Hampshire · England
Woolmer Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for householders, landlords and businesses in Woolmer. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Torn expansion joints
- Decorators’ caulk around a bath or shower
- Thick, messy sealant smeared over tiles
How we handle remedial sealant in Woolmer
In Woolmer, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. We strip each one back and start from scratch. We work on shrunken worktop sealant, mouldy bath & shower sealant and botched or over-sealed joints, and people most often call us about caulk or the wrong sealant used in a wet area and movement joints that have split or pulled away.
In a village or hamlet like Woolmer, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.
- Location
- Woolmer (GU33)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Places near Woolmer
More services for Woolmer
When to call us in Woolmer
Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, and the sealant lifts or goes mouldy from underneath.
The most common problems we see are:
- Torn expansion joints
- A shower that leaks however often it’s resealed
- Caulk or the wrong sealant used in a wet area
- Black mould underneath the bead
Schools such as St Matthew's Church of England Aided Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before booking anyone
- How long the guarantee is
- Whether they’re fully insured
- What the cure time is
- What happens if the job turns out different
How the visit works
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the job takes a few hours for most joints, depending on how much old sealant has to come out in most cases. In a small place like Woolmer, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the joint for movement, leaks and the reason it failed.
- We strip the joint completely, removing any layers below.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
How to prepare
- Mention any parking rules near the property
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about any previous sealing or DIY attempts
Get a quote
We quote each job on its own. Simply call 0345 464 0079 or drop us an email and describe the job.
Related advice
When it isn’t the sealant
We’d rather tell you now than do work that won’t last, so these are the limits:
- Water damage behind tiles that needs a tiler
- Sealant in an older building that needs testing for asbestos first
- A tray or worktop that needs refixing first
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
What we seal
- Botched or over-sealed joints
- Failed movement joints
- Expansion joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
Leave it or put it right?
Spraying mould remover on a sealed-over joint does not reach what’s underneath. Removal is the only way to get at it, and the joint treated and dried before resealing. In a small place like Woolmer, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Why Woolmer clients choose us
- Rated 4.9 stars on Google
- 20+ years of sealant experience
- White, clear, grey or coloured to suit, where the product allows
- Colour picked to suit the job
Read our cost guide or customer reviews.
What remedial sealant looks like in Woolmer
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as St Matthew's Church, older homes can move a little, which is hard on rigid grout and tired sealant. If you let a flat or house near Liss station, a joint that keeps failing is best fixed properly while the property is empty.
Woolmer is about 2 miles south of Bordon, in Hampshire. Jobs in Woolmer get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Woolmer is one of 683 towns and villages in Hampshire where we work. There’s also a page for Portsmouth, about 21 miles away.
Work in GU33 is quoted and booked the same way as anywhere else. Streets in the area include Benhams Lane and Petersfield Road, all of which we cover. Neighbouring places we cover for remedial sealant include Greatham (1 mile south), Blackmoor (1 mile north-west), Longmoor (1 mile south-east), Weavers Down (2 miles east) and Liss Forest (2 miles south). We also work in nearby towns such as Farnborough (15 miles north), Fleet (13 miles north), Horndean (13 miles south-west), Aldershot (12 miles north-east), Alton (6 miles north-west) and Waterlooville (15 miles south-west).
What’s near Woolmer
Around Woolmer, our work takes us to homes and buildings near Mill Chase Academy, among other places. The closest station to Woolmer is Liss station, about 2.8 miles south. A little further out are Chase Community Hospital (1.7 miles north-east) and The Romany Museum (2.8 miles west). The countryside around Woolmer includes Deadwater Valley and Selborne Hill.
What affects the quote in Woolmer
You’ll get a clear quote before we start. It’s based on:
- The product the joint needs
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
What you pay reflects the work, not guesswork. That’s why we ask a few questions first.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- What’s wrong with the joints now
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- Photos by email, if that’s easy
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved.
Common questions in Woolmer
Can you help a landlord with a rental near Liss station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Is Woolmer within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Can failed expansion joints be resealed?
Yes. Backing sets the depth and stops the sealant sticking to the back, which lets it stretch.
What if the leak isn’t the sealant?
Then we explain what we’ve found. A plumber or fitter may be needed before any new sealant goes on.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Clean sealant with mild products only
- Never seal over old silicone
- Check trays and worktops do not move
- Find out why the sealant failed first
Do not let anyone seal over it later. New silicone doesn’t bond to old.
If a joint has failed more than once, stop resealing it. Have someone find out why, otherwise the next attempt will fail too.