East Lothian · Scotland

Bathroom & kitchen resealing in Bara, East Lothian

Baths, showers and worktops in Bara need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.

  • Two layers of silicone, both failing
  • Splits where the tray meets the wall
  • Water escaping at the shower enclosure

Trusted bathroom resealing in Bara

Why it’s worth doing now in Bara

A quick bead over the top of the old one might look better for a while, but it cannot stick to what’s underneath. Water creeps under it and mould follows, and the next reseal means two layers to cut out. In a place like Bara, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.

We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.

Why book with us

  • A sealant colour to suit the surroundings
  • Old sealant always removed completely
  • Trusted Arbo and Everbuild sealants
  • Full insurance on every job

Take a look at what affects the cost or what customers say.

Bathroom resealing for homes and businesses in Bara

A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. They’re resealed with anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We are often asked to deal with splits where the tray meets the wall and two layers of silicone, both failing, across sinks & splashbacks, shower trays & enclosures and kitchen worktops & upstands.

In and around a place like Bara, homes range from older stone-built properties to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.

A 12-month guarantee comes as standard.

Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall
Where
Bara (EH41)
Wider area
East Lothian
Cover
A year, on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026

Your questions about bathroom resealing in Bara

Is Bara in your area for bathroom resealing?

Yes, Bara is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.

Do you cover smaller places like Bara?

Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

How long does it take to reseal a bath or shower?

It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.

Do you do kitchens as well as bathrooms?

Yes. Kitchen joints get extra degreasing before the new bead goes on, then we reseal in a colour to suit.

Do you have insurance?

Yes. We are fully insured, and we have been doing sealant work for more than 20 years.

Can tenants book the work?

Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.

Will there be a smell?

There can be a smell while the sealant cures. Opening a window helps.

What sealant do you use?

Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.

Signs you need bathroom resealing in Bara

Black mould is behind a lot of resealing. Steamy rooms that do not dry out keep the silicone damp for hours, and mould that has grown into the silicone generally will not clean off.

It’s worth asking for a quote if you see:

  • Mouldy sealant that has gone black
  • A reseal done over the top of the old bead
  • Lumpy, uneven sealant from a DIY attempt
  • Leaks into the floor or ceiling below

Around Bara, as everywhere, bathroom resealing is only as good as the preparation behind it.

Comparing quotes

  • Whether they’re fully insured
  • How long to leave it before use
  • Is the old sealant removed completely?
  • Is VAT in the price?

Choosing a sealant specialist

Landlords, agents and businesses in Bara

For anyone letting property in or around Bara, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

Bathrooms and kitchens in Bara

Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.

For landlords with property near East Linton station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.

Bara is about 4 miles south-east of Haddington, in East Lothian. Jobs in Bara get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. 48 places in East Lothian are on our list. Our Edinburgh page covers work nearby (20 miles or so).

Every address in EH41 is within our area for bathroom resealing, from the main roads to the quietest streets. Neighbouring places we cover for bathroom resealing include Garvald (2 miles north-east), Stenton (5 miles north-east), East Linton (5 miles north), Phantassie (5 miles north) and Preston (6 miles north). Larger places within reach include Musselburgh (14 miles west), Haddington (4 miles north-west), Dunbar (9 miles north-east), Tranent (10 miles west), North Berwick (10 miles north) and Prestonpans (11 miles west).

Near you in Bara

For rail, the closest station is East Linton station, roughly 5 miles north of the centre. Nearby you’ll also find Lamp of Lothian Collegiate Centre (3.7 miles north-west) and Yester Castle (2 miles south). For a walk, there’s Traprain Law.

Map of Bara © OpenStreetMap contributors

DIY sealant or a professional job?

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.

How we quote for bathroom resealing

The quote reflects the job in front of us. We take into account:

  • The amount of work
  • Working hours on commercial sites
  • Mould in or behind the old joints
  • The number of rooms or windows

Doing several joints on one visit usually makes better use of the time than several visits. You will get one clear quote for the whole job.

Asking for a quote

When you call or email, these details help:

  • The type of property
  • What’s wrong with the joints now
  • Pictures of the joints, sent by email
  • Any access issues, like height or stairs

Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.

What we do, step by step

On the day, we start by going over the job with you, so there are no surprises. We protect the surfaces around the joints before any work starts. Most jobs take a couple of hours for a single bath or shower. Around Bara, distance and access matter more than parking. Tell us how to find the property and how to reach the work.

  1. Protection goes down around the bath, shower or worktop.
  2. We cut away the old sealant and clean off what’s left.
  3. Mould is treated, then the joint is left to dry thoroughly.
  4. Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
  5. We finish the joint, clear up and tell you how long to leave it before it gets wet.

Before we arrive

  • Clear items away from the joints we’re working on
  • Where the joints are inside, avoid wetting them before we arrive
  • On commercial sites, let us know about site rules

How to get a quote

Need a quote? Please send an email to info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.

Get a quick quote

Advice

What sealant work can’t fix

It helps to know what we cannot do:

  • Cracked or missing grout between tiles (that’s regrouting)
  • Loose or hollow tiles, or failed tanking behind them
  • A cracked shower tray or bath (that needs repair or replacement)

If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think.

Where we work in Bara

  • Shower trays & enclosures
  • Baths
  • Sinks & splashbacks
  • Wet rooms
  • Kitchen worktops & upstands
  • Basins & vanity units
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job