Kent · England

Lower Hardres Bathroom Resealing

Problem with your baths, showers and worktops in Lower Hardres? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Water getting behind the bath panel
  • Water getting behind the kitchen upstand
  • Failed sealant on the screen profile

Bathroom resealing near Lower Hardres

Bathroom resealing in Lower Hardres, done properly

Across Lower Hardres, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. Common call-outs are for shrunken sealant along the back of a worktop and mouldy sealant that has gone black, on wet rooms, basins & vanity units and shower trays & enclosures.

For a small place like Lower Hardres, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.

We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.

Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles
Where
Lower Hardres (CT4)
Region
Kent
Guarantee
12 months on all our work
Quotes
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Should I try it myself first?

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.

Why act early in Lower Hardres

Fresh sealant smartens a bathroom or kitchen with very little disruption, which matters if you are letting a property or selling it. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Where a wall is exposed, as many are in small places like Lower Hardres, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.

Why Lower Hardres customers choose us

  • We agree the colour with you first
  • Full insurance on every job
  • 20+ years of sealant experience
  • A sealant colour to suit the surroundings

See our cost guide or what customers say.

How the visit works

Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes half a day or less for one room, longer when the kitchen is included. Somewhere like Lower Hardres needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We look at every joint first and check for movement or leaks.
  2. The old silicone is cut out completely, along with the film it leaves on the tiles.
  3. The joint is cleaned, degreased and treated for mould.
  4. When the joint is dry, and a bath has been filled with water, the new silicone goes on.
  5. The bead is tooled smooth and you are told the cure time, generally around 24 hours.

Getting ready for the visit

  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention any sign-in or site rules at work premises
  • Tell us if parking is tricky

Getting a quote

Need a quote? Please ring 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

Get a price

Read more

Different surfaces, different methods

Wet rooms

Wet room floors move slightly as they’re used, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.

Sinks & splashbacks

Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.

Landlords, agents and businesses in Lower Hardres

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

We also work for property managers and facilities teams in Lower Hardres and across Kent. Several sites can go on one quote.

FAQs for Lower Hardres

Is Lower Hardres in your area for bathroom resealing?

Yes. Our work covers London and the South East, and Lower Hardres is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll send you a clear quote.

Can you help a landlord with a rental near Canterbury East station?

Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.

How long does a bath or shower reseal take?

It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.

How long does the new silicone need before I use the shower?

Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.

Do I need to be at home?

For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.

Is it messy?

We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.

Is it worth trying it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Do you do kitchens as well as bathrooms?

Yes. Kitchen joints get extra degreasing before the new bead goes on, then we reseal in a colour to suit.

What affects the cost of bathroom resealing

The quote reflects the job in front of us. We take into account:

  • Whether old sealant or filler has to be cut out
  • Whether there’s mould to deal with
  • How easy the joints are to reach
  • The number and length of the joints

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.

What we need to know

When you call or email, these details help:

  • Roughly how big the job is
  • How we’d reach the joints
  • The problem you’ve noticed
  • A few pictures by email, if you can

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, call 0345 464 0079 or email us.

What we can’t put right

Some problems need a builder, plumber or other trade rather than us:

  • Water coming from the plumbing rather than the joint
  • Water getting in through the grout rather than the sealant
  • Movement from a bath with loose feet or no proper support

Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.

Surfaces we seal

  • Basins & vanity units
  • Baths
  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & upstands
  • Sinks & splashbacks

Lower Hardres homes and their sealant

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

If you let a flat or house near Canterbury East station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. Homes close to Church of St Mary include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you look after a building such as Simon Langton Grammar School for Boys, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Lower Hardres is about 3 miles south of Canterbury, in Kent. For bathroom resealing in and around Lower Hardres, please phone 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover Kent, Lower Hardres included. We cover 922 towns and villages across Kent, large and small. There’s also a page for Chelmsford, about 43 miles away.

Our applicators cover all of the CT4 postcode area for bathroom resealing. If you are just outside Lower Hardres, we cover Street End (1 mile north), Pett Bottom (1 mile south-east), Nackington (1 mile north), Upper Hardres (1 mile south) and Petham (2 miles south-west). Within a short drive, we also cover Ashford (11 miles south-west), Canterbury (3 miles north), Dover (12 miles south-east), Folkestone (11 miles south), Whitstable (8 miles north) and Deal (14 miles east).

What’s near Lower Hardres

Typical jobs here are in homes near The Duck pub. For rail, the closest station is Canterbury East station, about 2.7 miles north of the centre. Well-known places in the area include Kent and Canterbury Hospital (2.2 miles north) and Whitefriars Shopping Centre (2.9 miles north). The countryside around Lower Hardres includes Blean Woods RSPB Reserve.

Map of Lower Hardres © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job