Hampshire · England
Weavers Down Remedial Sealant
Specialist remedial sealant for Weavers Down: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Wide, uneven beads that look worse than the old ones
- Kitchen joints letting water behind the worktop
- Caulk or the wrong sealant used in a wet area
Remedial sealant in Weavers Down, done properly
A movement joint stops working when its sealant splits or sets hard. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. Common call-outs are for caulk or the wrong sealant used in a wet area and mould trapped under a layer of silicone, across leaking tray & enclosure joints, mouldy bath & shower sealant and shrunken worktop sealant.
Somewhere as small as Weavers Down, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Whatever the size of the job, you get the same one-year guarantee in Weavers Down and across Hampshire.
- Location
- Weavers Down (GU30)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What happens on the day
At the end, we look at the finished work together. The visit itself normally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the amount of work. Somewhere like Weavers Down needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- The new joint is tooled neatly and we explain anything else we found.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Where the joints are inside, avoid wetting them before we arrive
- Mention if the joints have been sealed before
How to get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.
Related advice
Honest limits
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Movement from fittings that aren’t supported
- Failed tanking or loose tiles behind the sealant
- Cracks in the fitting rather than the joint
If in doubt, phone 0345 464 0079 or email us and we will say what we think before you book.
What we seal
- Expansion joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Botched or over-sealed joints
- Failed movement joints
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Bathrooms and kitchens in Weavers Down
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings. Weavers Down has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Rented homes near Liphook station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. Managing a site like Liphook Church of England Controlled Junior School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Weavers Down is about 7 miles north-east of Petersfield, in Hampshire. If you need remedial sealant in Weavers Down, please call 0345 464 0079 or send us an email for a quick quote. We cover Hampshire from our Crawley base. We cover 683 towns and villages across Hampshire, from the larger towns to small villages. For nearby work, see our Portsmouth page, about 21 miles away.
Postcode districts we cover here for remedial sealant: GU30. If you need remedial sealant at a property on Bircholt Road, Longmoor Drive and Beechcroft Close or a nearby road, our applicators can take on the job. We also cover the places around Weavers Down: Conford (1 mile north), Passfield (1 mile north), Liphook (1 mile east), Longmoor (2 miles west) and Woolmer (2 miles west). Within a short drive, we also cover Farnborough (15 miles north), Fleet (14 miles north), Horndean (14 miles south-west), Aldershot (12 miles north), Alton (8 miles north-west) and Petersfield (7 miles south-west).
Landmarks near Weavers Down
We work in homes and buildings around Bohunt School. For rail, the closest station is Liphook station, about 1.5 miles east of the centre. Well-known places in the area include Chase Community Hospital (2.3 miles north-west). For a walk, there’s Wheeler's Down and Deadwater Valley.
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Keep bleach and abrasives off the bead
- Always have old sealant cut out, not covered
- Find out why the sealant failed first
- Check ceilings under showers for marks
Keep an eye on the joint at first, especially if movement was the problem. Should anything change, call 0345 464 0079 or send us an email.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into whatever is behind or below. Sorting it early limits the damage.
What happens if it’s left?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we’ll tell you. In a small place like Weavers Down, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Why us?
- 12-month guarantee on every job
- Arbo and Everbuild products
- ARBOMaster approved applicator
- Rated 4.9 stars on Google
Read what affects the cost and customer reviews.
Also in Weavers Down
What affects the cost of remedial sealant
There’s no set price list, because jobs vary so much. What we look at:
- Any working-time requirements on site
- Which sealant suits the joint
- How much there is to do
- Any mould that needs treating
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Helping us quote
What to tell us when you ask for a quote:
- The problem you’ve noticed
- Whether it’s a home or a business
- If someone has resealed it before
- Photos by email, if that’s easy
Want a quote for remedial sealant? Please ring 0345 464 0079 or send us an email with a few details. We will explain what we’d do and give you a clear quote before work begins.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Weavers Down and across Hampshire. Several sites can be quoted together, and we’re fully insured.
For anyone letting property in or around Weavers Down, several properties can be quoted together. Send us the addresses and the work at each.
Weavers Down: your questions answered
Will you come out to Weavers Down?
Yes, Weavers Down is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you take on hotel work around Weavers Down?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Does remedial work come with a guarantee?
Yes, for 12 months. Where we’ve flagged another fault, it needs fixing for the joint to last.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
What if resealing will not fix my leak?
We will tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing won’t fix it, and we will not reseal for the sake of it.
Can you strip sealant from an acrylic tray safely?
Yes. We avoid heavy scraping and use the right cleaner for each surface.