Argyll and Bute · Scotland
New Build Mastic in Salen
New build mastic for Salen and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Second-fix sealing on new plots
- Worktop and upstand sealant coming away
- Untidy sealant flagged on a snagging list
Surface by surface
Windows and doors
Internal joints between frames and plaster often crack as a new house dries. We remove cracked sealant and apply a flexible one that suits the frame.
Show homes
Show homes need sealant that looks right from day one. Every bead is neat and coloured to suit the room.
About our new build mastic in Salen
Snagging sealant properly means taking the failed bead out completely. New silicone won’t bond to old silicone, so it all comes out before we clean, dry and reseal. Typical jobs include smeared, uneven beads picked up at snagging and second-fix sealing on new plots, on skirting & floors, show homes and kitchens.
Around smaller Scottish places like Salen, new homes tend to be single plots or small developments. They need their sealant and floor joints finished just as carefully as on a big site.
Each job carries a 12-month guarantee.
- Location
- Salen (PA72)
- Wider area
- Argyll and Bute
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
How it works
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a few hours for most snagging lists, longer for a run of plots, including the tidy-up. Somewhere like Salen may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We start by going through the snagging items or plot schedule with you.
- The failed sealant is removed completely, with no layer left behind.
- Joints are vacuumed and cleaned of building dust.
- We prime where needed and apply a sealant suited to each joint.
- We tool every joint neatly and tell you when each area can be used.
How to prepare
- Try not to wet indoor joints just before the visit
- Keep pets and children clear of the area while we work
- Tell us if parking is tricky
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand.
Advice
What we can’t put right
Sealant is not the answer to every problem, and we will tell you before work begins. Sealant will not put right:
- Cracking that points to a structural problem
- Baths and trays that move too much for sealant to cope with
- Plumbing faults behind the sealant
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Plot handovers
- Kitchens
- Bathrooms & en suites
- Skirting & floors
- Show homes
- Windows & doors
More services for Salen
How we quote for new build mastic
For a quick quote, just ask. The main things that affect it are:
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- How many rooms, windows or areas are involved
- How much there is to do
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Helping us quote
You do not need to know the technical terms. Just tell us:
- Whether it has been sealed before
- How many joints, rooms or windows are involved
- Photos by email, if that’s easy
- How we’d reach the joints
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, email us at info@mrmastic.co.uk.
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Do not seal over failed sealant yourself
- Clean sealant with mild detergent, not abrasives
- Use the extractor fan every time you shower
- Check bath and shower seals every few months as the house settles
Leave the sealant for the cure time we give you before showering or bathing. Silicone is usually left for about a day before water reaches them.
The sooner you deal with untidy or cracking sealant, the less there is to put right. Left alone, a small crack can become a leak in a busy bathroom.
Landlords, agents and businesses in Salen
Letting agents and landlords in Salen can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Questions from Salen
Is there a guarantee on new build mastic in Salen?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Will you come out to Salen?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Can new sealant go on top of the old bead?
No. We always remove the existing bead, the joint cleaned and primed where needed, and a new bead applied.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
How long does new build mastic take?
Typically it takes anything from a few hours to several days, depending on the number of plots. Larger jobs naturally take longer, and we’ll say how long yours will take.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Joints and finishes in Salen homes
Salen is within about 1 mile of the coast. New homes near the sea put their outside mastic to work from day one, so it’s worth checking at snagging. Salen is in the west of Scotland, which is wetter than the east, which means plot mastic and the sealant in new homes has to cope with a lot of rain.
For jobs in and around Salen, choosing the right material for each joint is as important as a tidy finish. Around Salen, as everywhere, new build mastic is only as good as the preparation behind it.
Salen is in Argyll and Bute. We provide new build mastic to homes and businesses in Salen and nearby, as part of our work across Argyll and Bute. Across Argyll and Bute, we cover 118 places, and Salen is one of them. We also work in Glasgow, about 79 miles from Salen.
Jobs for new build mastic in PA72 works the same way as everywhere else we cover. Whether your property is on Jarvisfield Road, Jarvisfield Place and Dunaros Gardens or anywhere close by, we can help. We also cover Lochaline (7 miles east), Baliscate (8 miles north-west), Ballygown (9 miles west), Tobermory (9 miles north-west) and Craignure (9 miles east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Local landmarks in Salen
Other landmarks nearby include Aros Castle (1.3 miles north-west). For a walk, there’s Cruach Tòrr an Lochain and Loch na Dàiridh.