Moray · Scotland
Kinloss Bathroom Resealing
Our applicators work in Kinloss on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly.
- Water getting behind the kitchen upstand
- Leaking joints on a shower screen
- Black mould in the silicone that won’t clean off
Bathroom resealing for homes and businesses in Kinloss
Across Kinloss, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. We’re often asked to deal with a bead that has pulled away from the tiles and new sealant laid over old sealant that is now lifting, on baths, wet rooms and shower trays & enclosures.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
Every job comes with a one-year guarantee, wherever you are in Moray.
- Place
- Kinloss (IV36)
- Region
- Moray
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How the job changes by surface
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A continuous bead along the back keeps water out, as long as the worktop itself is firmly fixed.
Why it’s worth doing now in Kinloss
Tired sealant is not a reason to replace a bath or shower. Replacing the joint is generally all it takes. If something else is wrong, we’ll tell you. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
What you get with us
- More than 20 years in sealant work
- Domestic, commercial and hotel work
- We never seal over old sealant
- Fully insured
Take a look at what affects the cost or customer reviews.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a couple of hours for a single bath or shower, depending on the size of the job. Outdoor work around Kinloss depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Mention any sign-in or site rules at work premises
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, email us at info@mrmastic.co.uk.
Related advice
Other services in Kinloss
Aftercare tips
Good habits help new joints last longer. A few tips:
- Dry the bead with a towel now and then
- Use gentle cleaners on the silicone
- Don’t leave water standing on kitchen joints
- Give the silicone its full cure time
Keep water off the new bead until it has cured, which is generally around 24 hours. After that, a quick wipe after showering helps keep it clean.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. If you spot one, it’s time to reseal.
What we are called out for in Kinloss
Sealing over old silicone is one of the commonest mistakes we find. New silicone will not bond to old silicone, so it lifts, lets water in and traps mould underneath.
It’s worth asking for a quote if you see:
- Smears of silicone across the tiles
- Black spots spreading through the bead
- New sealant laid over old sealant that is now lifting
- Sealant that has split, shrunk or peeled away
If you let a flat or house near Forres station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Comparing quotes
- How much experience the applicator has
- How long the guarantee is
- What product goes in the joint
- What preparation is included
Bathrooms and kitchens in Kinloss
Kinloss is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
For an older house near a landmark such as Kinloss Parish Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Kinloss is about 3 miles north-east of Forres, in Moray. Our applicators cover bathroom resealing for homes and businesses in Kinloss, as part of our work across Moray. We cover 58 towns and villages across Moray, from the larger towns to small villages. For nearby work, see our Aberdeen page (63 miles or so).
All of IV36 is covered for bathroom resealing, from the main roads to the quietest streets. Bathroom resealing is available to properties on North Road, Milton Way and Hatton Way and the roads around them. Neighbouring places we cover for bathroom resealing include Findhorn (2 miles north-west), Forres (3 miles south-west), Rafford (4 miles south), Alves (4 miles east) and Moor of Granary (4 miles south). Further out, we also cover Elgin (9 miles east), Lossiemouth (11 miles north-east), Ashgrove (9 miles east), Burghead (5 miles north-east), Hopeman (7 miles north-east) and Lhanbryde (12 miles east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Kinloss
Kinloss’s nearest station is Forres station, about 3.2 miles south-west of the centre. A little further out are Earnside Castle (2.2 miles east) and Leanchoil Hospital (2.6 miles south-west). Open spaces near Kinloss include Sanquhar Loch and Cluny Hill.
Questions from Kinloss
Is Kinloss in your area for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Kinloss is part of that. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we’ll send you a clear quote.
I let a flat near Forres station. Can you help?
Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before any work starts.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Where are you based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
How long will the resealing take?
A single bath or shower takes about a couple of hours, old sealant removal included. A full bathroom and kitchen can take most of a day.
How do I get a quote for bathroom resealing in Kinloss?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
Do you guarantee your resealing?
Yes, for 12 months. Looking after the joint as we suggest helps it last.
Landlord and commercial work in Kinloss
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.