Medway · England
Bathroom Resealing in Lower Stoke
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Lower Stoke and across Medway. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Mouldy sealant that has gone black
- Lumpy, uneven sealant from a DIY attempt
- A joint torn by a bath that flexes
What affects the cost of bathroom resealing
We quote each job individually. This is what makes a difference:
- Whether old sealant or filler has to be cut out
- The product the joint needs
- The number of rooms or windows
- Mould in or behind the old joints
Combining jobs into one visit generally makes better use of the time than several visits. You will get one clear quote for the whole job.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- How we’d reach the joints
- How many joints, rooms or windows are involved
- The address or postcode of the job
- If someone has resealed it before
There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.
Bathroom resealing for homes and businesses in Lower Stoke
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. We work on shower trays & enclosures, sinks & splashbacks and wet rooms, and the jobs we see most are shrunken sealant along the back of a worktop and splits where the tray meets the wall.
Somewhere as small as Lower Stoke, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
You’re covered for a year from the day we finish. If anything isn’t right with it, ring 0345 464 0079 or email us.
- Location
- Lower Stoke (ME3)
- Wider area
- Medway
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Places near Lower Stoke
More services for Lower Stoke
When to call us in Lower Stoke
Plenty of failed sealant has been laid over the top of older sealant. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
Any of these means the joints need attention:
- Cracked, shrunken or lifting silicone
- Gaps between the worktop and the wall
- Damp behind the bath or under the tray
- Leaking joints on a shower screen
For an older house near a landmark such as Church of St Peter and St Paul, older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- Which sealant they’ll use, and why
- Is VAT in the price?
- Which colour the sealant will be
- Who does the work, and how experienced they are
Why act early in Lower Stoke
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is normally all it takes, provided the bath, tray and tiles are in good order. If something else is wrong, we’ll tell you. Around Lower Stoke, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in Lower Stoke
- More than 20 years in sealant work
- Experience in homes, commercial sites and hotels
- Sanitary silicone with an anti-fungal additive in wet areas
- Colour agreed with you before we start
Read what affects the cost and our reviews.
Lower Stoke questions
Will you come out to Lower Stoke?
Yes, Lower Stoke is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do bathroom resealing in Lower Stoke?
Yes. We work across London and the South East, and Lower Stoke is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Can you quote for more than one area?
Yes. Just list everything you need and you will get one quote.
Can I choose the colour of the sealant?
Most people choose white or clear, and other colours are available to suit tiles, trays and worktops. Tell us what you’d like when you get in touch.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
How long does it take to reseal a bath or shower?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Never pick at the silicone with a blade
- Clean with a mild bathroom cleaner and a soft cloth
- Check the joints every few months for splits or lifting
- Dry the bead with a towel now and then
Keep bottles and razors off the sealant line, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.
Lower Stoke homes and their sealant
Lower Stoke is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Managing a site like Stoke Primary Academy? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Lower Stoke is about 5 miles south-east of Canvey Island, in Medway. Every kind of property in Lower Stoke is covered for bathroom resealing. Every job comes with our 12-month guarantee. Across Medway, we cover 68 places, and Lower Stoke is one of them. Chelmsford is on our list too, around 21 miles away.
All of ME3 is covered for bathroom resealing. Streets in the area include High Street, Brook Lane and Shepherds Way, all of which we cover. Other places close to Lower Stoke include Middle Stoke (1 mile south), Stoke (1 mile south-west), Allhallows (1 mile north), Allhallows-on-Sea (1 mile north-east) and North Street (2 miles south-west). Further out, we also cover Gillingham (6 miles south-west), Chatham (8 miles south-west), Rochester (7 miles south-west), Rainham (7 miles south), Strood (8 miles south-west) and Luton (7 miles south-west).
Around Lower Stoke
Around Lower Stoke, our work takes us to homes and buildings near The Ship pub and the streets around them. For a walk, there’s Bishop Saltings.
What sealant work cannot fix
New sealant can’t fix everything, and we will tell you before any work starts. Sealant will not put right:
- A tray or bath that’s cracked through
- A leaking waste, trap or valve
- Damage behind the tiles that needs a tiler
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before you book.
What we seal
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Baths
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes half a day or less for one room, longer when the kitchen is included for a typical job. In a small place like Lower Stoke, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First the area is protected and every bit of old sealant removed.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, normally around 24 hours.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
- Tell us if parking is tricky
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply phone 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
Related advice
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.