West Sussex · England
Bathroom & kitchen resealing in Redford, West Sussex
Specialist bathroom resealing for Redford: careful preparation, the right product and tidy work. Ask us for a quick quote.
- A reseal done over the top of the old bead
- Water getting behind the bath panel
- Smears of silicone across the tiles
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Water coming from the plumbing rather than the joint
- Damage behind the tiles that needs a tiler
- A cracked shower tray or bath (that needs repair or replacement)
If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think before you book.
Where we work in Redford
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
- Basins & vanity units
Bathroom resealing in Redford, done properly
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, after which the joint is degreased and any mould treated. New silicone goes on only when the joint is fully dry. Common call-outs are for splits where the tray meets the wall and gaps between the worktop and the wall, on kitchen worktops & upstands, wet rooms and basins & vanity units.
Somewhere as small as Redford, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Big or small, it’s backed by our one-year guarantee.
- Location
- Redford (GU29)
- Wider area
- West Sussex
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What happens if it’s left?
Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite. In a small place like Redford, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why Redford clients choose us
- Fully insured
- Trusted Arbo and Everbuild sealants
- An ARBOMaster approved applicator
- Domestic, commercial and hotel work
Take a look at what affects the cost and our reviews.
Work for landlords, hotels and businesses
For anyone letting property in or around Redford, several properties can go on one quote. Just tell us the addresses and what each one needs.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
What bathroom resealing looks like in Redford
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as Church of St Luke, walls and floors in older homes can move, and sealant and grout show it first.
Redford is about 7 miles east of Petersfield, in West Sussex. Redford gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Redford is one of 371 places in West Sussex where we work. For nearby work, see our Portsmouth page.
All of GU29 is within our area for bathroom resealing, from the main roads to the quietest streets. If you’re just outside Redford, we cover Fernhurst (3 miles north-east), Linchmere (3 miles north), Kingsley Green (3 miles north-east), Woolmer Hill (4 miles north) and Hammer (4 miles north). Within a short drive, we also cover Chichester (13 miles south), Emsworth (14 miles south-west), Billingshurst (14 miles east), Portfield (13 miles south), Midhurst (3 miles south) and Arundel (15 miles south-east).
Landmarks near Redford
The nearest railway station is Liphook station, roughly 3.1 miles north. A little further out are Midhurst Museum (3.3 miles south-east) and Midhurst Community Hospital (3 miles south-east). Green spaces nearby include Cooksbridge Meadow and Wheeler's Down.
Towns and villages near Redford
What else we do in Redford
Do you need bathroom resealing in Redford?
Black mould is behind a lot of resealing. Steamy rooms that don’t dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
Any of these means the joints need attention:
- Gaps where the bath or tray has moved
- A messy, uneven bead from a previous reseal
- Failed sealant on the screen profile
- Water getting behind the kitchen upstand
If you let a flat or house near Liphook station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Questions to ask before you book
- Are they insured?
- What product goes in the joint
- How much experience the applicator has
- Is the old sealant removed completely?
Your questions about bathroom resealing in Redford
Will you come out to Redford?
Yes. Redford is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Liphook station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Can you get rid of the black mould in my sealant?
Yes. Once mould has grown into the silicone, it usually cannot be cleaned out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
How long does it take to reseal a bath or shower?
One bath or shower is around two hours’ work, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
Do you do kitchens as well as bathrooms?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.
What affects the cost of bathroom resealing
Jobs vary more than people expect. What affects the quote:
- When we can work, for business premises
- Any mould that needs treating
- The product the joint needs
- The size of the job
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and give you a clear price before we start.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
- The address or postcode of the job
- Any access issues, like height or stairs
Every job is quoted individually, so start by telling us what you need. Simply phone 0345 464 0079 or drop us an email and describe the job.
What we do, step by step
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes two to three hours for a typical bath, depending on how much old sealant there is, depending on the amount of work. In a small place like Redford, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, generally around 24 hours.
Before we arrive
- Mention any sign-in or site rules at work premises
- Mention any leaks or damp you’ve noticed
- Keep pets and children clear of the area while we work
How to get a quote
Need a quote? Please phone 0345 464 0079 or send us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Surface by surface
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We reseal the joints and will tell you if the water seems to be coming from somewhere else.