Isle of Wight · England
Bathroom & kitchen resealing in Hillway, Isle of Wight
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Hillway. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Two layers of silicone, both failing
- Water getting behind the bath panel
- A bead that has pulled away from the tiles
Your questions about bathroom resealing in Hillway
Will you come out to Hillway?
Yes, Hillway is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I let a flat near Brading station. Can you help?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before any work starts.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
What does bathroom resealing cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before we start.
Can you get rid of the black mould in my sealant?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
Can you reseal around my kitchen sink and worktop?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s usually around 24 hours. Using it sooner can damage the bead.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or send us an email.
How we handle bathroom resealing in Hillway
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We work on baths, kitchen worktops & upstands and wet rooms, and people most often call us about water getting behind the kitchen upstand and sealant that has split, shrunk or peeled away.
In a village or hamlet like Hillway, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
There’s a 12-month guarantee on every job.
- Place
- Hillway (PO35)
- Wider area
- Isle of Wight
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Common problems we fix in Hillway
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, and a tray that is not fully bedded can rock. Over time the joint tears or pulls away from the tile.
Signs it’s time to call us include:
- Shrunken sealant along the back of a worktop
- Water getting behind the bath panel
- Splits where the tray meets the wall
- A messy, uneven bead from a previous reseal
If you let a flat or house near Brading station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Questions to ask before booking
- The length of the guarantee
- Is the old sealant removed completely?
- Whether VAT is included
- What happens if the job turns out different
Bathroom resealing around Hillway
Hillway is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Bembridge Methodist Church include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as Bembridge Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Hillway is about 4 miles south-east of Ryde, in the Isle of Wight. We carry out bathroom resealing for homes and businesses in Hillway. Across the Isle of Wight, we cover 125 places, and Hillway is one of them. There’s also a page for Portsmouth, roughly 9 miles from Hillway.
Our applicators cover all of the PO35 postcode area for bathroom resealing. Bathroom resealing is available to properties on Hillway Road and Jenny Streets Lane. Close by, we work in Bembridge (1 mile north-east), Foreland Fields (1 mile north-east), St Helens (2 miles north-west), Gaskins (2 miles north-west) and Yaverland (2 miles south-west). Further out, we also cover Newport (9 miles west), Ryde (4 miles north-west), Cowes (11 miles north-west), Sandown (3 miles south-west), Shanklin (5 miles south-west) and Ventnor (7 miles south-west). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
Local landmarks in Hillway
We work in homes and buildings around The Propeller Inn and Bembridge School and the streets around them. Hillway’s nearest station is Brading station, roughly 1.8 miles west of the centre. Well-known places in the area include Sandown Castle (2.6 miles south-west) and Arthur Webster Memorial Hospital for Children (4.7 miles south-west). The countryside around Hillway includes Bembridge Down and Brading Marshes RSPB reserve.
Surface by surface
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A continuous bead along the back keeps water out, as long as the worktop itself is firmly fixed.
Sinks & splashbacks
The edge of an inset sink is a common place for water to get under the worktop. We reseal the visible edge of the sink where it has failed.
What affects the cost of bathroom resealing
Your quote is based on your job. We take into account:
- Access and height
- How much there is to do
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will explain what it covers.
Helping us quote
When you contact us, these details help:
- Any previous sealing or DIY work
- The address or postcode of the job
- How many joints, rooms or windows are involved
- The problem you’ve noticed
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or send us an email.
Aftercare tips
A little care helps the new joints last. We recommend:
- Don’t leave water standing on kitchen joints
- Keep the fan on for a while after bathing
- Look for lifting corners and small gaps now and then
- Wait for the cure time we give you
Don’t stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Small signs come before a leak: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.
Landlord and commercial work in Hillway
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
How it works
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen in most cases. Somewhere as small as Hillway, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Read more
Why it’s worth doing now in Hillway
Fresh sealant smartens a bathroom or kitchen with very little disruption, which helps when a home is being let or put on the market. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Where a wall is exposed, as many are in small places like Hillway, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
What it costs depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
Why Hillway clients choose us
- Tidy, careful work
- Sealant colour chosen to suit
- 20+ years of sealant experience
- 180+ five-star Google reviews
See our cost guide or what customers say.