Kent · England
Remedial Sealant in Stocker's Head
Problem with your failed sealant joints in Stocker's Head? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Thick, messy sealant smeared over tiles
- Sealant applied over old sealant that has lifted
- A shower that leaks however often it’s resealed
Remedial sealant in Stocker's Head
Some sealant jobs aren’t a simple reseal, because someone has already had a go. New sealant over old, smeared beads, unsuitable products and hidden mould all need stripping out before the joint can be done properly. If you’re dealing with kitchen joints letting water behind the worktop and thick, messy sealant smeared over tiles, we can help.
For a small place like Stocker's Head, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
You are covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or email us.
- Place
- Stocker's Head (TN27)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of remedial sealant
We quote each job individually. This is what makes a difference:
- Working hours on commercial sites
- The number and length of the joints
- Whether the work is at height
- The old material and how stubborn it is
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- Whether it’s a home or a business
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
- Photos by email, if that’s easy
To get a quote, call 0345 464 0079 or email us with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Different surfaces, different methods
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We take care not to make it worse, and tell you about any damage we find.
For landlords and businesses
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured for the work.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Deal with small splits early
- Look for stains below bathrooms now and then
- Keep the room well ventilated
- Keep bleach and abrasives off the bead
Where we’ve pointed out another fault, have it put right, or the new joint may fail again.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into whatever is behind or below. Early action keeps it to a sealant job.
Nearby places to Stocker's Head
More services for Stocker's Head
When it isn’t the sealant
Before you book, it’s worth knowing the limits too:
- A tray or bath that’s cracked
- Movement from fittings that aren’t supported
- Water damage behind tiles that needs a tiler
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly before you book.
What we seal
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Expansion joints
- Failed movement joints
Leave it or put it right?
Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours for most joints, depending on how much old sealant has to come out. It’s far less disruption than resealing the same joint again and again. In a small place like Stocker's Head, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why us?
- Anti-fungal sanitary silicone in wet areas
- Quality sealants from Arbo and Everbuild
- We are fully insured
- 4.9 on Google from 180+ five-star reviews
See how sealant jobs are priced and our reviews.
What remedial sealant looks like in Stocker's Head
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Charing station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. Managing a site like Charing Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Homes close to Church of St Peter and St Paul include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Stocker's Head is about 6 miles north-west of Ashford, in Kent. Whether you are in the middle of Stocker's Head or further out, remedial sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Stocker's Head is one of 922 towns and villages in Kent where we work. For nearby work, see our Chelmsford page, about 39 miles away.
Work in TN27 works the same way as everywhere else we cover. We also cover the places around Stocker's Head: Charing Hill (1 mile west), Stalisfield (2 miles north), Stalisfield Green (2 miles north), Paddock (2 miles east) and The Valley (2 miles north). Further out, we also cover Maidstone (13 miles west), Ashford (6 miles south-east), Canterbury (12 miles east), Sittingbourne (9 miles north), Whitstable (13 miles north-east) and Faversham (7 miles north-east).
Landmarks near Stocker's Head
Around Stocker's Head, our work takes us to homes and buildings near King's Head Public House and Spuckles and Kennelling Woods. The nearest railway station is Charing station, about 1.3 miles south-west of the centre. Nearby you will also find Newnham Castle (4.7 miles north).
Stocker's Head: your questions answered
Is Stocker's Head in your area for remedial sealant?
Yes, Stocker's Head is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and tell us what needs doing.
Do you work for landlords with property near Charing station?
Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear price.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
What if the leak isn’t the sealant?
In that case, we tell you what we’ve found. A plumber or fitter may be needed.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
How long before the joint can be used?
It depends on the product and the conditions. We tell you how long to leave it before we go.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
How the visit works
The work is kept neat and contained to the joints we are treating. The job normally takes a few hours, depending on how many layers have to come out. For a village or hamlet like Stocker's Head, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
Before we arrive
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
- Try not to wet indoor joints just before the visit
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.