick or render
For site and facilities teams at buildings such as Shawlands Academy, its movement joints, gutters and trims need looking after like any other building’s.
What to look for in a quote
- What happens if the job turns out different
- Who does the work, and how experienced they are
- Is VAT in the price?
- Which sealant they’ll use, and why
External mastic for homes and businesses in Pollokshaws
For buildings in Pollokshaws, we reseal external joints of all kinds, from brick movement joints to cladding panels. The preparation is the same whatever the wall: clean, sound faces and a controlled depth. Common call-outs are for joints where the bead has come unstuck and movement joints filled with mortar instead of sealant, across copings & trims, render & cladding joints and concrete & block.
Gutters and downpipes on tall city tenements are a long way up, so a leaking joint can run down the stone for months before anyone notices. In Pollokshaws, access needs planning, and work on shared parts may need the other owners’ agreement.
You’re covered for a year from the day we finish. If anything isn’t right with it, email us at info@mrmastic.co.uk.
- Where
- Pollokshaws (G41, G43, G42)
- Wider area
- Glasgow
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What else we do in Pollokshaws
How the visit works
On the day, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before any work begins. The work usually takes anything from a few hours to several days, depending on the building. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. For a job in Pollokshaws, tell us the floor, how the door entry system works and where we can park nearby.
- First, the joints are inspected and the access agreed.
- We cut out the old mastic and rake out anything in the joint.
- Joint faces are cleaned back and primed if the sealant needs it.
- We fit closed-cell backing rod to control the depth.
- The exterior sealant is applied, tooled and checked along its length.
Before we arrive
- Mention if the joints have been sealed before
- Tell us if parking is tricky
- Let us know if you’ve seen damp or leaks
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, email us at info@mrmastic.co.uk.
Read more
What affects the quote in Pollokshaws
Call for a quick quote. The main things that affect it are:
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
- Whether the work is at height
- How many rooms, windows or areas are involved
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and agree the price before starting.
What we need to know
What to tell us when you ask for a quote:
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- How we’d reach the joints
- The rough size of the job
If you’re in Pollokshaws and need external mastic, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Leave the joints unpainted unless we have said otherwise
- Never let anyone fill a movement joint with mortar
- Clear growth from the base of walls and joints
- Look over the joints every year, ideally after winter
Follow the cure time we give you before the joint is knocked or disturbed. The surface skins over quickly, but full cure takes longer.
Act while the splits are small. Then it’s a straightforward cut-out and reseal.
Your questions about external mastic in Pollokshaws
Is Pollokshaws in your area for external mastic?
Yes. We work across all of Scotland, and Pollokshaws is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.
Do you work for landlords with property near Pollokshaws West station?
Yes. We work for letting agents and landlords as well as homeowners. You can email us at info@mrmastic.co.uk with the details for a clear quote.
How long does the job take?
That depends on how much there is to do, but as a guide it takes a few hours to a few days, depending on the length of joint and the access. We’ll tell you when we quote.
Can you reach joints on upper floors?
It depends on the building. Where joints can be reached safely, we’ll do them. Give us some details and we will confirm the access.
Will the new joint stand out?
We choose a sealant colour to suit the brick, stone or render so the joint blends in. There’s a wide choice of exterior colours.
How much does external mastic cost in Pollokshaws?
It depends on the job, so we quote each one individually. To get one, send an email to info@mrmastic.co.uk and tell us what needs doing and where.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Pollokshaws buildings and the weather
The west of Scotland is wetter than the east, so there’s plenty of rain for movement joints and outside wall joints to keep out. Under the Tenements (Scotland) Act 2004, shared parts of a tenement, such as the roof and outside walls, are looked after by the owners together, and many buildings use a factor to arrange it. Your title deeds say which parts are shared.
Pollok House, about 0.9 miles west, is one of the historic houses in the wider area around Pollokshaws, and older homes nearby need a sealant that suits their walls. Letting a property close to Pollokshaws West station? Then outside joints that have cracked can let damp into a rental, so check them between lets.
Pollokshaws is about 2 miles south of Glasgow, in Glasgow. Our applicators cover external mastic for householders, landlords and businesses in Pollokshaws and nearby. Our Glasgow coverage runs to 183 places, and Pollokshaws is one of them.
Here we cover the G41, G43 and G42 postcode area for external mastic. You’ll find streets such as Haggs Road, Hector Road and Lochlea Road, all of which we cover. Pollokshaws sits on or near the A77. Neighbouring places we cover for external mastic include Auldhouse (1 mile south-west), Shawlands (1 mile north-east), Langside (1 mile east), Hillpark (1 mile south) and Crossmyloof (1 mile north). Larger places within reach include Hillhead (3 miles north), Dowanhill (4 miles north), Woodlands (3 miles north), Woodside (4 miles north), North Kelvinside (4 miles north) and Partickhill (3 miles north).
Local landmarks in Pollokshaws
Typical jobs here are in homes near Couper Institute and Library, The Sir John Stirling Maxwell pub and Pollok Country Park, among other places. Pollokshaws has its own railway station: Pollokshaws West station. Well-known places in the area include Silverburn Shopping Centre (1.7 miles west) and Glasgow Victoria Infirmary (1.1 miles east). Not far away are Cathkin Braes.
For landlords and businesses
For anyone letting property in or around Pollokshaws, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Honest limits
We’ll always be straight with you, so here’s what sealant can’t fix:
- Cracking across the wall rather than at a joint
- Rising or penetrating damp from elsewhere in the wall
- Cutting new joints into brickwork, which is building work rather than sealant work
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Where we work in Pollokshaws
- Concrete & block
- Brickwork movement joints
- Façade panels
- Render & cladding joints
- Joints between brick and frames
- Copings & trims
Why act early in Pollokshaws
A properly done movement joint is an even line in a colour that suits the wall. A hurried job with smeared edges and no backing looks worse and fails sooner, so it pays to do it properly once. Wind-driven rain gets into any failed joint on the outside of a city building, and in a tall building in Pollokshaws, damp can travel a long way before it shows.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
What you get with us
- You choose the colour before work begins
- A choice of colours where the product allows
- More than 20 years in sealant work
- Rated 4.9 stars on Google
Read what affects the cost or what customers say.