Kent · England
Bathroom Resealing in Woodland
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Woodland and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- A joint torn by a bath that flexes
- A bead that has pulled away from the tiles
- Water getting behind the kitchen upstand
When it is not the sealant
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Tiles that have come away from the wall
- A leaking waste, trap or valve
- Failed grout lines across the wall
If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Where we work in Woodland
- Wet rooms
- Sinks & splashbacks
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
- Shower trays & enclosures
Bathroom resealing for homes and businesses in Woodland
Homes in Woodland have the same weak spots as anywhere else: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. We are often asked to deal with gaps between the worktop and the wall and sealant that has split, shrunk or peeled away, on baths, shower trays & enclosures and basins & vanity units.
Somewhere as small as Woodland, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Big or small, it’s backed by our 12-month guarantee in Woodland and across Kent.
- Location
- Woodland (CT18)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Common problems we fix in Woodland
The wrong product fails fast. Acrylic caulk and general-purpose sealants are not designed for a joint that is wet every day, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
Common reasons people contact us are:
- Lumpy, uneven sealant from a DIY attempt
- Damp behind the bath or under the tray
- Water escaping at the shower enclosure
- Shrunken sealant along the back of a worktop
If you let a flat or house near Westenhanger station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Before booking anyone
- Whether all the old sealant comes out first
- How long to leave it before use
- What guarantee comes with the work
- How much experience the applicator has
Woodland questions
Can you do bathroom resealing in Woodland?
Yes. Our work covers London and the South East, and Woodland is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
Can you help a landlord with a rental near Westenhanger station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
What does bathroom resealing cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
Do you have insurance?
Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you will get one quote.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. Then phone 0345 464 0079 or send us an email.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we are using and why.
How long does a bath or shower reseal take?
Allow a couple of hours for a single bath or shower. You’ll know how long to expect before any work starts.
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Never pick at the silicone with a blade
- Wait for the cure time we give you
- Keep the fan on for a while after bathing
- Don’t leave water standing on kitchen joints
Keep water off the new bead until it has cured, which is generally around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. A reseal in time can save the worktop.
More services for Woodland
Why it’s worth doing now in Woodland
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that’s a far bigger job than a reseal. In a small place like Woodland, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why choose Mr Mastic in Woodland
- More than 20 years in sealant work
- Old sealant always removed completely
- You choose the colour before work begins
- Every job guaranteed for a year
Read what affects the cost and customer reviews.
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We work for landlords and letting agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Woodland homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Lyminge Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Woodland is about 4 miles north of Hythe, in Kent. Whether you’re in the middle of Woodland or further out, we cover bathroom resealing for every kind of property. Our Kent coverage runs to 922 places, Woodland among them. There’s also a page for Chelmsford, about 49 miles away.
Work in CT18 is quoted and booked the same way as anywhere else. We also cover Skeete (1 mile south-west), Hemsted (1 mile north-west), Lyminge (1 mile east), Rhodes Minnis (1 mile north-east) and Ottinge (1 mile east). Further out, we also cover Ashford (9 miles west), Canterbury (10 miles north), Dover (10 miles east), Folkestone (5 miles south-east), Whitstable (15 miles north) and Deal (15 miles east).
What’s near Woodland
For rail, the closest station is Westenhanger station, about 2.9 miles south-west of the centre. Well-known places in the area include Royal Victoria Hospital (5.6 miles south-east) and Saltwood Castle (3.6 miles south). The countryside around Woodland includes Tolsford Hill.
How the visit works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes around two hours for one bath or shower, longer for a whole bathroom for a typical job. In a small place like Woodland, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- Mention any tricky access
- Let us know about parking restrictions
- Tell us about any water getting in
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.