Hampshire · England
Remedial sealant & repairs in Passfield, Hampshire
Problem with your failed sealant joints in Passfield? We cut out the old, prepare the joints and apply the right sealant.
- Kitchen joints letting water behind the worktop
- Wide, uneven beads that look worse than the old ones
- Beads that never stuck properly
About our remedial sealant in Passfield
Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, before resealing with a flexible product suited to the movement. If you are dealing with movement joints that have split or pulled away and worktop sealant that has shrunk and split, we can put it right, whatever the surface.
Being in a small place like Passfield makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
There’s a 12-month guarantee on every job, large or small.
- Place
- Passfield (GU30)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Common questions in Passfield
Do you cover Passfield for remedial sealant?
Yes. We work across London and the South East, and Passfield is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Do you work for landlords with property near Liphook station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. You can ring 0345 464 0079 or email us with the details for a clear quote.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we are using and why.
Do you offer different sealant colours?
We help you choose a colour that suits. The product needed can limit the range.
Do you have insurance?
Yes. We are fully insured.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Passfield homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Liphook station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Passfield is about 7 miles south-east of Alton, in Hampshire. From the centre of Passfield to the outskirts, remedial sealant is available for homes and businesses alike. Our Hampshire coverage runs to 683 places, and Passfield is one of them. Portsmouth is on our list too, about 23 miles from Passfield.
Every address in GU30 is within our area for remedial sealant, from the main roads to the quietest streets. If you need remedial sealant at a property on The Lyndons, Eleanor Close and Lynchborough Road or a nearby road, we can help. We also cover the places around Passfield: Conford (1 mile south-east), Weavers Down (1 mile south), Liphook (2 miles south-east), Woolmer (2 miles south-west) and Longmoor (2 miles south-west). Within a short drive, we also cover Farnborough (14 miles north), Fleet (12 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (7 miles north-west) and Petersfield (8 miles south-west).
What’s near Passfield
For rail, the closest station is Liphook station, about 2.3 miles south-east of the centre. Other landmarks nearby include Chase Community Hospital (1.5 miles north-west). Not far away are Deadwater Valley and Wheeler's Down.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
More services for Passfield
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
What we can’t put right
It helps to know what we can’t do too:
- A tray or bath that is cracked
- Movement from fittings that are not supported
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think before you book.
Surfaces we seal
- Expansion joints
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
What affects the cost of remedial sealant
We quote each job individually. These are the things that affect it:
- Which sealant suits the joint
- How easy the joints are to reach
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Any previous sealing or DIY work
- Where the job is, and your postcode
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.
How it works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. For a village or hamlet like Passfield, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
Before we arrive
- Clear items away from the joints we are working on
- Tell us about access, such as stairs, a lift or high-level joints
- Try not to wet indoor joints just before the visit
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or email us.
Read more
What we are called out for in Passfield
Some joints fail because water is reaching them from behind. A leaking valve, a failed waste or cracked grout feeds water behind the bead, and the sealant lifts or goes mouldy from underneath.
Any of these means the joints need attention:
- Gaps opening along the back of the worktop
- Floor or wall movement joints that have failed
- Thick, messy sealant smeared over tiles
- Repeat leaks from the same joint
If you look after a building such as Mill Chase Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before booking
- Whether VAT is included
- How the colour is chosen
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
How to look after the new joints
So the new joints stay in good condition:
- Ask why a joint failed before redoing it
- Keep bleach and abrasives off the bead
- Keep movement joints clear of mortar and paint
- Have loose fittings fixed before resealing
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Do not keep resealing the same joint. Get the cause found first, otherwise the next attempt will fail too.