Kent · England

Bathroom Resealing in Bloodden

Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Bloodden and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Water escaping at the shower enclosure
  • Damp behind the bath or under the tray
  • A bead that has pulled away from the tiles

Need bathroom resealing in Bloodden?

How we handle bathroom resealing in Bloodden

Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. A photo of the joints helps when you phone 0345 464 0079 or send us an email, and you will get a clear quote before any work starts. We work on baths, kitchen worktops & upstands and sinks & splashbacks, and common reasons people get in touch are shrunken sealant along the back of a worktop and leaks into the floor or ceiling below.

For a small place like Bloodden, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.

Big or small, you get the same one-year guarantee in Bloodden and across Kent.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Place
Bloodden (CT3)
Wider area
Kent
Cover
One year on every job
Quote
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026

The process

There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the job takes a morning or an afternoon for most single baths and showers for a typical job. In a small place like Bloodden, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We cover the area around the joints we are working on.
  2. We cut away the old sealant and clean off what’s left.
  3. We treat any mould and let the joint dry properly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. The joint is finished neatly and we explain when it can get wet.

Before we arrive

  • Tell us about any water getting in
  • Let us know about parking restrictions
  • Tell us about any previous sealing or DIY attempts

Getting a quote

Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.

Ask for a quote

Read more

Do you need bathroom resealing in Bloodden?

Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.

The problems people normally mention when they call are:

  • Cracked, shrunken or lifting silicone
  • Water getting behind the kitchen upstand
  • A joint torn by a bath that flexes
  • Leaking joints on a shower screen

For landlords with property near Adisham station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

What to look for in a quote

  • The length of the guarantee
  • Is the old sealant removed completely?
  • Is VAT in the price?
  • What preparation is included

How to choose a mastic man

Aftercare tips

To keep the joints looking good and working properly:

  • Open a window or run the fan so the room dries
  • Keep bottles off the sealant line
  • Keep scourers and sharp tools away from the bead
  • Dry worktop joints after washing up

Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.

Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.

How the job changes by surface

Kitchen worktops & upstands

Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.

Sinks & splashbacks

Next to the sink, the sealant has to cope with constant water, and a food-safe product where it’s needed. The joint is laid neatly so it’s easy to wipe.

What affects the quote in Bloodden

We don’t publish a price list, because no two jobs are the same. What we look at:

  • When we can work, for business premises
  • The type of sealant required
  • How many areas need sealing
  • Whether the work is at height

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email.

Helping us quote

To make quoting easier, please include:

  • Pictures of the joints, sent by email
  • Whether it has been sealed before
  • Where the property is
  • The rough size of the job

For bathroom resealing in Bloodden, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before we start.

FAQs for Bloodden

Will you come out to Bloodden?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

I let a flat near Adisham station. Can you help?

Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.

What should I tell you?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

Do you hold any approvals?

Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.

Do I have to be there?

That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.

Where are you based?

We are based in Crawley, and we work across South East England, London and Scotland.

Do you do kitchens as well as bathrooms?

Yes. Where it’s needed by the sink, we use a food-safe sealant.

What do you put in the joint?

The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.

Landlords, agents and businesses in Bloodden

We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.

Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.

Bathrooms and kitchens in Bloodden

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

Homes close to Church of the Holy Innocents include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. For site and facilities teams at buildings such as Adisham Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Bloodden is about 6 miles south-east of Canterbury, in Kent. For bathroom resealing in and around Bloodden, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We’re based in Crawley and cover Kent, Bloodden included. Bloodden is one of 922 towns and villages in Kent where we work for bathroom resealing. Our Chelmsford page covers work nearby (46 miles or so).

Jobs for bathroom resealing in CT3 is quoted and booked the same way as anywhere else. Close by, we work in Adisham (1 mile north-west), Aylesham (1 mile south), Bramling (2 miles north), Bekesbourne (2 miles north-west) and Womenswold (2 miles south). Within a short drive, we also cover Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (11 miles south), Ramsgate (12 miles north-east) and Broadstairs (13 miles north-east).

Around Bloodden

There’s a railway station in Bloodden itself: Adisham station. Nearby you will also find St Martins Hospital (4.5 miles north-west).

Map of Bloodden © OpenStreetMap contributors

Should I try it myself first?

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job