Orkney Islands · Scotland
Heddle Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Heddle. Fully insured, ARBOMaster approved and guaranteed for a year.
- A bead that has pulled away from the tiles
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
About our bathroom resealing in Heddle
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Heddle. We are fully insured ARBOMaster approved applicators, and the work comes with a 12-month guarantee. Typical jobs include gaps between the worktop and the wall and two layers of silicone, both failing, on shower trays & enclosures, baths and wet rooms.
A bathroom in a place like Heddle gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Heddle (KW17)
- Wider area
- Orkney Islands
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Common questions in Heddle
Is Heddle within the area you cover?
Yes, smaller places are covered as well as towns. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.
Is Heddle in your area for bathroom resealing?
Yes. We work across all of Scotland, and Heddle is part of that. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.
How do I get a quote for bathroom resealing in Heddle?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
How long does it take to reseal a bath or shower?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
Will it make a mess?
No. The area is protected while we work and cleaned up afterwards.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Do the sealants smell?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
When it isn’t the sealant
Before booking, it’s worth knowing the limits:
- A cracked shower tray or bath (that needs repair or replacement)
- Water coming from the plumbing rather than the joint
- Loose or hollow tiles, or failed tanking behind them
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before booking.
Where we work in Heddle
- Kitchen worktops & upstands
- Sinks & splashbacks
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
How to look after the new joints
Looking after new joints is easy:
- Keep the fan on for a while after bathing
- Wipe the sealant dry after showering
- Don’t let bottles sit on the bead
- Dry worktop joints after washing up
Wipe up standing water along the worktop joint and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. A reseal in time can save the worktop.
Why it’s worth doing now in Heddle
You do not need a new bathroom because the sealant looks bad. A new bead often brings the whole room back, as long as the fittings themselves are sound. If something else is wrong, we’ll tell you. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- One-year guarantee on every job
- Colour agreed with you before we start
- 180+ five-star Google reviews
- More than 20 years in sealant work
See how sealant jobs are priced and our reviews.
Heddle homes and their sealant
Heddle is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
For jobs in and around Heddle, choosing the right material for each joint is as important as a tidy finish.
Heddle is about 6 miles west of Kirkwall, in the Orkney Islands. Anywhere in KW17, we cover bathroom resealing for homes and businesses. Our area takes in 51 places across the Orkney Islands, large and small.
Postcode districts we cover here for bathroom resealing: KW17. If you’re just outside Heddle, we cover Finstown (1 mile north-east), Grimbister (1 mile east), Germiston (1 mile south-west), Grimeston (3 miles north-west) and Bimbister (3 miles north-west). If you are somewhere remote, the job takes a little more planning.
Around Heddle
Nearby you will also find Balfour Hospital (5.9 miles east). Open spaces near Heddle include Loch of Wasdale and Hill of Heddle.
Also in Heddle
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
How the job changes by surface
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Kitchen worktops & upstands
Upstands and back edges are cut out, cleaned of grease and resealed, since cooking leaves a film that stops silicone sticking. The extra cleaning is what makes the bead last.
When to call us in Heddle
Mould is the reason many people want their sealant replaced. Bathrooms without good ventilation give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
Any of these means the joints need attention:
- A reseal done over the top of the old bead
- Leaking joints on a shower screen
- Damp behind the bath or under the tray
- Gaps where the bath or tray has moved
In and around Heddle, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Comparing quotes
- How long to leave it before use
- Whether they’re fully insured
- Whether you can choose the colour
- Who does the work, and how experienced they are
How the visit works
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take around two hours for one bath or shower, longer for a whole bathroom. For a place like Heddle, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We protect the area and cut out all of the old sealant.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Let us know about parking restrictions
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
Getting a quote
We do not publish a price list, because every job is different. Instead, we send you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.