Edinburgh · Scotland
Bathroom & kitchen resealing in Hillend, Edinburgh
Bath, shower, basin, wet room, worktop and sink resealing in Hillend, with a 12-month guarantee on every job. Call for a quick quote.
- Failed sealant on the screen profile
- A messy, uneven bead from a previous reseal
- Gaps between the worktop and the wall
How we handle bathroom resealing in Hillend
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the bead isn’t stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. If you’re dealing with sealant that has split, shrunk or peeled away and a messy, uneven bead from a previous reseal, we can put it right, on kitchen worktops & upstands, wet rooms and baths alike.
For a place like Hillend, the job is the same as anywhere: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
Our work is backed for twelve months, in Hillend and everywhere else we cover.
- Location
- Hillend (EH10)
- Wider area
- Edinburgh
- Cover
- A year, on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Hillend homes and their sealant
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. Edinburgh has a lot of tenement flats, in the Old and New Towns and well beyond, and in a tenement, a leaking seal can reach the neighbours below.
For landlords with property near Slateford station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. Schools such as Gracemount High School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you live in an older home near Fairmilehead Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Hillend is about 2 miles south-west of Southhouse, in Edinburgh. For bathroom resealing in and around Hillend, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We’re based in Crawley and cover Edinburgh, Hillend included. Hillend is one of 175 towns and villages in Edinburgh we cover.
Work in EH10 works the same way as everywhere else we cover. Bathroom resealing is available to properties on Pentland Road and Seafield Moor Road and the roads around them. We also cover the places around Hillend: Old Pentland (1 mile east), Bilston (1 mile south-east), Loanhead (2 miles east), Burdiehouse (2 miles north-east) and Roslin (2 miles south-east). Within a short drive, we also cover Edinburgh (4 miles north), Leith (7 miles north), Bonnington (6 miles north), Greenside (5 miles north), Broughton (5 miles north) and Bellevue (5 miles north).
Around Hillend
For rail, the closest station is Slateford station, about 3.3 miles north-west of the centre. A little further out are Cameron Toll Shopping Centre (3.1 miles north-east) and Princess Margaret Rose Orthopaedic Hospital (0.9 miles north). For a walk, there’s Duddingston Loch and Caerketton Hill.
What we cannot put right
We won’t take on work that won’t last, so here’s what sealant can’t put right:
- A tray or bath that is cracked through
- Tiles that have come away from the wall
- Cracked or missing grout between tiles (that is regrouting)
If you’re not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
What we seal
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
What we do, step by step
At the end, we look at the finished work together. The visit itself usually takes a morning or an afternoon for most single baths and showers, depending on the size of the job. Somewhere like Hillend may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Mention any parking rules near the property
- For indoor joints, keep the area dry beforehand if you can
- Keep children and pets away from the work area
Getting a quote
We quote each job on its own. Just send an email to info@mrmastic.co.uk with the details.
Read more
Quotes for bathroom resealing in Hillend
There’s no set price list, because jobs vary so much. The quote depends on:
- The type of sealant required
- How much there is to do
- Whether there’s mould to deal with
- When we can work, for business premises
The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before work begins.
What we need to know
Photos help, but a description is a good start. Please mention:
- Whether it has been sealed before
- The rough size of the job
- How we’d reach the joints
- The address or postcode of the job
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
FAQs for Hillend
Can you help a landlord with a rental near Slateford station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.
Do you cover smaller places like Hillend?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned.
Do you have insurance?
Yes. We’re fully insured for domestic and commercial work.
Where do you work from?
Mr Mastic is based in Crawley. Our applicators cover Hillend.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Can you do several jobs on one visit?
Yes. Just list everything you need.
What happens if it’s left?
The difference in a professional reseal is mostly what you do not see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early. Around Hillend, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why Hillend customers choose us
- White, clear, grey or another colour, product permitting
- One-year guarantee on every job
- We leave the area clean and tidy
- 20+ years of sealant experience
Take a look at our cost guide and customer reviews.
Places near Hillend
Other services in Hillend
Different surfaces, different methods
Basins & vanity units
On a basin, neatness shows: so we keep the line tidy and even, in white, clear or a colour to suit.
Kitchen worktops & upstands
Worktop joints get wet and wiped every day. The new bead is colour-matched where it shows.
How to look after the new joints
Aftercare is simple:
- Open a window or run the fan so the room dries
- Wipe up water along the back of the worktop
- Dry the bead with a towel now and then
- Don’t let bottles sit on the bead
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.