Argyll and Bute · Scotland
Remedial sealant & repairs in Hunters Quay, Argyll and Bute
Removing failed, mouldy or leaking sealant and putting it right for Hunters Quay, backed by a 12-month guarantee. Ask us for a quote.
- A shower that leaks however often it’s resealed
- Smears and lumps from a botched reseal
- Dark patches showing through the sealant
Remedial sealant in Hunters Quay
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. Common call-outs are for products that weren’t meant for the joint and wide, uneven beads that look worse than the old ones, on expansion joints, leaking tray & enclosure joints and failed movement joints.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Hunters Quay (PA23)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Leave it or put it right?
Stripping out botched sealant adds time to a reseal, but not by much: the work takes a few hours for most joints, depending on how much old sealant has to come out. It’s far less disruption than resealing the same joint again and again. In an older home around Hunters Quay, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- We agree the colour with you first
- Fully insured
- Tidy, careful work
- Any old sealant cut out fully, not covered over
Read our cost guide and customer reviews.
Common questions in Hunters Quay
Will you come out to Hunters Quay?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you work in hotels near Hunters Quay?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can you remove old sealant without damaging the bath?
Yes. Careful removal is most of a remedial job, particularly on softer surfaces like acrylic.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you remove the old sealant?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply drop us a line at info@mrmastic.co.uk.
Landlord and commercial work in Hunters Quay
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
For anyone letting property in or around Hunters Quay, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
How it works
When we arrive, we look over the joints with you first. Surfaces next to the work are protected before we start. Most jobs take a few hours for most joints, depending on how much old sealant has to come out. For a place like Hunters Quay, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Read more
What the job involves on each surface
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, tray edges and screen profiles included.
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. We strip it, degrease the joint and reseal.
What we’re called out for in Hunters Quay
Joint depth matters. Sealant packed too deep, or stuck to the back of the joint as well as the sides, cannot stretch, and tears at the first real movement. Backing sets the depth and stops that.
Keep an eye out for these signs:
- Movement joints that have split or pulled away
- Products that weren’t meant for the joint
- Sealant peeling off a dusty or damp surface
- Repeat leaks from the same joint
Managing a site like Kirn Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What to look for in a quote
- How hidden problems are handled
- What guarantee comes with the work
- What preparation is included
- Is VAT in the price?
Remedial sealant around Hunters Quay
Hunters Quay is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
For an older house near a landmark such as Kirn Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you let a flat or house near Gourock station, botched sealant from a previous quick fix is easier to strip out between tenants.
Hunters Quay is about 3 miles west of Gourock, in Argyll and Bute. Across the PA23 area, we can carry out remedial sealant at your property. Hunters Quay is one of 118 towns and villages in Argyll and Bute we cover. Our Glasgow page covers work nearby.
Here we cover the PA23 postcode area for remedial sealant. Neighbouring places we cover for remedial sealant include Kirn (1 mile south-west), Dunoon (1 mile south-west), Strone (1 mile north), Sandbank (2 miles north-west) and Kilmun (3 miles north-west). We also work in nearby towns such as Helensburgh (7 miles east), Rothesay (11 miles south-west), Rhu (6 miles north-east), Garelochhead (9 miles north), Port Bannatyne (10 miles south-west) and Innellan (6 miles south-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Landmarks near Hunters Quay
Locally, jobs take us to homes and businesses close to Dunoon Grammar School and the streets around them. For rail, the closest station is Gourock station, roughly 3.3 miles east of the centre. Nearby you’ll also find Dunoon Castle (1.7 miles south-west) and Cowal Community Hospital (1.2 miles south-west). Green spaces nearby include Loch Loskin and Lyle Hill.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
What affects the quote in Hunters Quay
Your quote is based on your job. We look at:
- The old material and how stubborn it is
- The size of the job
- Which sealant suits the joint
- How many rooms, windows or areas are involved
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
What to tell us for a quote
What to tell us when you ask for a quote:
- Where the job is, and your postcode
- Whether it’s a home or a business
- The problem you’ve noticed
- Pictures of the joints, sent by email
For remedial sealant in Hunters Quay, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.