East Lothian · Scotland
Bathroom Resealing in Innerwick
Bathroom resealing for Innerwick and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Water escaping at the shower enclosure
- A reseal done over the top of the old bead
- Leaks into the floor or ceiling below
What we do, step by step
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes around two hours for one bath or shower, longer for a whole bathroom. For a place like Innerwick, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Mention any leaks or damp you’ve noticed
- Mention any parking rules near the property
- Clear the area around the work
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Read more
Bathroom resealing in Innerwick, done properly
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. We work on kitchen worktops & upstands, wet rooms and sinks & splashbacks, and people most often call us about a reseal done over the top of the old bead and lumpy, uneven sealant from a DIY attempt.
In and around a place like Innerwick, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
The work is covered for a year after we finish. If anything is not right with it, send an email to info@mrmastic.co.uk.
- Location
- Innerwick (EH42)
- Wider area
- East Lothian
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Do you need bathroom resealing in Innerwick?
The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
Any of these means the joints need attention:
- Mouldy sealant that has gone black
- Smears of silicone across the tiles
- Failed sealant on the screen profile
- Water getting behind the bath panel
For landlords with property near Dunbar station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Before you book anyone
- Who turns up on the day
- Whether you can choose the colour
- What happens if the job turns out different
- What the cure time is
Questions from Innerwick
Do you cover smaller places like Innerwick?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Innerwick for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Innerwick is part of that. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
Is the work guaranteed?
Yes, a one-year guarantee. Looking after the joint as we suggest helps it last.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
How long does the new silicone need before I use the shower?
We give you the cure time before we leave, and it’s normally around 24 hours. Getting it wet too early can spoil the new joint.
Can you quote for more than one area?
Of course. Doing several areas at once is generally more efficient.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
How much does bathroom resealing cost in Innerwick?
Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.
Bathrooms and kitchens in Innerwick
Innerwick is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In the older streets around Innerwick Parish Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Innerwick is about 13 miles east of Haddington, in East Lothian. Every kind of property in Innerwick is covered for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Our area takes in 48 places across East Lothian, large and small. Edinburgh is on our list too, around 29 miles away.
Postcode districts we cover here for bathroom resealing: EH42. You’ll find streets such as Back Lane, Manse View and Kirk Brae. We also cover the places around Innerwick: Broxburn (3 miles north-west), Spott (3 miles west), Cockburnspath (4 miles south-east), Dunbar (4 miles north-west) and Cove (4 miles east). We also work in nearby towns such as Haddington (13 miles west), North Berwick (13 miles north-west), Gullane (15 miles west) and East Linton (8 miles west).
Around Innerwick
The closest station to Innerwick is Dunbar station, roughly 3.8 miles north-west of the centre. A little further out are Innerwick Castle (0.9 miles east) and Belhaven Hospital (4.3 miles north-west). The countryside around Innerwick includes Doon Hill and Pease Dean.
How we quote for bathroom resealing
Every job gets its own quote. This is what makes a difference:
- Access and height
- The number of rooms or windows
- Which sealant suits the joint
- The old material and how stubborn it is
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Helping us quote
What to tell us when you ask for a quote:
- What’s wrong with the joints now
- Where the property is
- Any access issues, like height or stairs
- Any previous sealing or DIY work
For a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Why it’s worth doing now in Innerwick
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back, as long as the fittings themselves are sound. If something else is wrong, we’ll tell you. In an older home around Innerwick, damp from a failed joint can get into timber and plaster.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
Why book with us
- Sealant colour chosen to suit
- Over 20 years’ experience
- Rated 4.9 stars on Google
- We agree the colour with you first
See our cost guide or our reviews.
Honest limits
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Failed grout lines across the wall
- Tiles that have come away from the wall
- Water coming from the plumbing rather than the joint
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.
Joints and surfaces we work on
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Should I try it myself first?
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.