Kent · England
Woodland External Mastic
External mastic for Woodland and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Moss and dirt in joints with no sealant left
- Sealant pulling away from one side of the joint
- Water getting into walls through failed joints
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
External mastic in Woodland, done properly
Short cuts in external joints show up within a season or two. New sealant over old, joints packed with mortar and beads with no backing rarely last long. We take the old material out and do it properly. If you’re dealing with rain getting behind render or cladding at a joint and failed sealant between panels on a façade, we can help, on copings & trims, façade panels and brickwork movement joints alike.
Somewhere as small as Woodland, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
Each job carries a 12-month guarantee.
- Where
- Woodland (CT18)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
External mastic in Woodland: local notes
The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Acrise Place (about 2.9 miles east) nearby, there’s older building stock in the area around Woodland as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
For landlords with property near Westenhanger station, split movement joints are easy to miss on a rental until damp shows inside. Historic houses such as Acrise Place, about 2.9 miles east, show how far back building around Woodland goes.
Woodland is about 4 miles north of Hythe, in Kent. Jobs in Woodland get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Woodland is one of 922 places in Kent we cover. For nearby work, see our Chelmsford page, about 49 miles away.
We cover every part of the CT18 postcode area for external mastic. We also cover Skeete (1 mile south-west), Hemsted (1 mile north-west), Lyminge (1 mile east), Rhodes Minnis (1 mile north-east) and Ottinge (1 mile east). Further out, we also cover Ashford (9 miles west), Canterbury (10 miles north), Dover (10 miles east), Folkestone (5 miles south-east), Whitstable (15 miles north) and Deal (15 miles east).
Landmarks near Woodland
The nearest railway station is Westenhanger station, roughly 2.9 miles south-west of the centre. A little further out are Royal Victoria Hospital (5.6 miles south-east) and Saltwood Castle (3.6 miles south). Not far away are Tolsford Hill.
Other services in Woodland
What affects the quote in Woodland
Some jobs are bigger than they look, and some smaller. The main factors:
- The old material and how stubborn it is
- The type of sealant required
- How easy the joints are to reach
- Working hours on commercial sites
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- How we’d reach the joints
- Photos by email, if that is easy
- The address or postcode of the job
- The rough size of the job
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.
What sealant work can’t fix
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Render that is blown, hollow or coming away
- Cracking across the wall rather than at a joint
- Walls that need new movement joints cut into them
If in doubt, call 0345 464 0079 or send us an email and we will say what we think before you book.
Joints and surfaces we work on
- Joints between brick and frames
- Concrete & block
- Copings & trims
- Render & cladding joints
- Façade panels
- Brickwork movement joints
FAQs for Woodland
Do you cover Woodland for external mastic?
Yes. We work across London and the South East, and Woodland is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Do you cover smaller places like Woodland?
Yes, Woodland is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for hotels and businesses?
Yes. Commercial and hotel work is a large part of what we do. We can talk about working times when we quote.
Which products do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Can new sealant go over the old?
No. The old sealant always comes out first, so the new joint bonds to clean surfaces.
Will the new joint stand out?
There’s a good range of exterior colours, including greys, browns, whites and stone tones. We pick the one that suits your wall best.
Is there any odour?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
For landlords and businesses
If you manage several properties in or around Woodland, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured.
The process
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a few hours for a handful of joints, longer for a whole elevation from start to finish. Somewhere as small as Woodland, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Each joint is checked and the colour of the new sealant agreed.
- We take out the old sealant until the faces are sound.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
Before we arrive
- Try not to wet indoor joints just before the visit
- Plan for the work area to be out of bounds to pets and children
- Mention any leaks or damp you’ve noticed
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Related advice
Do you need external mastic in Woodland?
Sunlight, wet weather and frost wear exterior sealant down. Over the years it hardens, cracks on the surface and loses its give, so the joint eventually tears or comes away from one side.
Signs it’s time to call us include:
- Damp patches traced to an open external joint
- Failed sealant between panels on a façade
- Sealant that has lost its bond to the brick or render
- Weathered mastic that no longer stretches
Managing a site like Lyminge Church of England Primary School? Then its movement joints, gutters and trims need looking after like any other building’s.
Comparing quotes
- What guarantee comes with the work
- What the quote includes, VAT included or not
- How hidden problems are handled
- How the surfaces are prepared before sealing
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Show decorators and builders where the movement joints are
- Ask before painting over external sealant
- Walk round the building once a year and look at the joints
- Have failed joints looked at early
Only paint over the joint if we have confirmed the sealant can take paint. Many exterior sealants aren’t designed to be painted, and paint can crack as the joint moves.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.