Kent · England
Bathroom & kitchen resealing in Street End, Kent
We cover Street End for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Mouldy sealant that has gone black
- A messy, uneven bead from a previous reseal
- Water escaping at the shower enclosure
How we handle bathroom resealing in Street End
Homes in Street End have the same weak spots as anywhere else: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. Typical jobs include black mould in the silicone that won’t clean off and shrunken sealant along the back of a worktop, across sinks & splashbacks, baths and shower trays & enclosures.
In a village or hamlet like Street End, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or email us.
- Location
- Street End (CT4)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Bathrooms and kitchens in Street End
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Managing a site like Simon Langton Grammar School for Boys? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Canterbury East station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Street End is about 2 miles south of Canterbury, in Kent. Homes, rented property, offices and hotels in Street End is covered for bathroom resealing. The work is guaranteed for a year. Our Kent coverage runs to 922 places, Street End among them. You can also see our page for Chelmsford, roughly 43 miles from Street End.
Jobs for bathroom resealing in CT4 is quoted and booked the same way as anywhere else. That includes homes and businesses on White Hill Close, Bridge Road and Faussett Hill and the roads around them. Other places close to Street End include Nackington (1 mile north-east), Lower Hardres (1 mile south), Stuppington (1 mile north-west), Pett Bottom (1 mile south-east) and Upper Hardres (2 miles south). Further out, we also cover Ashford (12 miles south-west), Dover (12 miles south-east), Folkestone (12 miles south), Whitstable (8 miles north), Deal (14 miles east) and Faversham (10 miles north-west).
What’s near Street End
For rail, the closest station is Canterbury East station, roughly 2.1 miles north of the centre. A little further out are Rupert Bear Museum (2.3 miles north) and Kent and Canterbury Hospital (1.5 miles north). The countryside around Street End includes Blean Woods RSPB Reserve.
What the job involves on each surface
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Filling the bath first allows for that movement.
Basins & vanity units
Basin joints are short and close to eye level: the bead is right in front of you, so it’s tooled cleanly and evenly, in white, clear or a colour to suit.
When to call us in Street End
No sealant lasts indefinitely. Daily water, heat and cleaning products take their toll over the years, so its life depends on how the room is used, cleaned and aired.
If you can see any of these, it’s time to have the joints looked at:
- Leaks into the floor or ceiling below
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
- Lumpy, uneven sealant from a DIY attempt
In the older streets around Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Comparing quotes
- When the joint can take water or movement
- What guarantee comes with the work
- Whether VAT is included
- What product goes in the joint
Towns and villages near Street End
Also in Street End
Street End questions
Is Street End within the area you cover?
Yes, Street End is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is Street End in your area for bathroom resealing?
Yes, Street End is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
When can I use the bath or shower again?
After around 24 hours in most cases. We’ll tell you the cure time for the product we used.
Do you take out the old sealant first?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Is white the only colour available?
You’re not limited to white: white, clear and colours to suit tiles and worktops. We can help you pick when we quote.
Where do you work from?
We work from Crawley. Our applicators cover Street End.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
How much does bathroom resealing cost in Street End?
It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or email us and let us know what needs doing and where.
What affects the quote in Street End
We don’t publish a price list, because jobs vary so much. What we look at:
- The product the joint needs
- The amount of work
- When we can work, for business premises
- Access and height
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Any access issues, like height or stairs
- Roughly how big the job is
- Whether it’s a home or a business
- Where the job is, and your postcode
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved.
Looking after it afterwards
Joint life depends on how it’s used and looked after. We suggest:
- Dry worktop joints after washing up
- Keep bottles off the sealant line
- Wipe the sealant dry after showering
- Use gentle cleaners on the silicone
Do not stand bottles along the bead, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
How it works
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes around two hours for one bath or shower, longer for a whole bathroom. In a small place like Street End, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Keep children and pets away from the work area
- Mention any parking rules near the property
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Advice
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- A cracked shower tray or bath (that needs repair or replacement)
- A bath or tray that moves because it is not properly supported
- Failed grout lines across the wall
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Kitchen worktops & upstands
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Sinks & splashbacks
Should I try it myself first?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.