Argyll and Bute · Scotland

Remedial Sealant in Strone

Removing failed, mouldy or leaking sealant and putting it right for householders, landlords and businesses in Strone. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.

  • Beads that never stuck properly
  • Smears and lumps from a botched reseal
  • Torn expansion joints

Trusted remedial sealant in Strone

What we do, step by step

There is not much for you to do on the day. Show us the job and we will take it from there. The work itself takes a few hours for most joints, depending on how much old sealant has to come out. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

Getting ready for the visit

  • Clear the area around the work
  • Tell us about any previous sealing or DIY attempts
  • Try not to wet indoor joints just before the visit

Get a quote

For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work and give you a clear price.

Get a price

Related advice

Remedial sealant for homes and businesses in Strone

If a joint has been resealed and is leaking again, it’s worth a proper look. Send pictures when you send an email to info@mrmastic.co.uk, and say how long ago it was last done. Typical jobs include kitchen joints letting water behind the worktop and wide, uneven beads that look worse than the old ones, across leaking tray & enclosure joints, shrunken worktop sealant and failed movement joints.

Bathrooms in smaller places like Strone work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

A 12-month guarantee comes as standard, so you are covered after we’ve gone.

Sealant gun close-up on a shower enclosure wall joint
Place
Strone (PA23)
Region
Argyll and Bute
Guarantee
A year, on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026

Landlords, agents and businesses in Strone

We also work for property managers and facilities teams. Several sites can go on one quote, and we’re fully insured.

In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.

Bathrooms and kitchens in Strone

Strone is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.

If you live in an older home near Strone Church, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Dunoon Grammar School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Strone is about 6 miles north-west of Greenock, in Argyll and Bute. Jobs in Strone get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Our area takes in 118 places across Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, roughly 26 miles from Strone.

Here we cover the PA23 postcode area for remedial sealant. You will find streets such as High Road, Shore Road and Westfield, all of which we cover. Other places close to Strone include Hunters Quay (1 mile south), Sandbank (1 mile west), Kilmun (2 miles north-west), Kirn (2 miles south) and Dunoon (2 miles south). We also work in nearby towns such as Helensburgh (7 miles east), Rothesay (12 miles south-west), Rhu (5 miles north-east), Garelochhead (7 miles north-east), Port Bannatyne (11 miles south-west) and Innellan (7 miles south). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.

Local landmarks in Strone

The nearest railway station is Gourock station, about 3.8 miles south-east of the centre. Nearby you’ll also find Cowal Community Hospital (2.1 miles south-west) and Castle House Museum (2.9 miles south). For a walk, there’s Lyle Hill and Loch Loskin.

Map of Strone © OpenStreetMap contributors

Strone questions

Will you come out to Strone?

Yes. Strone is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Is Strone in your area for remedial sealant?

Yes. We work across all of Scotland, and Strone is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.

Do you fix expansion and movement joints?

Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, and reseal with a flexible product.

What if the leak is not the sealant?

That’s why we look for the cause first. If the fault is elsewhere, you’ll know before any work is done.

Where do you work from?

Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.

What should I tell you?

A short description and the location. We will ask anything else we need to know.

Are you insured?

Yes. We are fully insured.

Is it messy?

We keep the work tidy. Nearby surfaces are protected.

Do you need remedial sealant in Strone?

All sealant wears out eventually. Over the years it shrinks, hardens and gets colonised by mould, faster where ventilation is poor. Then the only fix is removal and a new bead.

The problems people generally mention when they call are:

  • Black mould underneath the bead
  • Worktop sealant that has shrunk and split
  • Caulk or the wrong sealant used in a wet area
  • Thick, messy sealant smeared over tiles

Rented homes near Gourock station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.

Before you book anyone

  • What the quote includes, VAT included or not
  • The length of the guarantee
  • Whether they’re fully insured
  • What happens if they find a problem under the old sealant

Our hiring checklist

What affects the cost of remedial sealant

The quote reflects the job in front of us. We look at:

  • The old material and how stubborn it is
  • Whether there’s mould to deal with
  • When we can work, for business premises
  • Access and height

The cost reflects the work involved, not guesswork. That is why we ask about the job first and agree the price before starting.

Helping us quote

Photos help, but a description is a good start. Please mention:

  • Any previous sealing or DIY work
  • The type of property
  • A few pictures by email, if you can
  • Where the job is, and your postcode

Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we will come back to you with a quote.

Leave it or put it right?

Spraying mould remover on a sealed-over joint doesn’t reach what’s underneath. The layers have to come out. In an older home around Strone, damp from a failed joint can get into timber and plaster.

Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.

Why Strone customers choose us

  • Old sealant always removed completely
  • Rated 4.9 stars on Google
  • Fully insured
  • Quality sealants from Arbo and Everbuild

Read what affects the cost and customer reviews.

Keeping the joints in good condition

After the cure time, these simple habits help:

  • Keep movement joints clear of mortar and paint
  • Keep bleach and abrasives off the bead
  • Check trays and worktops don’t move
  • Do not wait for a small gap to become a leak

Keep an eye on the joint at first, especially if movement was the problem. If anything changes, just email us at info@mrmastic.co.uk.

Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into whatever is behind or below. Early action keeps it to a sealant job.

Should I try it myself first?

If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job