Glasgow · Scotland
Bathroom & kitchen resealing in Pollokshaws, Glasgow
Professional bathroom resealing in and around Pollokshaws, with old sealant always removed completely and a 12-month guarantee.
- Black mould in the silicone that will not clean off
- Shrunken sealant along the back of a worktop
- Leaking joints on a shower screen
FAQs for Pollokshaws
Can you help a landlord with a rental near Pollokshaws West station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can drop us a line at info@mrmastic.co.uk with the details for a clear quote.
Can a failed shower seal in a tenement flat in Pollokshaws leak into the flat below?
Yes, it can. In a tenement, water that gets past failed sealant or cracked grout can run under the bath or tray and through to the ceiling below, and then the repair involves your neighbours too. It’s worth sorting sealant and grout before it gets that far.
How long does a bath or shower reseal take?
That depends on the number of joints and the state of the old sealant. For most single baths or showers, allow a couple of hours.
How long before the new sealant can get wet?
Generally after around 24 hours. We will tell you the cure time for the product we used.
Do you work in Pollokshaws?
Yes, we do. Our applicators work in Pollokshaws, and the service is the same as everywhere else.
Do you guarantee your resealing?
Yes. All our work comes with a 12-month guarantee, and we are fully insured.
Do you take out the old sealant first?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
What do you need from me for a quote?
Tell us what needs doing and where. If we need more, we will ask.
How we handle bathroom resealing in Pollokshaws
It isn’t only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you have new sealant laid over old sealant that is now lifting and black mould in the silicone that won’t clean off, we can help, whatever the surface.
From stone-built tenements to new flats and suburban houses, Pollokshaws is in a city with every kind of home. Generally soft Scottish water means less limescale, but steam and poor ventilation still let mould into the sealant and grout.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Pollokshaws (G41, G43, G42)
- Wider area
- Glasgow
- Cover
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Surface by surface
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Basins & vanity units
Basin joints are short and close to eye level: so we keep the line tidy and even, finished in a colour that suits the basin.
Also in Pollokshaws
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
For anyone letting property in or around Pollokshaws, several properties can be quoted together. Send us the addresses and the work at each, and pictures by email help.
What bathroom resealing looks like in Pollokshaws
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For landlords with property near Pollokshaws West station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Pollokshaws is about 2 miles south of Glasgow, in Glasgow. Across the G41 area, we can carry out bathroom resealing at your property. Pollokshaws is one of 183 towns and villages in Glasgow we cover.
Here we cover the G41, G43 and G42 postcode area for bathroom resealing. Whether your property is on Haggs Road, Hector Road and Lochlea Road or anywhere close by, we can help. Main roads around Pollokshaws include the A77, which makes travel easy. If you are just outside Pollokshaws, we cover Auldhouse (1 mile south-west), Shawlands (1 mile north-east), Langside (1 mile east), Hillpark (1 mile south) and Crossmyloof (1 mile north). Further out, we also cover Hillhead (3 miles north), Dowanhill (4 miles north), Woodlands (3 miles north), Woodside (4 miles north), North Kelvinside (4 miles north) and Partickhill (3 miles north).
Near you in Pollokshaws
Typical jobs here are in homes near Couper Institute and Library, The Sir John Stirling Maxwell pub and Pollok Country Park, among other places. There’s a railway station in Pollokshaws itself: Pollokshaws West station. Other landmarks nearby include Silverburn Shopping Centre (1.7 miles west) and Glasgow Victoria Infirmary (1.1 miles east). Green spaces nearby include Cathkin Braes.
Common problems we fix in Pollokshaws
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
Signs it’s time to call us include:
- Damp behind the bath or under the tray
- Gaps where the bath or tray has moved
- Gaps between the worktop and the wall
- Two layers of silicone, both failing
For site and facilities teams at buildings such as Shawlands Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before booking
- Which colour the sealant will be
- How the joint is cleaned and prepared
- Whether the sealant suits the joint
- What happens if the job turns out different
What we do, step by step
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes around two hours for one bath or shower, longer for a whole bathroom, including the tidy-up. In a city area like Pollokshaws, parking may be by permit or pay-and-display, so tell us what’s nearby. For flats, mention the door entry system and any shared-stair arrangements.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, generally around 24 hours.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know if you’ve seen damp or leaks
- Keep children and pets away from the work area
How to get a quote
We do not publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.
Read more
Honest limits
New sealant can’t fix everything, and we’ll tell you before we start. It will not solve:
- Damage behind the tiles that needs a tiler
- A bath or tray that moves because it isn’t properly supported
- Cracked or missing grout between tiles (that’s regrouting)
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
Surfaces we seal
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
- Shower trays & enclosures
- Baths
- Kitchen worktops & upstands
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Avoid abrasive pads on the sealant
- Wait for the cure time we give you
- Clean with a mild bathroom cleaner and a soft cloth
- Squeegee the walls and tray after use
Keep bottles and razors off the sealant line, as they hold water against it. A quick squeegee after showering helps the joint dry.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Why deal with it now?
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. Lumpy sealant with smears on the tiles has the opposite effect. For landlords in Pollokshaws, damp and leaks can be a Repairing Standard issue, so it’s worth fixing failed sealant before a tenant reports it.
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear price for the lot.
Why book with us
- Approved under the ARBOMaster scheme
- A sealant colour to suit the surroundings
- Neat joints and a tidy finish
- Every job guaranteed for a year