Argyll and Bute · Scotland
Kilmore Bathroom Resealing
We cover Kilmore for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Splits where the tray meets the wall
- Black spots spreading through the bead
- Cracked, shrunken or lifting silicone
Bathroom resealing for homes and businesses in Kilmore
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. Typical jobs include splits where the tray meets the wall and lumpy, uneven sealant from a DIY attempt, across wet rooms, sinks & splashbacks and kitchen worktops & upstands.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
You are covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.
- Location
- Kilmore (PA34)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What we do, step by step
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take two to three hours for a typical bath, depending on how much old sealant there is. Somewhere like Kilmore may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Move anything stored near the joints
- Keep children and pets away from the work area
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Read more
How we quote for bathroom resealing
Your quote is based on your job. We look at:
- The number of rooms or windows
- The size of the job
- How easy the joints are to reach
- Any working-time requirements on site
What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.
What we need to know
Before you ask for a quote, have a think about:
- How many joints, rooms or windows are involved
- Any access issues, like height or stairs
- Whether it has been sealed before
- Where the property is
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved.
Bathroom resealing around Kilmore
Kilmore is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
Letting a property close to Oban station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. In the older streets around Kilmore Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Kilmore is about 37 miles north-west of Helensburgh, in Argyll and Bute. From the centre of Kilmore to the outskirts, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Kilmore is one of 118 towns and villages in Argyll and Bute we cover. There’s also a page for Glasgow, about 57 miles away.
Here we cover the PA34 postcode area for bathroom resealing. If you need bathroom resealing at a property on Riverside Road and Soroba Road or anywhere close by, we can help. Nearby, we also carry out bathroom resealing in Oban (3 miles north-west), Dunollie (4 miles north-west), Ganavan (4 miles north), Dunbeg (5 miles north) and Connel (6 miles north). If you are somewhere remote, the job takes a little more planning.
Local landmarks in Kilmore
Kilmore’s nearest station is Oban station, roughly 3 miles north-west. Well-known places in the area include Lorn and Islands Hospital (2.3 miles north-west) and Dunollie Castle (4.1 miles north-west). Open spaces near Kilmore include Loch Nell and Càrn Dearg.
Signs you need bathroom resealing in Kilmore
Older sealant shrinks and hardens. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Hot pans and harsh cleaners do not help.
Look out for these signs:
- Shrunken sealant along the back of a worktop
- Failed sealant on the screen profile
- Lumpy, uneven sealant from a DIY attempt
- Black mould in the silicone that will not clean off
For site and facilities teams at buildings such as Oban High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before you book anyone
- How the surfaces are prepared before sealing
- What guarantee comes with the work
- What the cure time is
- Whether the sealant suits the joint
Towns and villages near Kilmore
What else we do in Kilmore
What happens if it’s left?
Dealing with sealant early is a short job: the work takes a couple of hours for a single bath or shower. Wait for a leak and you may be looking at panels off, drying out and redecorating too. In an older home around Kilmore, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
Combining jobs into one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will give you a clear price for the lot.
Why Kilmore clients choose us
- A 12-month guarantee on all work
- Over 20 years’ experience
- 180+ five-star Google reviews
- White, clear, grey or another colour, product permitting
Read what affects the cost or our reviews.
For landlords and businesses
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured for the work.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
FAQs for Kilmore
I let a flat near Oban station. Can you help?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can drop us a line at info@mrmastic.co.uk with the details for a clear quote.
Is Kilmore within the area you cover?
Yes. Kilmore is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Where are you based?
We’re a Crawley-based firm. We work across South East England, London and Scotland.
Are you fully insured?
Yes. We are fully insured for domestic and commercial work.
What information do you need?
A short description and the location, with photos by email if possible. If we need more, we will ask.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.
Can I choose the colour of the sealant?
You’re not limited to white: clear, white and colours chosen to suit the room. We can help you pick when we quote.
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
What we cannot put right
Before you book, it’s worth knowing the limits:
- A tray or bath that’s cracked through
- Water getting in through the grout rather than the sealant
- Movement from a bath with loose feet or no proper support
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think before you book.
What we seal
- Sinks & splashbacks
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms