Glasgow · Scotland
Bathroom Resealing in North Kelvinside
Bathroom resealing for North Kelvinside and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Smears of silicone across the tiles
- Water escaping at the shower enclosure
- Black mould in the silicone that won’t clean off
Bathroom resealing in North Kelvinside
Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you’re dealing with water escaping at the shower enclosure and a joint torn by a bath that flexes, we can help, on basins & vanity units, baths and sinks & splashbacks alike.
Scotland’s cities have a lot of flats, from sandstone or granite tenements to modern blocks, as well as houses in the suburbs. Generally soft Scottish water means less limescale, but steam and poor ventilation still let mould into the sealant and grout.
Big or small, you get the same one-year guarantee in North Kelvinside and across Glasgow.
- Place
- North Kelvinside (G20, G12, G4)
- Wider area
- Glasgow
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
We work for landlords and agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Look for lifting corners and small gaps now and then
- Let new sealant cure fully before it gets wet
- Use gentle cleaners on the silicone
- Dry worktop joints after washing up
In a kitchen, do not let water sit along the back of the worktop and keep hot pans off the bead. A dry joint lasts longer.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. Resealing before that happens protects the worktop.
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Do you need bathroom resealing in North Kelvinside?
No sealant lasts indefinitely. Every shower, every splash and every wipe with a cleaner slowly wear it down, so its life depends on how the room is used, cleaned and aired.
If you can see any of these, it’s time to have the joints looked at:
- Water getting behind the kitchen upstand
- Lumpy, uneven sealant from a DIY attempt
- Cracked, shrunken or lifting silicone
- Mouldy sealant that has gone black
Schools such as College of Piping are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Questions to ask before you book
- Whether they seal over old material or remove it
- When the joint can take water or movement
- Are they insured?
- Which sealant they’ll use, and why
What affects the cost of bathroom resealing
Your quote is based on your job. We take into account:
- Whether the work is at height
- How much old sealant there is and how hard it is to remove
- The type of sealant required
- The number and length of the joints
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Asking for a quote
When you contact us, it’s useful to know:
- Any access issues, like height or stairs
- Whether it’s a home or a business
- The address or postcode of the job
- Whether it has been sealed before
Need a quote? Please send an email to info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Nearby places to North Kelvinside
Also in North Kelvinside
North Kelvinside questions
I let a flat near Possilpark & Parkhouse station. Can you help?
Yes, landlords and agents are among the people we work for. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
I’m in a tenement in North Kelvinside. Could worn sealant affect the flat downstairs?
Yes, and the first sign is often a mark on the ceiling below. Cutting out the old sealant and laying a fresh bead puts a stop to it.
Do you reseal kitchen worktops and sinks too?
Yes, often alongside a bathroom. Where it’s needed by the sink, we use a food-safe sealant.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Is it OK to put new sealant on top of the old bead?
No. Fresh silicone cannot stick to the old bead, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
How long does it take to reseal a bath or shower?
Allow a couple of hours for a single bath or shower. You will know how long to expect before any work starts.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Why deal with it now?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. Private landlords in North Kelvinside must meet the Repairing Standard, and damp or leaks can fall short of it, so failed sealant is best replaced before it becomes a complaint.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why North Kelvinside clients choose us
- Over 20 years’ experience
- Any old sealant cut out fully, not covered over
- White, clear, grey or another colour, product permitting
- One-year guarantee on every job
See how sealant jobs are priced and our reviews.
North Kelvinside homes and their sealant
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. There are hotels and other places to stay in and around North Kelvinside. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For landlords with property near Possilpark & Parkhouse station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
North Kelvinside is about 2 miles north of Glasgow, in Glasgow. Whether you are in the middle of North Kelvinside or further out, we cover bathroom resealing for every kind of property. Across Glasgow, we cover 183 places, and North Kelvinside is one of them.
Here we cover the G20, G12 and G4 postcode area for bathroom resealing. We cover properties on Eton Lane, Park Road and Oban Lane. Other places close to North Kelvinside include Woodside (1 mile south-east), Kelvinbridge (1 mile south), Hillhead (1 mile south-west), Woodlands (1 mile south) and Ruchill (1 mile north-east). Further out, we also cover Calton (3 miles south-east), Langside (4 miles south), Yoker (4 miles west), Mount Florida (4 miles south), Hillpark (5 miles south) and Shawlands (4 miles south). Being one of Glasgow’s larger places, North Kelvinside has homes, rented property and businesses of every kind.
Near you in North Kelvinside
Locally, jobs take us to homes and businesses close to Church Street Primary School, Glasgow University Library and Hillhead High School, among other places. Also close by are The Crosslands pub (less than half a mile north-west) and Kelvingrove Park (0.8 miles south-west). The closest station to North Kelvinside is Possilpark & Parkhouse station, roughly 1.1 miles north-east of the centre. Well-known places in the area include Chinatown (0.9 miles south-east) and Oakbank Hospital (0.7 miles south-east). Not far away are Castle Hill and Kilmardinny.
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes around two hours for one bath or shower, longer for a whole bathroom, depending on the amount of work. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. For a job in North Kelvinside, tell us the floor, how the door entry system works and where we can park nearby.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
Before we arrive
- Mention any parking rules near the property
- For business premises, tell us about site rules or sign-in
- Try not to wet indoor joints just before the visit
Getting a quote
To get a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.