Kent · England
Tonbridge Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Tonbridge and across Kent. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Damp behind the bath or under the tray
- Failed sealant on the screen profile
- Lumpy, uneven sealant from a DIY attempt
How we handle bathroom resealing in Tonbridge
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. If you have a reseal done over the top of the old bead and sealant that has split, shrunk or peeled away, we can help, whatever the surface.
Plenty of homes in a town like Tonbridge have had new bathrooms and kitchens over the years, some more than once. A common problem is new sealant laid over old, which never bonds properly, which is why all the old material has to come out first.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Tonbridge (TN9, TN10, TN11)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Why act early in Tonbridge
A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. Lumpy sealant with smears on the tiles has the opposite effect. In Tonbridge, as anywhere, most leaks start as a small gap in a joint, and early is when they’re cheapest and quickest to sort.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why Tonbridge clients choose us
- Over 20 years’ experience
- Sanitary silicone with an anti-fungal additive in wet areas
- We agree the colour with you first
- A 12-month guarantee on all work
See our cost guide and our reviews.
Surface by surface
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
Shower trays & enclosures
A tray that rocks will split any sealant. Movement is checked before anything is resealed, and if the tray needs refixing, we’ll say so.
Common questions in Tonbridge
Is Tonbridge in your area for bathroom resealing?
Yes, Tonbridge is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear quote.
Do you work for landlords with property near Tonbridge station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.
How long before the new sealant can get wet?
Silicone is touch-dry quite quickly, but it takes longer to cure. Keep water off it for around 24 hours, or follow the cure time we give you.
Do you guarantee your resealing?
Yes, a one-year guarantee. Good ventilation and gentle cleaning help it last.
Can I add another job to the visit?
Yes. More than one area can go on one quote.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Do you have insurance?
Yes. We are fully insured.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator.
What affects the cost of bathroom resealing
Call for a quick quote. The main things that affect it are:
- Any working-time requirements on site
- Which sealant suits the joint
- The amount of work
- How many rooms, windows or areas are involved
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Helping us quote
You don’t need to know the technical terms. Just tell us:
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
- How many joints, rooms or windows are involved
- Any access issues, like height or stairs
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, phone 0345 464 0079 or send us an email.
What bathroom resealing looks like in Tonbridge
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as New Beacon School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Tonbridge station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For an older house near a landmark such as Church of St Peter and St Paul, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Tonbridge is about 12 miles south-west of Maidstone, in Kent. Every kind of property in Tonbridge is covered for bathroom resealing. Every job comes with our 12-month guarantee. Across Kent, we cover 922 places, and Tonbridge is one of them. There’s also a page for Crawley, roughly 21 miles from Tonbridge.
Every address in TN9, TN10 and TN11 is within our area for bathroom resealing. If you need bathroom resealing at a property on High Street, Old London Road and London Road or anywhere close by, we can help. Main roads around Tonbridge include the A26 and A227, so getting to you is simple. If you are just outside Tonbridge, we cover Lower Haysden (2 miles south-west), Leigh (3 miles west), Bidborough (3 miles south-west), Southborough (3 miles south) and Printstile (3 miles south-west). Within a short drive, we also cover Maidstone (12 miles north-east), Sevenoaks (7 miles north-west), Royal Tunbridge Wells (4 miles south), Swanley (14 miles north), Kings Hill (7 miles north-east) and Foley Park (12 miles north-east).
What’s near Tonbridge
Typical jobs here are in homes near Haysden Country Park, Royal Rise Primary School and Hillview School for Girls and the streets around them. Tonbridge’s nearest station is Tonbridge station, about 0.6 miles south-west of the centre. Nearby you will also find The Milne Museum (under half a mile west) and Tonbridge Castle (under half a mile south-west). Green spaces nearby include Tudeley Woods RSPB reserve and Barden Lake.
Honest limits
We’ll always be straight with you, so here’s what new sealant will not do:
- Movement from a bath with loose feet or no proper support
- Loose or hollow tiles, or failed tanking behind them
- Water getting in through the grout rather than the sealant
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
Surfaces we seal
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
What we do, step by step
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes two to three hours for a typical bath, depending on how much old sealant there is. A visit in Tonbridge needs access to the work and a place to park close by. For outside work, let us know about side access, gates and any upper-floor joints.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Mention if the joints have been sealed before
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.