Glasgow · Scotland
Sand mastic for sash & case windows in Parkhead, Glasgow
Traditional burnt sand mastic around sash and case windows and doors in stone and brick in Parkhead, with a one-year guarantee on every job. Call for a quick quote.
- A silicone bead on a sash window that spoils the look
- Tired mastic found when preparing windows for paint
- Gaps where the frame meets the masonry
Common questions in Parkhead
I let a flat near Carntyne station. Can you help?
Yes. We work for landlords and agents as well as householders. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Do you cover Parkhead for sand mastic?
Yes. Our work covers the whole of Scotland, and Parkhead is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Can new sealant go over the old?
No. New silicone won’t bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Is it possible to take out silicone and use sand mastic instead?
Yes. The silicone is cut out and the joint cleaned, then point it with sand mastic.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Where is Mr Mastic based?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Sand mastic in Parkhead, done properly
Traditional burnt sand mastic blends with stone and brick surrounds. It’s a good fit for period properties where a modern sealant bead would stand out. We’re often asked to deal with draughts and rain around sash boxes and old cement repairs round a window that have failed, on stone surrounds, timber door frames and tenement windows.
Older stone-built tenements in Scotland’s cities were built with sash and case windows, though many have since been replaced. Whether you are in a tenement flat or a house in Parkhead, the joint between frame and wall is what keeps the weather out.
There’s a 12-month guarantee on every job, large or small.
- Place
- Parkhead (G31, G32, G40)
- Region
- Glasgow
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we do, step by step
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours for a single window, longer for several. For a tenement in Parkhead, work inside your flat is between us and you, while shared parts may need the factor or neighbours to agree. It helps to know which it is when you get in touch.
- First, we look at the surrounds with you and agree what needs doing.
- We rake out the old mastic and clean the joint.
- We pack any deep gaps so the mastic sits at the right depth.
- Sand mastic is mixed and applied by hand, then shaped to the joint.
- The mastic is finished to sit tidily against the stone or brick.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Move anything stored near the joints
- Mention if the joints have been sealed before
How to get a quote
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. We will give you a clear quote before any work starts.
Advice
When something else is needed
It helps to know what we cannot do too:
- Sashes that need overhauling
- Masonry that needs repairing
- Decisions on consent for listed homes
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
What we seal
- Tenement windows
- Stone surrounds
- Timber door frames
- Period & listed homes
- Brick reveals
- Sash and case windows
What affects the quote in Parkhead
Every job gets its own quote. These are the things that affect it:
- When we can work, for business premises
- How easy the joints are to reach
- The number and length of the joints
- How many areas need sealing
What you pay reflects the work, not guesswork. That’s why we ask about the job first and give you a clear quote before work begins.
Helping us quote
When you call or email, it’s useful to know:
- How we’d reach the joints
- Any previous sealing or DIY work
- Where the job is, and your postcode
- Roughly how big the job is
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
What the job involves on each surface
Tenement and terrace windows
Where a building is shared, window work may involve neighbours, so check who is responsible first.
Timber door frames
Doors face weather and wear, so their mastic can fail sooner. We rake it out and renew it.
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Towns and villages near Parkhead
Other services in Parkhead
Sand mastic in Parkhead: local notes
The west of Scotland is wetter than the east, so there’s plenty of rain for the mastic around older windows and doors to keep out. Historic houses like Provand's Lordship (about 1.8 miles north-west) are a reminder that the area around Parkhead has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.
Managing a site like St Mungo's Academy? Then its window and door frames need their mastic kept sound, just like a home’s. If you let a flat or house near Carntyne station, older sash windows in a rental need their mastic kept sound to keep the weather out. Provand's Lordship, about 1.8 miles north-west, is one of the historic houses in the wider area around Parkhead, and older homes nearby need a sealant that suits their walls.
Parkhead is about 3 miles north-west of Cambuslang, in Glasgow. If you need sand mastic in Parkhead, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We cover Glasgow from our Crawley base. Our Glasgow coverage runs to 183 places, Parkhead among them.
Jobs for sand mastic in G31, G32 and G40 is quoted and booked the same way as anywhere else. You will find streets such as Perth Lane, Delhi Lane and London Road, all of which we cover. If you’re just outside Parkhead, we cover Lilybank (1 mile south-east), Carntyne (1 mile north-east), Shettleston (1 mile east), Tollcross (1 mile east) and Auchenshuggle (1 mile south-east). Larger places within reach include Glasgow (3 miles west), Hillhead (4 miles north-west), Dowanhill (4 miles north-west), Woodlands (3 miles north-west), Woodside (3 miles north-west) and North Kelvinside (4 miles north-west).
Local landmarks in Parkhead
Typical jobs here are in homes near St Andrew's Secondary School and Parkhead Library. The closest station to Parkhead is Carntyne station, roughly 0.8 miles north-east. A little further out are Farme Castle (1 mile south) and Belvidere Hospital (less than half a mile south). Green spaces nearby include Hogganfield Loch and Cathkin Braes.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured.
For anyone letting property in or around Parkhead, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Avoid heavy scraping on the mastic joint
- Avoid patching sand mastic with silicone
- Make sure water runs off the sill
- Renew mastic before redecorating the windows
When preparing windows for paint, take care around the mastic. It can be damaged by heavy scraping.
It’s best to renew mastic before painting the windows. Painting over failed mastic hides the problem for a while.