Argyll and Bute · Scotland
Window & door mastic in Salen, Argyll and Bute
Professional window mastic in and around Salen, with every bit of old sealant taken out first.
- Cold air getting in at the frame edge
- Cracked internal joints between frame and plaster
- A bead that does not match the frame
Window mastic in Salen, done properly
Behind a thin line of old mastic there’s sometimes a deep void. Filling it with sealant alone leaves a joint that cannot move properly, so deep gaps get backing rod first. That way the new bead bonds to the frame and the wall only. Typical jobs include gaps where the sill meets the wall and cracked internal joints between frame and plaster, on uPVC windows, timber windows & doors and patio & French doors.
In and around a place like Salen, homes range from older stone-built cottages to newer houses. Exposed frames and sills take the full force of wind-driven rain.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Salen (PA72)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Why deal with it now?
Choosing the product is half the job. Decorators’ caulk and bathroom silicone aren’t designed for outside joints that move. An exterior, low-modulus sealant stays flexible in sun and frost. Around Salen, water from a failed joint in an older stone home can soak into timber and plaster.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why book with us
- Full insurance on every job
- A choice of colours where the product allows
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
See our cost guide or customer reviews.
What else we do in Salen
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Don’t use solvent cleaners on the joint
- Keep drainage slots and sill grooves clear
- Repaint timber before it’s bare
- Avoid blasting the frames with a pressure washer
Have a look at the joints once a year, ideally after winter. Cracks and lifting edges are easy to spot early, and if anything looks wrong, just send an email to info@mrmastic.co.uk.
Wet, windy weather is when failed mastic shows itself, but resealing works best in dry conditions. Sorting cracked mastic early means the joint is sound before the bad weather.
How the visit works
Good joint work is mostly preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes most of a day for a typical house, less for a few frames. For a place like Salen, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by checking each window and door with you.
- Next the failed sealant is cut away and the joint cleaned.
- Deep gaps are filled with backing rod to set the depth.
- We apply a weatherproof sealant to match the frame and tool it neatly.
- Every joint is checked before we leave.
How to prepare
- Clear the area around the work
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
Get a quote
Need a quote? Please send an email to info@mrmastic.co.uk with a few details. We’ll explain what we’d do and send you a clear quote before we start.
Related advice
Windows and doors in Salen
Salen is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on the mastic around window and door frames, especially on the side facing the sea. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Around Salen, as everywhere, window mastic is only as good as the preparation behind it. Whether the job is in Salen itself or nearby, the right material for each joint matters as much as a neat finish.
Salen is in Argyll and Bute. From the centre of Salen to the outskirts, we cover window mastic for every kind of property. 118 places in Argyll and Bute are on our list, from the larger towns to small villages. We also work in Glasgow, around 79 miles away.
Here we cover the PA72 postcode area for window mastic. That includes homes and businesses on Jarvisfield Road, Jarvisfield Place and Dunaros Gardens and the roads around them. Neighbouring places we cover for window mastic include Lochaline (7 miles east), Baliscate (8 miles north-west), Ballygown (9 miles west), Tobermory (9 miles north-west) and Craignure (9 miles east). If you’re somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
What’s near Salen
A little further out are Aros Castle (1.3 miles north-west). For a walk, there’s Cruach Tòrr an Lochain and Loch na Dàiridh.
Salen: your questions answered
Is Salen in your area for window mastic?
Yes, Salen is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Does living near the coast affect window mastic in Salen?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are normally the first to need attention.
Is there any odour?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
Is the new sealant paintable?
Silicone generally will not take paint. Let us know beforehand, and we will use a paintable product where it suits.
What does window mastic cost?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. Then drop us a line at info@mrmastic.co.uk.
Do you work for landlords and businesses?
Yes. Domestic, commercial and hotel work are all part of what we do.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
When it is not the sealant
It helps to know what we cannot do too:
- Worn gaskets, brush seals or a door that has dropped
- Rotten timber, which needs a joiner first
- Damp problems in the wall away from the window
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Where we work in Salen
- Composite doors
- uPVC windows
- Aluminium frames
- Patio & French doors
- Window sills
- Timber windows & doors
Surface by surface
uPVC windows
Plastic frames move a lot between a hot afternoon and a cold night, so we use a flexible, low-modulus sealant. We match white, brown, anthracite grey and black frames.
Aluminium frames
Bi-fold and sliding aluminium doors have long frame joints, and the threshold joint takes a lot of water. We prepare and reseal every joint, backing the deep ones.
Quotes for window mastic in Salen
You will get a clear quote before we start. It’s based on:
- The type of sealant required
- The number and length of the joints
- How many rooms, windows or areas are involved
- How easy the joints are to reach
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- A few pictures by email, if you can
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
- Any access issues, like height or stairs
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.