Hampshire · England
Remedial Sealant in Hill Brow
Problem with your failed sealant joints in Hill Brow? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Torn expansion joints
- Beads that never stuck properly
- Worktop sealant that has shrunk and split
About our remedial sealant in Hill Brow
The wrong product in the wrong joint fails however neatly it’s applied. Out it comes, and in goes a sealant suited to the job. We work on botched or over-sealed joints, shrunken worktop sealant and expansion joints, and people most often call us about black mould underneath the bead and floor or wall movement joints that have failed.
For a small place like Hill Brow, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.

- Place
- Hill Brow (GU33)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How the job changes by surface
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, and then we reseal it neatly.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Keep bleach and abrasives off the bead
- Ask why a joint failed before redoing it
- Air the bathroom so the sealant can dry
- Always have old sealant cut out, not covered
Keep the room ventilated: use the extractor or open a window after showering.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
Places near Hill Brow
What else we do in Hill Brow
Can I do it myself?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Hill Brow homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings. Hill Brow has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
If you look after a building such as Liss Junior School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Liss station? Then a joint that keeps failing is best fixed properly while the property is empty.
Hill Brow is about 3 miles north-east of Petersfield, in Hampshire. Jobs in Hill Brow get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 683 places across Hampshire, large and small. Portsmouth is on our list too, around 18 miles away.
We cover every part of the GU33 postcode area for remedial sealant and the streets around it. Local streets include London Road, Plantation Road and Malvern Road, all of which we cover. You’ll find Hill Brow on the B2070, so it’s easy for us to get to with everything needed for remedial sealant. Nearby, we also carry out remedial sealant in Durford Wood (1 mile west), Liss (1 mile north-west), West Liss (1 mile north-west), Rake (1 mile north-east) and The Mint (1 mile north). We also work in nearby towns such as Havant (13 miles south), Horndean (10 miles south-west), Alton (9 miles north-west), Waterlooville (12 miles south-west), Petersfield (3 miles south-west) and Purbrook (13 miles south-west).
Local landmarks in Hill Brow
Locally, jobs take us to homes and businesses close to Whistle Stop pub. For rail, the closest station is Liss station, roughly 1.1 miles north-west of the centre. Well-known places in the area include Bear Museum (3.4 miles south-west) and Petersfield Community Hospital (3.5 miles south-west). Open spaces near Hill Brow include Liss Riverside Railway Walk South and Wheatham Hill.
Why it’s worth doing now in Hill Brow
DIY removal often leaves scratches and a film of residue, and any film left behind stops new sealant sticking. Careful removal is most of a remedial job. Where a wall is exposed, as many are in small places like Hill Brow, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why book with us
- Homes, businesses and hotels
- 4.9 on Google from 180+ five-star reviews
- Trusted Arbo and Everbuild sealants
- You choose the colour before work begins
Take a look at our cost guide or what customers say.
Landlords, agents and businesses in Hill Brow
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We work for landlords and agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
What we’re called out for in Hill Brow
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, and the sealant lifts or goes mouldy from underneath.
People generally contact us when they notice one of these:
- A shower that leaks however often it’s resealed
- Beads that never stuck properly
- Kitchen joints letting water behind the worktop
- Sealant applied over old sealant that has lifted
Homes close to Rake Mission Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Before booking anyone
- Who does the work, and how experienced they are
- What preparation is included
- When the joint can take water or movement
- Which colour the sealant will be
Hill Brow: your questions answered
Do you work in hotels near Hill Brow?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can you help a landlord with a rental near Liss station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
What if resealing will not fix my leak?
We will tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, so we will not pretend it will.
Do you guarantee remedial jobs?
Yes. Every job comes with our 12-month guarantee.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
How much does remedial sealant cost in Hill Brow?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little.
Can I choose the sealant colour?
Most of the time, yes. We’ll explain which colours are available and agree one before we start.
What we do, step by step
You don’t need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the work takes a few hours, depending on how many layers have to come out for a typical job. Somewhere as small as Hill Brow, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
How to prepare
- Tell us about any water getting in
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
How to get a quote
For a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
