Hampshire · England
Remedial Sealant in Liss Forest
Failed sealant joints in Liss Forest need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Decorators’ caulk around a bath or shower
- Beads that never stuck properly
- Torn expansion joints
How we handle remedial sealant in Liss Forest
Some sealant jobs aren’t a simple reseal, because someone has already had a go. New sealant over old, smeared beads, unsuitable products and hidden mould all need stripping out. Typical jobs include smears and lumps from a botched reseal and repeat leaks from the same joint, on leaking tray & enclosure joints, shrunken worktop sealant and mouldy bath & shower sealant.
Homes around Liss Forest are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
There’s a 12-month guarantee on every job.
- Location
- Liss Forest (GU33)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Ask why a joint failed before redoing it
- Never fill a movement joint with mortar or grout
- Have loose fittings fixed before resealing
- Keep bleach and abrasives off the bead
Keep an eye on the joint at first, especially if movement was the problem. If anything changes, just phone 0345 464 0079 or email us.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Early action keeps it to a sealant job.
Remedial sealant around Liss Forest
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around St Saviour's, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Schools such as Liss Infant School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Liss Forest is about 4 miles north-east of Petersfield, in Hampshire. Homes, rented property, offices and hotels in Liss Forest can book us for remedial sealant, old or new, large or small. Every job comes with our 12-month guarantee. Liss Forest is one of 683 places in Hampshire where we work for remedial sealant. We also work in Portsmouth, about 19 miles from Liss Forest.
All of GU33 is within our area for remedial sealant. You’ll find streets such as Forest Road, Warren Road and Newfield Road, all of which we cover. Close by, we work in The Mint (1 mile south-east), Liss (1 mile south), West Liss (1 mile south), Greatham (1 mile north) and Rake (1 mile south-east). Within a short drive, we also cover Havant (14 miles south), Fleet (15 miles north), Horndean (11 miles south-west), Aldershot (14 miles north), Alton (8 miles north-west) and Waterlooville (13 miles south-west).
What’s near Liss Forest
Locally, jobs take us to homes and businesses close to The Temple Inn and the streets around them. The nearest railway station is Liss station, roughly 0.7 miles south-west of the centre. A little further out are Chase Community Hospital (3.8 miles north) and The Romany Museum (3.7 miles north-west). Green spaces nearby include Liss Riverside Railway Walk North and Wheatham Hill.
More services for Liss Forest
What happens on the day
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours for most joints, depending on how much old sealant has to come out. In a small place like Liss Forest, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at how the sealant has failed and check for movement or a leak path.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
How to prepare
- Mention any parking rules near the property
- Mention any sign-in or site rules at work premises
- Mention if the joints have been sealed before
How to get a quote
Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or email us with the details and send pictures if you have them.
Read more
Signs you need remedial sealant in Liss Forest
Silicone only bonds to surfaces that are clean and dry. Soap film, dust, damp or old residue stop it gripping, so it starts lifting sooner than it should.
Common reasons people contact us include:
- Wide, uneven beads that look worse than the old ones
- Sealant peeling off a dusty or damp surface
- Worktop sealant that has shrunk and split
- Products that weren’t meant for the joint
If you let a flat or house near Liss station, botched sealant from a previous quick fix is easier to strip out between tenants.
What your quote should include
- Which colour the sealant will be
- What product goes in the joint
- What happens if the job turns out different
- Whether they seal over old material or remove it
Work for landlords, hotels and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
What happens if it’s left?
Ripping out a bathroom is not usually needed. If the bath, tray and tiles are sound, remedial resealing normally puts it right. Where something else has failed, you’ll hear it from us. In a small place like Liss Forest, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, phone 0345 464 0079 or email us and we’ll give you an honest view and a quote.
What you get with us
- Colour agreed with you before any work starts
- A choice of colours where the product allows
- Domestic, commercial and hotel work
- We’re fully insured
Take a look at how sealant jobs are priced and what customers say.
How the job changes by surface
Mouldy bath & shower sealant
Repeat mould generally points to a damp, poorly aired room. Along with resealing, we will mention if the room needs better ventilation.
Movement & expansion joints
Joints filled with mortar, grout or rigid filler cannot move. Where it can be raked out, we replace it with flexible sealant.
Common questions in Liss Forest
Is Liss Forest in your area for remedial sealant?
Yes. We work across London and the South East, and Liss Forest is part of that. You can phone 0345 464 0079 or email us and let us know what needs doing.
Can you help a landlord with a rental near Liss station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.
Do you work for hotels and businesses?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. We will take all the sealant out, look for why it failed and reseal it properly.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
What if resealing won’t fix my leak?
Then we explain what we’ve found. You may need a plumber or bathroom fitter.
Do you offer different sealant colours?
In most cases you can choose. We’ll explain which colours are available.
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.